• Elastomers and Composites
• /
• 제44권2호
• /
• pp.143-149
• /
• 2009

본 연구에서는 아스팔트가 가지는 단점을 보완하고자 아스팔트를 비이온 계면활성제(Span 80, Span 60, Tween 80, 및 Tween 60), 음이온 계면활성제(SLS), 및 양이온 계면활성제(Imidazole)를 변량 배합하여 반전유화법으로 아스팔트 에멀젼을 제조하였다. 유화아스팔트의 안정성을 규명하고자 입자크기, 점도, 제타전위, 및 내수성을 고찰하였다. 비이온 계면활성제와 음이온 계면활성제를 혼합 사용할 경우 유화아스팔트의 안정성은 우수하였으며 계면활성제의 양이 증가함에 따라 입자크기는 감소하였고, 반면에 점도와 제타전위 및 내수성은 증가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.932-937
• /
• 2008

The asphalt waste has been collected more than ten thousands' ton from repairing works on the road and excavation repair works, most of them are disposed on land of reclamation. Only a few percentage of wasted asphalt recycled to new one. Therefore, In this study, usage of wasted asphalt and has been done engineered characteristic test for recycling materials of sub-grade and structure. To know the characteristic of asphalt waste, tamping test, bearing-ratio test, permeability test and direct shear test was done using asphalt-sand mixture. The test results shows that, mixed asphalt materials with sand can be used for materials of subgrade-soil and structure.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.265-273
• /
• 2015

In this work, the emulsified asphalt with high phase stability and storage stability was prepared by using phase inversion emulsification and the surfactant mixed with cationic and nonionic surfactants. It was found that the asphalt together with Span 20, nonionic surfactant and DDA (Dimethyl Dodecyl Amine), cationic surfactant showed the most stable phase. The phase stability of the emulsified asphalt, therefore, was investigated through the particle size with mixed surfactant content, rheology behavior and Zeta potential value; the particle size decreased with the increase of the mixed surfactant content but the viscosity increased. The shear thinning behaviors and the Zeta potential value with 50 mV~60 mV were shown, which was found to be considered stable. In addition, SBR latex(Styrene-butadiene-rubber) and water dispersed Epoxy (EPD) were used to enhance the physical properties of the emulsified asphalt. The swelling and adhesion features of the emulsified asphalt were also studied with $CaCO_3$, Silica, and Montmorillonite (MMT). It was shown that the addition of SBR latex and MMT can be another way to improve the physical properties of the emulsified asphalt in that the lowest swelling feature was found.

• 한국방재학회 논문집
• /
• 제3권1호
• /
• pp.133-140
• /
• 2003

본 연구에서는 회수아스팔트 혼합물의 재활용을 위해서 상온재생 아스팔트 혼합물과 재래식 밀입도 13mm 아스팔트 혼합물을 사용하여 아스팔트 혼합물의 실험적 공용특성을 파악하기 위하여 간접인장강도 시험과 피로파괴 시험을 수행하였다. 간접인장강도 시험은 $10^{\circ}C,\;20^{\circ}C$에서 수행되었으며, 피로파괴시험은 500kgf, 400kgf 그리고 300kgf의 반복하중 아래에서 수행되었다. 간접인장강도 시험결과 재생 아스팔트 혼합물은 재래식 아스팔트 혼합물에 대해서 각 온도대별 약 90%의 성능을 보였으며, 피로파괴 시험의 결과에 의하면 재생 밀입도 아스팔트 혼합물은 반복하중 500kgf, 400kgf, 및 300kgf에 대해서 각각 재래식 아스팔트 혼합물의 70%, 55%, 30%의 성능을 보여주었다.

• 한국건축시공학회지
• /
• 제24권4호
• /
• pp.403-411
• /
• 2024

본 연구에서는 폐아스콘 순환골재의 용도확대를 위한 연구로서 물-시멘트 비 및 시멘트량에 따른 폐아스콘 순환골재를 활용한 레드머드 혼입 건식 흙콘크리트의 강도발현 특성을 부순골재와 비교 검토하고자 하였다. 그 결과, 폐아스콘 순환골재를 활용한 건식 흙콘크리트는 부순골재를 사용한 흙콘크리트와 비교하여 압축강도는 상대적으로 낮았고, 시멘트량에 대한 영향은 큰 것으로 나타났다. 폐아스콘 순환골재를 활용한 레드머드 혼입 건식 흙콘크리트는 시멘트량 250kg/m³ 이상의 배합에서 흙콘크리트 단체표준규격 중 가장 높은 성능인 주차장용 압축강도 18.0MPa 이상을 만족하는 것으로 나타났다.

• 한국도로학회논문집
• /
• 제19권4호
• /
• pp.37-44
• /
• 2017

PURPOSES : Conductive and convective heat transfer simulations for an asphalt mixture were made by using discrete element method (DEM) and similarity principle. METHODS : In this research, virtual specimens composed of discrete element method particles were generated according to four different predetermined particle size distribution curves. Temperature variations of the four different particles for a given condition were estimated and were compared with measurements and analytical solutions. RESULTS : The virtual specimen with mixed particles and with the smallest particle show very good agreement with laboratory test results and analytical solutions. As particle size decreases, better heat transfer simulation can be performed due to smaller void ratio and more contact points and areas. In addition, by utilizing the similarity principle of thermal properties and corresponding time unit, analytical time can be drastically reduced. CONCLUSIONS : It is concluded that the DEM asphalt mixture specimens with similarity principle could be used to predict the temperature variation for a given condition. It is observed that the void ratio has critical effect on prediction of temperature variation. Comparing the prediction for a 4 mm particle specimen with a mixed particle specimen, it is also concluded that predicting the mixed particle specimen temperature is much more efficient considering the number of particles that are directly associated with computational time in DEM analysis.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.215-221
• /
• 2022

In this study, high-penetration asphalt with low greenhouse gas emissions was used in the asphalt mixing process to reduce the carbon emissions during the reaction due to its capacity to be produced even at low temperatures. In effect, cationic, anionic, and non-ionic dispersants were added and mixed in different feeding ratios, seeking an effective dispersion of the modifiers (SIS, PS, TPEE, and SEBS) into the high-penetration asphalt matrix and forming an asphalt binder with a melting point of 120 ℃. The compatibility of the modifiers and the high-penetration asphalt was examined using SEM and DSC techniques, and the role of NDP-1 as a dispersant was carefully investigated with respect to dissolution time. The analyses showed that: (1) the dispersibility of the asphalt binder is good when the non-ionic dispersant is used; (2) as the concentration of the non-ionic dispersant increases, the dissolution time decreases and the domain size contracts; (3) the ND70-PS has the shortest dissolution time, the lowest agglomeration rate, and a single Tg value.

• International Journal of Contents
• /
• 제6권4호
• /
• pp.39-42
• /
• 2010

In this paper we developed density measurement equipment for Asphalt Pavement based on the electromagnetic capacitance. This kind of Non-Nuclear Density Gauges technology and products is used or studied in USA, Finland, Sweden as standardization of authorized method for pavement density measurement. Effective permitivity of pavement asphalt is characterized in electromagnetic capacitance by the asphalt material, mixed ratio, and harden grade of pavement asphalt. We can get a density value of asphalt by replacing value of electromagnetic capacitance with standard density value and characteristic transformation curve. We are conformed that measurement data according to temperature, humidity, and real field asphalt of our density measurement equipment can be a precise value.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.338-340
• /
• 2009

The asphalt pavement is usually non-uniform since achieving a non-segregated and homogeneous asphalt mixture is very difficult. The segregation can occur in the mixed material before it is fed onto the road and it become segregated as it is being placed onto the road surface. Note that this segregation determines the performance of the asphalt pavement. Hence, it is necessary to check the segregation by estimating the density of the asphalt pavement in the field. In this paper, a research on estimating the density of the asphalt mixture by measuring the dielectric constant of the material is conducted. An RF transceiver and an antenna are designed and tested to a series of asphalt density samples, and discussions are shown.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.97-105
• /
• 2018

PURPOSES : Asphalt concrete pavement is damaged by various causes such as traffic and environmental loads. The distressed pavement should be maintained by various methods to provide a comfortable and safe pavement for the driver. This study evaluates the effect of adding a mixing procedure to enhance the mixture quality in the hot in-placement recycled asphalt pavement method, which is an asphalt-pavement maintenance method. METHODS : Various test methods such as Marshall stability and dynamic stability, were employed to estimate the recycled asphalt mixture with and without an additional mixing, using the hot in-placement recycled asphalt pavement method. RESULTS : The mixture samples used in this study were taken before and after the addition of the mixer in the hot in-placement recycled asphalt pavement method (HIR) at field construction sites in GongJu and JinJu in South Korea. The test results of both mixtures satisfied the asphalt-mixture standard specifications. CONCLUSIONS : This study confirmed that adding a mixer in the HIR method results in a well-mixed new asphalt mixture, rejuvenator, and reclaimed asphalt mixture.