• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.179-189
• /
• 2000

The purpose of this research is to complement the existing researches on landfill bottom liners behavior during the periods of freeze and thaw. Landfill-related researches have been typically focused on small-scale soil samples that are often compacted under conditions different from those used in the field. Although these tests have been invaluable in clarifying the problem of freeze and thaw, extending the results of such experimental studies to prototype landfills are questionable. In this investigation, the author utilized a large scale laboratory simulation allowing inclusion of the field depth of the cover systems, layered soil profiles, rainfall simulation, a cold climate and boundary conditions similar to those encountered in the landfill. The soil materials were stabilized soils (mixed clays, cements, and minerals) instead of clays. The bottom liners are made up of drainage layer (30 cm), stabilized layer (75 cm), and leach collection layer (60 cm). The stabilized layers are made up of supporting layer (45 cm) and low permeable layer (30 cm) - consisting of $P_A\; and\; P_B$ layer. As a results, depths of penetration increased by about 2~5 more centimeters at rainfall simulated designs than those at no rainfall simulated designs (that is design 3, design 5 and design 7) - it increased by about 20mm/day in the bottom liners and frost heaves also increased it by a few millimeters. Also, a few cracks appeared partly. According to these results, we can surmise that the compacted stabilized soil is more reliable than the compacted clay liners for construction of the landfill liners.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.4
• /
• pp.320-332
• /
• 2003

This study evaluated the effect of the nutrition education about infant feeding on the change of mother's knowledge, attitude and practice of weaning. The subjects consisted of treatment group (n=54) and control group (n=34). The treatment group participated in 6 times nutrition education and 5 times surveys. Nutrition education for weaning of the treatment group improved nutrition knowledge, attitude and practice in infant feeding. Before education, mean scores of control group and treatment group were 7.3 and 7.5 respectively but there was no significant difference. Both group got low score in a statement about weaning period, but they got good score in a statement about weaning method. After education, treatment group got better score(9.1) than control group(8.3) significantly (p<0.05). Treatment group was more desirable than control group specially in a use of Sun-sik, sugar, salt and weaning food mixed with formula after education (p<0.05). Practice of spoon feeding was more frequent in treatment group after education, however, control group used sugar and commercial weaning food more frequently than treatment group(p<0.05). Intake frequency of cow's milk and cookies of infants at age 9-12 month in control group was higher than treatment groups(p<0.01). Thus the nutrition education to mother seems to be effective in achieving desirable dietary behavior of infants.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.614-618
• /
• 2003

$Sr_2Ru_{1-x}Cu_xO_{4-y}(0.0{\le}x{\le}0.5)$ compounds were prepared using a conventional solid state reaction. Based on the Rietveld refinements of X-ray diffraction results, it is revealed that $Sr_2Ru_{1-x}Cu_xO_{4-y}$ compounds are the single phases with K2NiF4 type tetragonal system in the range of 0=x=0.3, while the mixed phases of$Sr_2RuO_4$ and $Sr_2CuO_3$ in the range of $0.4{\le}x{\le}0.5$. By means of X-ray photoelectron spectroscopy, the valence states of Ru and Cu in $Sr_2Ru_{1-x}Cu_xO_{4-y}$, have been confirmed to 4+ and 2+, respectively. The bond length difference between $Ru-O_1 ({\times}4)\;and\;Ru-O_2 ({\times}2)\;in\;RuO_6$ octahedron is gradually decreased with increasing Cu content in $Sr_2Ru_{1-x}Cu_xO_{4-y}$, which results in the lower c/a ratio. So, it might be assured that the variation of local symmetry of $RuO_6$ octahedron is very closely related to the transporting property of $Sr_2Ru_{1-x}Cu_xO_{4-y}$ compounds. The behavior of resistivity discloses that the metallic property in $Sr_2RuO_4$ changes into the semiconducting one in proportion to the Cu content in $Sr_2Ru_{1-x}Cu_xO_{4-y}$.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.4
• /
• pp.1-15
• /
• 2007

This study was conducted to analyze recognition, applicability, class satisfaction, and needs as well as students' attitudes for eating behavior by 1st and 3rd graders of a mixed middle school located in Gyeonggi area in relation to food and nutrition section of the Technology and Home Economics curriculum and thereby provide basic data for development of strategies of educational effect maximization of food and nutrition in the curriculum. 522 questionnaire were collected and statistically processed. Findings from this study are as follows. Both 1st and 3rd graders were found to exhibit relatively low preference for technology and home economics curriculum. While 1st graders were more interested in the subject than 3rd graders, the frequency of practical use of the food and nutrition section in every day life was higher in 3rd graders than that in 1st graders. For food and nutrition section of the subject, preference level of the 1st graders was higher than 3rd graders. The 1st graders were higher than 3rd graders in the needs for food and nutrition section as well as in usefulness in every day life of the unit. The applicability in every day life of the unit was found to be generally higher, with 1st graders having a higher level of applicability than 3rd graders (p<0.001). Class satisfaction of the unit was higher in 1st graders than 3rd graders, with the most satisfactory unit being 'basics and practice of cooking' both for 1st and 3rd graders. Needs for food and nutrition unit were higher in 1st graders than 3rd graders, with the unit highly needed being 'basics and practice of cooking' both for 1st and 3rd graders. Regarding interrelation of the degree of preference, need, applicability and class satisfaction, as the preference was high on food and nutrition, the degree of need, applicability, and class satisfaction was high. As respondents recognized food nutrition section necessary, they were more satisfied and showed high applicability for the section. Therefore, contents of food and nutrition section should be improved with re-organization of educational and subject contents so that they will be best fit for students by grade, to increase preference, applicability and necessity in every life. In addition, to maximize the applicability of the subject in everyday life, sufficient class-time should be assigned for the purpose of experiment- and practice-based education, and a wide range of teaching strategies are needed to increase students' interest in the subject.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.199-208
• /
• 2005

This study analysis if the concepts of kitsch and vernacular remains as cultural elements for product design. Because their function and aesthetic value have vivid possibilities for general product design fields. For the purpose, this study limits its range within post modernism, kitsch, and vernacular, and analyzes their relationships. Against functionalism, post modernism had cultural pluralisms to approach into popular styles, and some of them was amusing design. That post modernism designs stimulated human beings' emotion by decorations or some symbolic forms from specific objects is similar to the symbolism, regionalism, or pluralism of kitsch or vernacular. Kitsch is a free style that is not limited in any specific trends. It is a Meta culture that has influenced into various fields including design, so kitsch does not have a parallel position with a product or design. In product design, kitsch is the behavior and result of imitating existing objects' images. It could have amusement according to which objects are imitated. So if human beings feel amusement by kitsch, it could be same as the direction of post modernism. Kitsch is determined by design atmospheres. They cannot be specified abjectly, and can be different according to people. With symbolism and regionalism, kitsch and vernacular appeared according to people's needs. While kitsch is consumer's tastes-oriented, vernacular is cultural tradition-oriented. Kitsch has symbolism that specifies products' functions or design concepts, and it is a communication method between human being and products. Because vernacular is province-oriented, it has a lot of styles according to regional living environments and cultural differences. So vernacular design reflects continued traditional lifestyles. By restorative memory, regionalism, cultural pluralism, amusement, and symbolism, kitsch and vernacular could be understood the sub or parallel concepts of post modernism. They might be easily miss-understood mixed concepts that have western and national characters. But in kitsch and vernacular concept, modernizing pas by using the pluralism of post modernism should be considered positive. So, the range of the further study is also supposed to be focused on more widened fields to, to establish cultural identification in design.

• Korean Journal of Remote Sensing
• /
• v.17 no.1
• /
• pp.1-14
• /
• 2001

The enhancement of the refractive index structure parameter $C_n^2$ often occurs where vertical gradients of virtual potential temperature ${\theta}_v$ and mixing ratio q have their maximum values. The $C_n^2$ can be a very useful parameter for estimating the convective boundary layer(CBL) height. The behavior of $C_n^2$ peaks, often used to locate the height of mixed layer, was investigated in the present study. In addition, a new method to determine the CBL height objectively using both $C_n^2$ and vertical air velocity variance ${\sigma}_w$ data of UHF radar was also suggested. The present analysis showed that the $C_n^2$ peaks in the backscatter intensity profiles often occurred not only at the top of the CBL but also at the top of a residual layer or at a cloud layer. The $C_n^2$ peaks corresponding to the CBL heights were slightly lower than the CBL heights derived from rawinsonde sounding data when vertical mixing owing to weak solar heating was not significant and the height of strong vertical ${\theta}_v$ gradients were not consistent with that of strong vertical q gradients. However, the $C_n^2$ peaks corresponding to the CBL heights were in good agreement with the rawinsonde-estimated CBL hegiths when vertical mixing owing to solar heating was significant and the vertical gradient of both ${\theta}_v$ and q in the entrainment zone was very strong. The maximum backscatter intensity method, which determines the height of $C_n^2$ peak as the CBL height, correctly estimated the CBL height when the $C_n^2$ profile had single peak, but this method erroneously estimated the CBL height when there was a residual layer or a cloud layer over the top of the CBL. The new method distinguished when there the CBL height from the peak due a cloud layer or a residual layer using both $C_n^2$ and ${\sigma}_w$ data, and correctly estimated the CBL height. As for estimation of diurnal variation of the CBL height, the new method backscatter intensity method even if the vertical profile of backscatter intensity had two peaks from the CBL height and a residual layer or a cloud layer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.60-70
• /
• 2019

Today, Deoksugung Doldam-gil, which is a well-known area in Seoul, has become a mixed place as many places reaching a critical age have been converted into parks. However, the previous research on the Deoksugung Doldam-gil was deficient in that the user, an essential variable, was not considered when assessing the place. Based on that, this study aims to analyze and interpret the perception of the places in Deoksugung Doldam-gil and to analyze factors to further enrich the place to visitors. According to the research, the representative idea of Deoksugung Doldam-gil is "the distance you want to go" and that has influencing factors, such as vehicle restrictions and the improvement of the walking environment. The analysis of classifying the variables that make up the perception of the place, physical environments, activities and meanings showed high awareness in, "streets of green (3.95)" and "stone walls of curves (3.88)." In the category of activities, "walking activities in the inner city (4.01)" and "love and romance (3.57)" were high. These results seem to reflect the spatial characteristics of the streets and the familiar image of the place were important. Five factors were extracted from the factor analysis to provide a more detailed understanding of the place perception, the correlation between each factor, and the place atmosphere of Deoksugung Doldam-gil. These factors confirmed a high correlation between 'green landscape' and 'historicity.' This can be attributed to the fact that the analysis reflects vital space, visual experience, and free walking conditions to be important, and these variables are present in urban parks. It also indicates the long-accumulated image and behavior near the site of Deoksugung Palace, including the historical and cultural heritage. It was confirmed that the factors related to the cognitive perception of Deoksugung Doldam-gil and the formation of the atmosphere of the place were strongly recognized. It found that there was a need to reflect the value and importance of 'green' in the future as culture or in the use of preservation and management related to heritage. This study presented a direction to be noted from the perspective of a user's place awareness, but considered only a fraction of the variables that affect the multidimensional sense of place and location recognition, and thus must be supplemented in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.278-283
• /
• 2019

3 kinds of fine powder, Fe-2%Ni alloy powder(N Ltd.) and Fe+2%Ni mixed powder(B Ltd. and S Ltd.), were fabricated into sintered compacts of bending strength specimens and ring type specimens by metal injection molding, debinding and controlling sintering conditions (reduction and sintering atmospheres, sintering temperature, sintering time and cooling rates). Density and magnetic properties of the sintered compacts were evaluated with the following conclusions. (1) When each compact was hold at 1123K for 3.6ks in H2 and sintered at 1623K for 14.4ks in Ar, the density of N, B and S Ltd.'s sintered compacts were measured as 96, 99 and 99%, and oxygen/carbon contents were measured as 0.0041%O/0.0006%C, 0.0027%O/0.0022%C, and 0.160%O/0.0026%C, respectively. (2) Magnetic characteristics of B Ltd. compact in Ar with the best results showed $B_{25}=14.3KG$, $B_r=7.75KG$, and $H_c=2.1Oe$, but not enough as those made by melting process. (3) Magnetic properties of B Ltd. compact which were sintered at 1673K for 14.4ks in Ar gas, and cooled at $0.83Ks^{-1}$ to 1123K and then cooled at $0.083Ks^{-1}$ down to room temperature were measured as $B_{25}=14.8KG$, $B_r=8.3KG$, and $H_c=1.3Oe$, almost similar to those made by melting process. Objected soft magnetic materials properties were obtained through sintering process by controlling sintering conditions (reduction condition, sintering atmosphere, sintering temperature and sintering time) and cooling rates.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.587-609
• /
• 2019

Short-and long-term stabilities of bentonite, favored material as buffer in geological repositories for high-level waste were reviewed in this paper in addition to alternative design concepts of buffer to mitigate the thermal load from decay heat of SF (Spent Fuel) and further increase the disposal efficiency. It is generally reported that the irreversible changes in structure, hydraulic behavior, and swelling capacity are produced due to temperature increase and vapor flow between $150{\sim}250^{\circ}C$. Provided that the maximum temperature of bentonite is less than $150^{\circ}C$, however, the effects of temperature on the material, structural, and mineralogical stability seems to be minor. The maximum temperature in disposal system will constrain and determine the amount of waste to be disposed per unit area and be regarded as an important design parameter influencing the availability of disposal site. Thus, it is necessary to identify the effects of high temperature on the performance of buffer and allow for the thermal constraint greater than $100^{\circ}C$. In addition, the development of high-performance EBS (Engineered Barrier System) such as composite bentonite buffer mixed with graphite or silica and multi-layered buffer (i.e., highly thermal-conductive layer or insulating layer) should be taken into account to enhance the disposal efficiency in parallel with the development of multilayer repository. This will contribute to increase of reliability and securing the acceptance of the people with regard to a high-level waste disposal.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.6
• /
• pp.17-26
• /
• 2021

Ground investigation and result analysis generally used to examine all sorts of structures' subsidence or stability can be classified into sandy soil and cohesive soil, and analysis on the liquid limit of soil is utilized to evaluate the physical properties of ground and types or technical behavior of soil. The most widely used method to analyze liquid limit is Casagrande with which liquid limit can be calculated relatively easily; however, it is fairly difficult to apply it to soil equipped with intermediate properties. Therefore, concerning the properties of soil having the intermediate properties of sedimentary ground, this researcher mixed the clay from Yangsan, Gwangyang, and Busan with sandy soil to make intermediate soil and then carried out the test of consistency limit and also evaluated applicability by using the suggested formula of consistency revision. The sample of intermediate soil was the mixture of clay and sandy soil, and to produce intermediate soil, the content (F_c) of fine soil was applied as 50%, 75%, or 100%. Regarding the physical properties of intermediate soil, to maintain the properties of clay in the natural state, bentonite was added at a fixed rate for controlling the properties of clay, and then, consistency was analyzed. By adopting the formula of consistency revision suggested in advanced research, this author analyzed consistency based on the experiment and consistency based on the suggested formula of revision. Also, about intermediate soil collected at the site, consistency based on the experiment and consistency based on the suggested formula of revision were analyzed comparatively, and about intermediate soil collected, this researcher analyzed particle size and calculated the content (F_c) of fine soil to analyze intermediate soil in diverse conditions. Moreover, about intermediate soil collected at the site, the suggested formula of consistency revision was applied to calculate the compression index, and the compression index based on the experiment and the compression index based on the suggested formula were analyzed comparatively to evaluate the applicability of the suggested formula.