Browse > Article
http://dx.doi.org/10.7855/IJHE.2017.19.4.037

Heat Transfer Analysis of Cylindrical Asphalt Specimen using DEM  

Yun, Taeyoung (Highway Research Division, Korea Institute of Construction Technology)
Publication Information
International Journal of Highway Engineering / v.19, no.4, 2017 , pp. 37-44 More about this Journal
Abstract
PURPOSES : Conductive and convective heat transfer simulations for an asphalt mixture were made by using discrete element method (DEM) and similarity principle. METHODS : In this research, virtual specimens composed of discrete element method particles were generated according to four different predetermined particle size distribution curves. Temperature variations of the four different particles for a given condition were estimated and were compared with measurements and analytical solutions. RESULTS : The virtual specimen with mixed particles and with the smallest particle show very good agreement with laboratory test results and analytical solutions. As particle size decreases, better heat transfer simulation can be performed due to smaller void ratio and more contact points and areas. In addition, by utilizing the similarity principle of thermal properties and corresponding time unit, analytical time can be drastically reduced. CONCLUSIONS : It is concluded that the DEM asphalt mixture specimens with similarity principle could be used to predict the temperature variation for a given condition. It is observed that the void ratio has critical effect on prediction of temperature variation. Comparing the prediction for a 4 mm particle specimen with a mixed particle specimen, it is also concluded that predicting the mixed particle specimen temperature is much more efficient considering the number of particles that are directly associated with computational time in DEM analysis.
Keywords
heat transfer; DEM; similarity principle; asphalt mixture; analytical solution;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Buttlar, WG, and You, Z. 2001. Discrete element modeling of asphalt concrete: Microfabric approach. Transportation Research Record. 1757, Transportation Research Board, National Research Council, Washington, D.C., pp.111-118.
2 Chadbourn BA, Luoma JA, Vewcomb DE, Voller VR. 1996, Consideration of hot-mix asphalt thermal properties during compaction, american society of testing and materials, STP 1299. pp.127-141.
3 Chang GK, Meegoda NJ. 1993, Simulation of the behavior of asphalt concrete using discrete element method, Proc.,, 2nd Int. conf. on Discrete Element Method, pp.437-448.
4 Chen, J, Huang, B, Chen, F, Shu, X. 2012. Application of discrete element method to Superapave gyratory compaction. Road materials and pavement design. Vol.13, No.3, pp.480-500.   DOI
5 Collope, AC, McDowell GR, Lee Y, 2004. Use of the distinct element method to model the deformation behavior of an idealized asphalt mixture, International Journal of Pavement Engineering, Vol.5, Issue 1, pp.1-7.   DOI
6 Liu, Q, Cao, D, 2009. Research on material composition and performance of porous asphalt pavement", Journal of materials in civil engineering, Vol.21, No.4, pp.135-140.   DOI
7 Ormel, TJ, 2012. Modeling asphalt with discrete and continuum methods University of Twente.
8 Roussel, N, Leroy, SR, 2005. From mini-cone test to abrams cone test: measurement of cement-based materials yield stress using slump tests, cement and concretes research, Vol.35, pp.817-822.   DOI
9 Yun T, Park, HM, 2016. Feasibility study on similarity principle in discrete element method, International journal of highway engineering, Vol.18, No.2, pp.51-60.   DOI
10 Yun, T, Yoo, PJ, 2014. Application and verification of thermodynamics by using cylinrical asphalt mixture specimen, International journal of highway engineering, Vol.16, Nu. 4, pp.87-95.   DOI
11 Chaudhuri, B, Mehrotra, A, Muzzio, FJ, Tomassone, MS, 2006. Cohesive effects in powder mixing in a tumbling blender. Powder technology. Vol.165, pp.105-114.   DOI
12 Abbas, A, Masad, E, Papagiannakis, T, Harman, T, 2007. Micromechanical modeling of the viscoelastic behavior of asphalt mixture using the discrete-element method", International journal of geomechanics, Vol.7, No.2, pp.131-139.   DOI