• 제목/요약/키워드: mixed noise

검색결과 341건 처리시간 0.027초

고압 회전기 부분방전 신호에 혼합된 인접상 유도 잡음 제거 기법 (A Technique for Removing Adjacent Induction Noise Mixed with Partial Discharge Signals of High Voltage Rotating Machines)

  • 윤영우;이상화;황돈하;추영배;강동식
    • 전기학회논문지
    • /
    • 제58권2호
    • /
    • pp.335-341
    • /
    • 2009
  • Analysis of the partial discharge signal, a technique to diagnose the stator winding insulation is a key function for the diagnosis of high voltage rotating machines and requires high precision. To satisfy this requirement, various denoising techniques such as filtering and differential methods were proposed. However, these techniques can not eliminate a adjacent induction noise that decreases reliability of the diagnosis. A simple novel denoising algorithm, therefore, is proposed for removing the adjacent induction noise in this paper. The algorithm shows good performance in the real partial discharge signals measured by 13kV class capacitive couplers installed at hydro-generator in Dae-cheong Dam.

A Study on Wavelet-based Denoising Algorithm for Signal Reconstruction in Mixed Noise Environments

  • Bae, Sang-Bum;Kim, Nam-Ho
    • Journal of information and communication convergence engineering
    • /
    • 제5권1호
    • /
    • pp.1-6
    • /
    • 2007
  • In the process of the acquisition, storage, transmission of signals, noises are generated by various causes and the degradation phenomenon by noises tends to generate serious errors for the signal with information. So, in order to analyze and remove these noises, studies on numerous mathematical methods such as the Fourier transform have been implemented. And recently there have been many ongoing wavelet-based denoising algorithms representing excellent characteristics in time-frequency localization and multiresolution analysis, but the method to remove additive white Gaussian noise (AWGN) and the impulse noise simultaneously was not given. So, to reconstruct the corrupted signal by noises, in this paper a novel wavelet-based denoising algorithm was proposed and using signal-to-noise ratio (SNR) this method was compared to conventional methods.

바닥충격음 완충재의 동적특성에 영향을 미치는 요인 분석 (Analysis of Influence Factors on Dynamic Properties of Floor Impact Noise Insulation Materials)

  • 김흥식;주시웅;김대준;김병진
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.946-949
    • /
    • 2005
  • In this paper, influence factors on dynamic properties of floor impact noise insulation materials are suggested. For this purpose measurements on the dynamic stiffness and the loss factor of resilient materials are carried out by Korea standard (KS F 2868) according to the change of density, thickness, design pattern, and composition of materials. As a result the values of dynamic stiffness was decreased at high density and thick thickness, and that of loss factor was increased at low density. For dynamic properties, the pattern of lattice and waffle type material is better than that of plat type, and the mixed composition of materials is better than the composition of double layer materials at same thickness.

  • PDF

Evaluation of Artificial Intelligence-Based Denoising Methods for Global Illumination

  • Faradounbeh, Soroor Malekmohammadi;Kim, SeongKi
    • Journal of Information Processing Systems
    • /
    • 제17권4호
    • /
    • pp.737-753
    • /
    • 2021
  • As the demand for high-quality rendering for mixed reality, videogame, and simulation has increased, global illumination has been actively researched. Monte Carlo path tracing can realize global illumination and produce photorealistic scenes that include critical effects such as color bleeding, caustics, multiple light, and shadows. If the sampling rate is insufficient, however, the rendered results have a large amount of noise. The most successful approach to eliminating or reducing Monte Carlo noise uses a feature-based filter. It exploits the scene characteristics such as a position within a world coordinate and a shading normal. In general, the techniques are based on the denoised pixel or sample and are computationally expensive. However, the main challenge for all of them is to find the appropriate weights for every feature while preserving the details of the scene. In this paper, we compare the recent algorithms for removing Monte Carlo noise in terms of their performance and quality. We also describe their advantages and disadvantages. As far as we know, this study is the first in the world to compare the artificial intelligence-based denoising methods for Monte Carlo rendering.

민항기와 군용기가 혼합된 공항 주변지역의 항공기 소음에 대한 거주자 반응 (Subjective Response for the Aircraft Noise in the Region around Airport mixed with Commercial and Military Aircrafts)

  • 백형배;박현구;김선우
    • KIEAE Journal
    • /
    • 제9권1호
    • /
    • pp.99-106
    • /
    • 2009
  • This study aims to survey the acoustical environment in the region around airport where there are various transportation noises such as aircraft noise, railway noise and traffic noise, and to analyze the subjective response on the noise to the people who live in house or work in office nearby airport. Measurement and subjective response evaluation were carried out at the same time and outdoor noise level was measured all day long to calculate one day results such as average Leq or one day WECPNL etc. The results showed that the military aircraft produces very high level comparing with commercial aircraft, for instance the sound level of commercial outdoor was lower than that of military aircraft indoor. Double and triple window were more effective for controlling the noise than single window, which showed the possibility of sound insulation treatment by installing windows having higher sound insulation performance. Finally the subjective response was resulted that the most annoying noise is from aircraft and counterplan they hope is 'airport moving out'. Leq 65 dB(A), the criteria value of sound insulation treatment, was corresponding to the subjective response of median annoyance '4' out of 7th scale.

초고층 주상복합아파트 거주자의 주거만족도 (The Residential Satisfaction of Residents in High-rise Mixed-use Apartments)

  • 강순주;이수현
    • 대한가정학회지
    • /
    • 제42권6호
    • /
    • pp.1-12
    • /
    • 2004
  • This study investigates residents' living satisfaction with high-rise, mixed-use apartments built in the structures of reinforced concrete construction(RC) and with steel framed, reinforced concrete construction(SRC). The following study results were obtained: 1) Residents expressed below average satisfaction (below 3.0) with the common-area landscape and environmentally-friendly factors, children's playground and its facilities, community service for residents' by the management offices and utility plan. 2) According to the satisfaction of sound environment, residents of the SRC group expressed above average satisfaction. It can be concluded that noise problems around the residential area of the SRC group was well solved in this study. However, the residents of the SRC group expressed low satisfaction with the freshness of indoor air, humidity, and smell in the living quarters. 3) High-rise, mixed-use apartments should accommodate a familial life cycle, be designed as an environmentally friendly resting place in harmony with city life, and provide various communal programs for residents.

초고층 주상복합아파트 거주자의 주거만족도 (The Residential Satisfaction of Residents in the High-rise Mixed-use Apartment)

  • 이수현;강순주
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2003년도 정기총회 및 추계학술대회
    • /
    • pp.145-149
    • /
    • 2003
  • This study is to investigate residents' living satisfaction with high-rise mixed-use apartment complexes built in the structures of the reinforced concrete constructing and the steel framed reinforced concrete construction. The results of this study were obtained as follows: 1. Residents expressed below average satisfaction (below 3.0) with the common-area landscape and environmentally-friendly factors, children's playground and its facilities, community service for residents' by the management offices and the plan of utility. 2.According to the satisfaction of sound environment, residents of SRC group expressed above average satisfaction; it can be concluded that problems of causing noise around the residential area of the SRC and S groups were well solved in this study. However, satisfaction with the freshness of indoor air, humidity, and smell in the living quarters was rated low by the residents of SRC group. 3. High-rise mixed-use apartment complexes should accomodate families's life cycle, design an environmentally-friendly resting place in harmony with city life, and provide various communal programs for residents.

  • PDF

입력 위상 잡음 억제 및 체배 주파수의 듀티 사이클 보정을 위한 VCO/VCDL 혼용 기반의 다중위상 동기회로 (A Multiphase DLL Based on a Mixed VCO/VCDL for Input Phase Noise Suppression and Duty-Cycle Correction of Multiple Frequencies)

  • 하종찬;위재경;이필수;정원영;송인채
    • 대한전자공학회논문지SD
    • /
    • 제47권11호
    • /
    • pp.13-22
    • /
    • 2010
  • 본 논문은 입력 클록의 고주파 위상 잡음 억제와 정확한 듀티 사이클을 갖는 체배 주파수 생성을 위하여 Voltage-Controlled Oscillator(VCO)/Voltage-Controlled Delay Line(VCDL) 혼용기반의 다중 위상 Delay-Locked Loop(DLL)를 제시한다. 이 제안된 구조에서, 다중 위상 DLL은 혼용 VCO/VCDL의 입력 단에 nMOS 소스 결합 회로 기반의 이중 입력 차동 버퍼를 사용한다. 이것은 고주파 입력 위상 잡음 억제를 위하여 전 대역 통과 필터 특성을 갖는 기존 DLL의 입/출력 위상 전달을 저주파 통과 필터 특성을 갖는 PLL의 입/출력 위상 전달로 쉽게 변환시킬 수 있다. 또한, 제안된 DLL은 추가적인 보정 제어 루프 없이 단지 듀티 사이클 보정 회로와 위상 추적 루프를 이용하여 체배 주파수의 듀티 사이클 에러를 보정할 수 있다. $0.18{\mu}m$ CMOS 공정을 이용한 시뮬레이션 결과에서, 제안된 DLL의 출력 위상 잡음은 800MHz의 입력 위상 잡음을 갖는 1GHz 입력 클록에 대하여 -13dB 이하로 개선된다. 또한, 40%~60%의 듀티 사이클 에러를 갖는 1GHz 동작 주파수에서, 체배 주파수의 듀티 사이클 에러는 2GHz 체배 주파수에서 $50{\pm}1%$이하로 보정된다.

터빈 발전기의 부분방전 신호 중 노이즈 제거 방법 (A method to reject noise signals in partial discharge signals of turbine generator)

  • 박영훈;박부견;김성현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.240-242
    • /
    • 2005
  • It is well known that the PD (Partial Discharge) signals are generated if insulators have some defects such as voids in electrical facility and various PD detection methods are developed for preventing electrical troubles. So, an interest for the PD signals is higher and higher according to the high concern for the defects detection method of the aging electrical facility. When the equipment to detect PD signals installed at site and it works, a lot of noises flow in the equipment from surrounding situation and it will be mixed with original PD waveform. So we can not get the desired PD waveform. Therefore, there are many trial to reject or suppress the noise from the PD signals from long times ago. The greater of them used the hardware such as bridge circuits and frequency filters to suppress the noise. This paper proposed a novel noise rejection method in acquired data from PD detection equipment. The noise has the irregular phase and higher signal level than real PD, and noise decision is performed after inspection of pulse distribution in ${\Phi}$-q-n graph of acquired data from PD detection equipments. By experimental results on high voltage electric equipments, it is shown that proposed method has good performance. It is expected that this noise rejection technology is useful in numeric calculation and trend management of PD level.

  • PDF

복합 잡음 제거를 위한 비선형 합성 필터에 관한 연구 (A Study on Nonlinear Composit Filter for Mixed Noise Removal)

  • 권세익;김남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.793-796
    • /
    • 2017
  • 영상신호는 신호를 처리하는 과정에서 다양한 잡음에 의해 훼손되어지며, 이러한 신호를 복원하기 위한 많은 연구가 이루어지고 있다. 영상에 첨가되는 잡음에는 salt and pepper 잡음, AWGN(additive white Gaussian noise) 및 두 잡음이 혼합된 복합잡음이 대표적이다. 따라서 본 논문에서는 복합잡음 환경에서 훼손된 영상을 복원하기 위해, 잡음 판단을 통해 국부 마스크의 중심화소가 salt and pepper 잡음인 경우, 2차원 스플라인 보간법 및 메디안 필터로 처리하고, AWGN인 경우, 화소변화에 따른 가중치 필터로 처리하는 알고리즘을 제안하였다.

  • PDF