• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.95-96
• /
• 2012

This study makes with the environment-friendly artificial stone which doesn't use the cement and natural aggregate and increases the blast furnace slag that is the eco-friendly material that is the industrial byproduct, fly ash, and availability of the red mud and applies the coares aggregate substitute material as the cleistothecium. The experimental plan according to it indicated the compressive strength and flexural strength which is the most excellent in the mixied ratio 40% of the result degree of closeness magnetism of experimenting with the optimal mix obtained through the preceding stude.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.93-98
• /
• 1991

The damages due to alkali-aggragate reaction between the reactive silica constituents of the aggregate and the alkalies in cement have been frequently reported since 1923 in America. Recently, alkali-aggregate reaction, especially alkali-silica reaction, can be found all over the area using crushed stones. This research was performed to indentify the alkali-silica reactivity of 18 sets of crushed stones being used currently in domestic reacy-mixed concrete plant as coarse aggregates by petrollogical, chemical and mortar bar method. It is found that all the aggregates used in this study are innocuous at alkali-silica reaction. Further study will be carried out with some aggregates in more severe conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.123-124
• /
• 2008

We investigate characteristics of J-aggregation as take advantage of LB technic. In order to confirm the applications possible for the molecular electronic device, the morphological properties of merocyanine dye were investigated by AFM. $\pi$-A curves investigated the surface pressure of the LB film from a liquid to a solid state ranged between 90 and 100 mN/m. We observed aggregation and it's characteristics by using visible reflection spectroscopy. This paper focuses on results obtained in mercocyanide dye. When LB films of merocyanine dye are mixed with arachidic acid, J-aggregate formation is exhibited. J-aggregate formation has been serving as typical systems in revealing the physical and structural aspects of nano-sized molecular aggregates constructed as muiltilayers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.165-166
• /
• 2008

We investigate characteristics of J-aggregation as take advantage of LB technic. In order to confirm the applications possible for the molecular electronic device, the morphological properties of merocyanine dye were investigated by AFM. $\pi$-A curves investigated the surface pressure of the LB film from a liquid to a solid state ranged between 90 and 100 mN/m. We observed aggregation and it's characteristics by using visible reflection spectroscopy. We have observed morphology of merocyanine dye on gold surface by STM. focuses on results obtained in mercocyanide dye of J-aggregation. When LB films of merocyanine dye are mixed with arachidic acid, J-aggregate formation is exhibited. J-aggregate formation has been serving as typical systems in revealing the physical and structural aspects of nano-sized molecular aggregates constructed as muiltilayers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.33-36
• /
• 1998

Generally, the base concrete for manufacturing the flowing concrete has to increase the fine aggregate content or adjust the fines content prevent the concrete from segeration, However, it may not only increase the cost, but cause the inconvenience in production of base concrete. In this paper, the experiments is performed on the superplasticizer which is used for base concrete by mixing viscosity agents and AE admixtures. According to the results, it shows that it is possible to manufacture a flowing, non segregation, high durability and economical concrete in the field without increasing the fine aggregate content of base concrete, when the superplasticizer are mixed with viscosity agents and AE admixtures in an appropriate proportion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.1017-1022
• /
• 2003

The hydraulic structures such as aqueduct tunnels and the drainage canal of the hydroelectric power plant in Japan are almost old. Therefore, the concrete surface of the aqueduct tunnel has received damage by wear-out and the crack, etc. This study was to develop repair mortar mixed a coal ash coarse powder by using two kinds of high early strength cements. As a result, the repair mortar was obtained by substituting the EF cement (maid in Japan) and the MT cement (maid in South Korea) at a rate of 60:40, and substituting the coal ash 30% and the mixing rate 35% of the artificial aggregate for natural fine aggregate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1127-1132
• /
• 2000

The purpose of this study is to investigate the utilization of recycled fine aggregates as a material to apply to concrete curbs. This study also intends to improve the quality of recycling aggregates by adding an excellent polyester resin for the improvement of durability, anti-corrosiveness, and strength. The experimental mixing proportion was planned to acquire optimum workability and filling capability of resin mortar mixed with the recycled fine aggregate. The curbs products made for test have four type cross sections. Their flexible fracture load is 1,918~6,883kgf and their weight is 15.31~31.61kg.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.76-77
• /
• 2021

compared and reviewed the water repellency and strength characteristics by controlling the surface stamping size and fine aggregate ratio of cement mortar mixed with water repellent as a method to control the ecological imitation surface structure. As a result of measuring the contact angle, the higher the ratio of fine aggregate, the larger the contact angle. The contact angle increased when the surface structure was changed by stamping, and increased as the stamping size became smaller. In the surface stamping of mesh#150, the contact angle was particularly increased.

• 한국건축시공학회지
• /
• 제20권4호
• /
• pp.331-338
• /
• 2020

본 연구는 CGS를 콘크리트용 혼합골재로서 활용성을 검토하기 위하여 양호한 입도분포의 부순잔골재(CSa) 및 미립자인 해사와 굵은 입자의 부순잔골재를 혼합한 혼합골재(MS)에 CGS의 치환율 변화에 따른 콘크리트의 기초적 특성 및 내구성을 분석하였다. 실험결과, 슬럼프 및 슬럼프 플로는 CSa 및 MS 모두 CGS 치환율이 증가할수록 증가하였으며, 공기량은 반대로 감소하였다. 압축강도는 CSa를 사용한 경우 CGS 치환율이 증가할수록 저하하였지만, MS를 사용한 경우는 CGS 50 %에서 최대치를 나타내었다. 콘크리트 내구성을 검토한 결과로, 건조수축 및 탄산화 깊이측정의 경우는 CGS 치환율에 따라 양호한 성능을 나타내었다. 하지만, 내동해성에서는 전반적으로 CGS 치환율이 증가할수록 감소하는 것으로 나타났다. 따라서, CGS를 치환 사용하는 혼합잔골재 콘크리트의 경우는 공기량 감소를 보완할 수 있도록 AE제 추가 투입 등의 대책을 수립한다면, 큰 문제 없을 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.613-620
• /
• 2005

순환골재를 구조체용 콘크리트에 이용하는 것은 품질관리 및 내구성에 대한 논란으로 활성화가 현실적으로 어려운 실정이다. 이 경우 상대적으로 요구되는 품질 수준이 낮은 콘크리트 2차 제품에 순환골재를 활용하는 것이 유력한 대안이 될 수 있지만 증기 양생시 순환골재 콘크리트의 특성에 대한 연구성과는 거의 없는 실정이다. 이에 본 연구에서는 순환골재의 콘크리트 2차 제품 적용성을 검토하기 위하여, 다양한 순환 굵은골재 및 순환 잔골재 치환율에 따라 증기양생 및 수중양생을 통하여 제작된 콘크리트의 압축강도, 휨강도, 쪼갬인장강도, 부착강도 실험을 실시하였다. 강도 실험결과 순환 굵은골재의 치환율이 증가함에 따라 강도가 약간 감소하는 결과를 보이고 있으며, 순환 잔골재를 $100\%$ 치환한 경우에는 증기양생 콘크리트의 강도특성 저하가 뚜렷이 나타났다. 순환 굵은골재의 치환율이 $50\%$인 경우에는 압축강도, 휨강도, 부착강도가 보통 콘크리트와 거의 같게 나타나 일반 콘크리트와 동일하게 적용할 수 있을 것으로 판단된다. 순환골재와 고로슬래그 시멘트를 사용한 증기양생 콘크리트의 경우 증기양생 후 7일 시점에서 증기양생 보통포틀랜드 시멘트 콘크리트에 비해 강도가 낮게 나타났다. 양생방법에 따른 순환골재 콘크리트의 역학적인 차이는 일반 콘크리트와 유사하게 나타나 실제 2차제품의 생산에 순환골재 적용이 가능한 것으로 나타났지만 최적의 치환율을 결정하기 위해서는 추가적인 연구가 필요한 것으로 판단된다.