• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.655-662
• /
• 2019

This study evaluated the multi-bonding performances of timbers as well as those of reinforcement and timber to obtain data for preparing guidelines regarding the use of timbers as large structural members. For the multi-bonding performances of timbers, four types of bonding surfaces were prepared according to the pith position. For the bonding performances of FRP (fiber-reinforced plastic)/steel plate and timber, a total of 11 types of specimens were produced for the selection of the appropriate adhesive. The bonding performances of the produced specimens were evaluated through a water soaking delamination test, a water boiling delamination test, and a block shear strength test. The test results showed that the bonding strength of the bonding surface according to the pith position was highest in the specimen for which the two sections with the pith at the center of the cross-section on timber and between the bonding surfaces (the tangential and radial sections were mixed) were bonded. Furthermore, the specimens for which the section (radial section) with the pith on the bonding surface of the timber was bonded showed a high delamination percentage. The results of the block shear strength test showed that the bonding section did not have a significant effect on the shear strength, and that the measured wood failure percentage was higher than the KS standard value. The PVAc adhesive showed the highest bonding strength between larix timber and GFRP (glass FRP). Furthermore, the epoxy and polyurethane adhesives showed good bonding strength for CFRP (carbon FRP) and structure steel, respectively.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.4
• /
• pp.87-104
• /
• 2007

The objective of this study is to estimate the load of pollutants caused from the forest area among non-point pollutants within the Juam lake. The surveyed forest area was classified into broad-leaved, conifer, mixed and herbage area by forest tree type. Water quality and flux were investigated under rainfall and non-rainfall, respectively. Then, pollutant loading was evaluated by using the values of unit pollutant loading factor of each point and area of forest zone. Water quality analysis results of runoff by forest tree types were as follows. - Annual BOD, $COD_{Mn}\;and\;COD_{Cr}$ concentration of runoff in conifer area was high, and particle and biological recalcitrant compounds were flowed highly. - SS, T-N and T-P concentration was high in runoff from broad-leaved area, and biological degradable compounds was flowed. - Water quality of water from valley was maintained good under non-rainfall and could be utilized as fresh drinking water. Through water quality standard investigation, a countermeasure establishment was necessary to secure a good quality of drinking water - BOD, $COD_{Mn},\;and\;COD_{Cr}$ concentration of Bo-sung river was higher 1.5 times than other 2 streams, and because of high T-N, and T-P concentration in Songgwang stream, the management for this was necessary.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.37-43
• /
• 2010

This study carried out to develop barrier-free certification program in forest trail. It is done to provide the certification system presented about certification organized, certification standard and indexes, evaluation method and operation plan. In order to develop certification program in forest trail, detailed measurement index must be developed earlier based on an accessbility, a stability, a preservation and a walking continuity. The suitable forest trail for weak pedestrian was investigated that running slope should be 1/20(5%) maximum, cross slope cannot exceed 1/50(2%) maximum and clear tread width should be above of minimum 90cm. In addition, the trail type is designed as a mixed trail system which is a combination of the loop and the line form and its distance should be 225~675m. Finally, forest trail should be manage sustainably by having regular monitoring and evaluation.

• The Korean Journal of Ecology
• /
• v.26 no.6
• /
• pp.327-333
• /
• 2003

A mixed forest of pines (Pines densiflora and Pinus rigida) and an oak forest (Quercus mongolica) in Mt. Kwanak in Seoul were limed with 1.5 t/ha and 3 t/ha of dolomite in 1993 and investigated the effects of liming on the chemical changes in the 0-5 cm and 5∼10 cm layers of soil from 1994 to 1995. Soil pH values were greater in the limed plots than in the control plot by the unit of 0.1-0.6 in the pine forest and 0.1∼0.2 in the oak forest. Ca concentrations in the limed plots were greater than those in the control plots in both the pine and oak forests. A considerable increase in Mg concentrations in soil was observed in the limed plots. K and Na concentrations in the limed plots appeared to decrease in both the pine and oak forests two years after liming. Although Al concentrations were greater in the limed plots than in the control plot in the pine forest in 1994, there was a tendency of a decrease in the concentration of this metal in the limed plots in 1995. Mn concentrations also tended to decrease in the limed plots in both the pine and oak forests.

• Journal of Forest and Environmental Science
• /
• v.36 no.4
• /
• pp.259-266
• /
• 2020

Poplar trees from the Salicaceae family over the years have been utilized for various reasons which include prevention of deforestation as well as phytoremediation. This study aims to determine the optimal pre-treatment and soil conditions required for propagation of poplar cuttings for increased initial adaptability and survival rate. Five poplar clones (Hanan, 110, 107, DN-34, 52-225) were selected for IBA, soil composition treatments on propagation. IBA pre-treatment of cuttings were utilized 0, 10, and 100 mg l-1 concentrations. Soil compositions were amended with TKS-2+perlite 2:1 (v:v) and sandy clay loam mixed with artificial soil. According to the greenhouse results 10 mg l-1 of IBA showed a significant increase in plant height whereas 100 mg l-1 inhibited plant growth except in clone 110. Soil composition severely affected root growth and hence overall growth of the clones. Sandy clay loam soil had poor to stunted growth compared to TKS-2+perlite.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.102-109
• /
• 1998

This study was conducted to find out the growth characteristic of mixed-seeding in the grasses for slope revegetation measures. Seeding treatment with six combination types of five grasses used for this experiment such as orchardgrass(Dactylis glomerata 'Potomac'), perennial ryegrass(Lolium perenne 'Manhattan'), tall fescue(Festuca arundinacea 'Jaguar'), kentucky bluegrass(Poa pratensis 'Majestic') and weeping lovegrass(Eragrostis curvula). The growth of orchardgrass, perennial ryegrass and tall fescue were good on mixed-seeding condition in case of number of individuals, heights and coverages at this experiment. These plants will useful for revegetation measures mixed-seeding, but weeping love grass and kentucky bluegrass did not show a desirable growth in mixed-seeding condition, and these plant prefered mixed seeding to single seeding. Regeneration percents of orchardgrass, perennial ryegrass and tall fescue were higher than that of weeping love grass and kentucky bluegrass, and coverage kept on good condition through one year after seeding, therefore, these plants will effective for initial stage revegetation measures.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.35-41
• /
• 2009

The new way of utilization of Hanji need to develop for adding high value added. An watermarked Hanji was prepared with non-mulberry mixed fibers and the properties were investigated. The mechanical properties of non-mulberry fiber mixed Hanji were very similar to mulberry fiber Hanji. The non-mulberry fiber mixed Hanji was a little brighter than original Hanji. The air permeability and pore size of the hot pepper fiber mixed Hanji were decreased depending on the content of hot pepper fiber. The printing ability of watermarked Hanji made of non-mulberry mixed fibers was higher than that of original paper mulberry Hanji. The preservation properties of non-mulberry fiber mixed watermarked Hanji were almost same as those of the original Hanji.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.4
• /
• pp.11-20
• /
• 2014

The objective of this study was to investigate the beating properties of two types of cotton pulps such as "cotton lint mixed pulp" and "cotton linter pulp". In order to improve refining characteristics, the effects of carboxymethyl-cellulose (CMC) pre-treatment, mixing ratio changes of cotton lint mixed pulp and cotton linter pulp, and refining load changes were analyzed. In mill application, it was possible to improve the refining characteristics and maintained the strength properties of the paper by applying increasing ratio of cotton linter pulp mixing and controlling the refining methods.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.2
• /
• pp.53-61
• /
• 1999

This study was conducted to determine the optimal collecting time and methods of utilization of forest topsoil as a seed-bank source for revegetation materials of slopes. From April to November of 1998, nursery seedbeds in the greenhouse of Seoul National University were seeded with mixtures of forest topsoil and seeds. The nursery seedbeds were treated to evaluate the effect of depths of forest topsoil and seeding amounts. Seasonal experiments with $3{\times}3$ factorial design were conducted in April, June and August. More than 40 seedlings/$m^2$ were observed as the naturally-emerged species in the plot, treated with the top-layer forest soil within the depth of 10cm. However, it was found, as seeding more seeds, the number of appearance of the naturally-emerged species reduced because of the heavy competition between the seeded and the naturally-emerged. According to the results of this research, it is recommended that seeding amount should be no more than 1,000 seeds/$m^2$ to avoid the severe competition. Also it was observed that the forest topsoil collected in spring(April) is better than that collected in summer. The more species of the naturally-emerged were found in the forest topsoil collected in spring. Forest-topsoil-mixed-materials as a seed-bank source could significantly increase the plant diversity and productivity. Effective use of forest topsoil as a seed-bank source may become a valuable tool in future restoration of disturbed slopes for promoting plant community diversity and recycling of spoiled-soils from the slopes.

• Korean Journal of Environment and Ecology
• /
• v.23 no.2
• /
• pp.161-168
• /
• 2009

This research aims at having a grip on the actual condition of vegetation distribution Byeonsanbando National Park and to propose a survey and drawing criteria for vegetation map. Thus, this research conducted a survey of the vegetation distribution on Byeonsanbando National Park through review of the literatures on vegetation surveys on the National Parks in the past and at the present and preparing criteria for survey and drawing of vegetation. The actual vegetation of Bye on san ban do National Park was classified into eight plant communities and other land; the Substitution forest, or natural forest was classified into four plant communities including Quercus variabilis community, deciduous forest, Pinus densiflora community, and mixed forest while afforested land was classified into four forest types: P. rigida forest, P. thunbergii forest, P. rigida forest, P. rigitaeda forest, P. rigida - thunbergii forest, etc. The area belonging to grade 7 in Nature Degree was found to be the largest, covering 69.1% in Byeonsanbando National Park while the area belonging to grade 9 was very rare, covering 0.36%. Thus, it is suggested that criteria for survey and drawing map needed for the systematic survey and management of vegetation in National Parks.