• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.549-554
• /
• 2002

In Powder System, SCC demands high dosage of superplasticizer and a lage amout of powder for suitable fluidity and viscosity. Okamura's method of most representative mixing design method in SCC of Powder-System is unfavorable economically because of using a large amount of powder. In addition, many ready-mixed concrete plants do not use his mix design method and procedure due to complexity for practical application. Therefore, Nan Su proposed more simple mix design method than Okamura's. It had an advantage in simplicity in practical application and required a smaller amount of powders compared with Okamura's method. This paper proposed an optimal mixture proportion of SCC with consideration of Nan Su's method. The new and modified mix design method required a smaller amount of powder than that of Nan Su's. To check the properties of SCC, considered with the requirements specified by the Japanese Society of Civil Engineering.(JSCE)

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.73-78
• /
• 2002

This study examines self-compacting of concrete using Ground Calcium Carbonate(GCC) gathering in limestone mine of Banyans district in order to make self-compacting concrete in the range of design strength 300kgf/cm$^2$ and the optimal mix proportion of self-compacting concrete that can use in field structure. The result shows that the optimal GCC replacement ratio is 45$\pm$5% in the normal strength of design strength 300kgf/cm$^2$ and that the volume ratio of the optimal fine aggregate used as the way satisfying both viscosity and compacting ability without separating materials is 46%. The optimal volume ratio of the coarse aggregate considering the economical aspect of concrete is 50%. It is desirable that the optimal mix proportion satisfying self-compacting for replacement of GCC is decided through mix design according to each replacement ratio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.103-110
• /
• 1997

The objective of this study is to provide the information on the small-scale model mix proportion when the behavior of prototype concrete pavement is studied through small-scale model experiments. However it is difficult to obtain a model material to simulate the prototype concrete by scaling the individual components according to the laws of similitude. In this paper, the stress-strain behavior in uniaxial compression is used as a means to correlate materials similitude between the prototype and the model concrete. Based on th results of experiments, We compared the stress-strain curves of prototype and model concrete mixes using a nondimensional basis. In order to simulate the stress-strain curves of prototype concrete, it is important that various mix as of model concrete selected properly which are varied from aggregate grading, cement-aggregate and sand-aggregate ratio.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.49-52
• /
• 2003

The objective of this study the mechanical characteristics of prefoamed lightweight foamed concrete using the mineral foam agent which has high lightness, and strength. The compressive strength of lightweight foamed concrete using mineral foam agent are about 2 times degree high those the of lightweight foamed concrete using vegetable foam agent. Lightweight foamed concrete was able to obtain the result of 50kg/㎠ or more compressive strength, when was unit weight 0.8t/㎡. In the case of the same unit weight of concrete, it is influenced by w/c of foam agent ratio. The paper present extensive data on characteristics of compressive strength of the concrete manufatured with the different factors in mix design and also present optimum mix proportion.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.49.1-52
• /
• 2003

The objective of this study the mechanical characteristics of preformed lightweight foamed concrete using the mineral foam agent which has high lightness, and strength. The compressive strength of lightweight foamed concrete using mineral foam agent are about 2 times degree high those the of lightweight foamed concrete using vegetable foam agent. Lightweight foamed concrete was able to obtain the result of 50kg/$\textrm{m}^3$ or more compressive strength, when was unit weight 0.8t/$\textrm{m}^3$. In the can of the same unit weight of concrete, it is influenced by w/c of loan agent ratio. The paper present extensive data on characteristics of compressive strength of the concrete manufactured with the different factors in mix design and also present optimum mix proportion.

• 콘크리트학회지
• /
• 제7권6호
• /
• pp.224-232
• /
• 1995

최근 일부 외국에서는 종래의 수중 콘크리트와 다른 관점으로부터 수중에서 쉽게 분리되지 않고 타설방법도 용이한 특수 혼화제가 개발되어 실험과 시공에서 성공하였고, 이런 특수 콘크리트(수중 비분리 콘크리트)는 점차 사용 규모와 시공 방법이 확대되고 있는 추세이다. 본 논문에서는 수중 비분리 콘크리트에 대한 성공적인 실험, 시공사례를 참고하여 수중 비분리성 혼화제 및 다른 혼화제의 첨가 방법을 달리하였을 경우, 수중 비분리 콘크리트의 물성변화를 검토하였고, 비교적 정온 상태의 해상 환경에 적용할 수 있는 수중 비분리 콘크리트의 최적 배합을 결정하였다.

• 한국농공학회논문집
• /
• 제49권2호
• /
• pp.37-46
• /
• 2007

The service life of agricultural concrete structures is designed in about 30 to 100 years, but actual service lift is estimated in an average 18 years. Therefore, as the service life of the agricultural concrete structures increases, necessity of repair by aging from various environment condition exposure increases. This study was to determinate the optimum mix proportion of latex modified repair mortar and to improve the durability performance of agricultural concrete structures. The physical and mechanical tests of latex modified repair mortar were performed. Tests of flow, compressive strength, flexural strength and bond strength tests were conducted. Test results show that the optimum nex proportion of latex modified repair mortar, when used in 5% latex volume fraction (weight of cement), 1.5% antifoaming agent (weight of latex), 0.2% PVA fiber volume fraction, 1:2 (binder-sand ratio), 10% silica fume replacement ratio (weight of cement), could result in best performance for the repair of agricultural concrete structures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.88-89
• /
• 2015

In cold weather, the speed of concrete strength development is slow. As a result, construction speed becomes slow and it is problem for all construction site to solve this. So in this study, to shorten removing frame time after placing concrete, mix proportion using early-strength-binder(ESB) and curing method such as using heat line in concrete was considered. At first, concrete mix proportion was examined at -5℃ temperature between ordinary portland cement(OPC) and ESB. And second step, concrete, using mix proportion with OPC, was examined according to curing method(: 1) heat line used and 2) no heat line) and kinds of form (: 1) Deck slab, 2) Half PC slab and 3) SOG slab). All cases are same condition: slab thickness is 1,500mm, double-bubble sheet is used as a curing sheet after placing concrete. After the test, OPC is enough to get strength compared to ESB in special condition and 48~60 hours is needed according to form condition.

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.179-187
• /
• 1996

최근 해양 개발의 추세에 따라 많은 수중콘크리트 구조물이 건설되고 있다. 이에 따라 일부 외국에서는 종래의 치기방법 개선 위주의 연구에서 벗어나 수중에서 쉽게 분리되지 않는 특수 혼화제의 개발에 성공함으로써 공기중에서 치는 콘크리트와 대등한 품질을 갖는 수중콘크리트의 실험과 시공에 성공하였지만 아직 국내에서는 연구실적이나 시공사례가 없다. 본 논문에서는 수중불분리 콘크리트에 대한 성공적인 실험, 시공사례를 참고로 실내 실험을 실시하여 수중불분리성 혼화제 및 다른 혼화제와의 상호작용으로 인한 수중불분리 콘크리트의 물성변화를 정량적으로 평가하였고, 정온 상태의 해상 환경에 적용할 수 있는 최적의 배합을 결정하였다.

• 콘크리트학회논문집
• /
• 제21권1호
• /
• pp.55-64
• /
• 2009

본 연구는 시멘트 종류에 따른 병용계 자기충전 콘크리트의 최적배합비를 도출하고, 최적배합비의 품질특성을 평가하여 현장시공의 자료로 제안하기 위한 것이다. 병용계 자기충전 콘크리트는 분체와 증점제를 함께 사용하기 때문에, 품질의 안정성을 확보할 수 있을 것으로 예측된다. 분체로써 점성 증대 및 수화열 저감에 우수한 석회석 미분말을 사용하였다. 석회석 미분말의 치환율은 시멘트 종류에 따른 구속수비 실험을 통해 정하였으며, 배합변수는 잔골재용적비 ($S_r$), 굵은골재 용적비 ($G_v$) 및 물-시멘트비 (W/C)로 하여, 최적배합비를 도출하였으며, 이에 대한 응결시간, 블리딩량, 침하량 및 수화열 특성을 분석하였다. 실험결과, 고로슬래그 시멘트의 경우에는 석회석 미분말의 치환율 13.5%, 잔골재 용적비 47%, 물-시멘트비 41%이며, 저열포틀랜드시멘트의 경우에는 석회석 미분말의 치환율 42.7%, 잔골재 용적비 43%, 물-시멘트비 51%이며, 굵은골재 용적비는 시멘트의 종류에 관계없이 53%로 나타났다. 최적배합비에 대한 응결시간, 블리딩, 침하량 및 수화열에 대한 실험 결과, 저열포틀랜드시멘트를 사용한 자기충전 콘크리트가 가장 안정적인 것으로 나타났으며, 설계기준강도 40.0 MPa (배합강도 51.5 MPa)를 만족하는 저열포틀랜드시멘트를 사용한 병용계 자기충전 콘크리트를 지하식 LNG 저장탱크의 지하연속벽용 콘크리트로 제안하였다.