• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.419-426
• /
• 2001

Concrete mix proportioning is a process of selecting the right combination of many materials such as cement, fine aggregates, coarse aggregates, water, and admixtures to make concrete satisfying for specification and cost. In determining proportioning of concrete mixes, code information, specification, and the experience of experts are needed. However, all factors regarding mix proportioning factor cannot be considered. Therefore, the final acceptance depends on concrete quality control test results. The proportioning of concrete mixes and the adjustments are somewhat complicated, time-consuming, and uncertain tasks. In this paper, as a tool to predict the factor of the proportioning of concrete mixes, an artificial neural network is used. To consider the varieties of material properties, the standard mixed table of two companies of ready mixed concrete are used. The results show that neural net works is successfully applied to the prediction of concrete mix proportioning factor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.113-118
• /
• 1995

The purpose of this study is to suggest concrete mix proportioning design using Blast-furnace slag cement. The mix conditions are specified by concrete strength(180~400kg/$\textrm{cm}^2$), slump$(15\pm2cm)$m and air volume$(4.5\pm1%)$. From the result of concrete mix proportioning design using Blast-furnace slag cement, unit water content can be reduced by 3~8% comparing with OPC. The relationship between strength at 28days and cement water ratio is as follow. when blast-furnace slag cement is used: $\sigma_{28}$=304.OC/W-296.8. Super-plasticizer have to be used to get a slump of 15cm when water/cement ratio is less than 45%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.189-194
• /
• 2000

The optimum mix proportioning of concrete is to produce a concrete which satisfies the strength, workability and durability required with minimum component of materials. However in practice the cement content of mix proportioning in construction field is normally higher then required. In this study, the existing mix proportioning of concrete currently used in Korea Highway Corporation has been reviewed by reducing 10kg of cement content by 3~5 strength in strength and workability during the first year of this project. The optimum mix design is established based on the results of the above review and durability were examined during the second year. The experimental results though 2 year show that 103~0% of the reduction of cement content still satisfies the specified strength of concrete and produces higher durability concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.215-220
• /
• 1994

본 연구의 목적은 당사 콘크리트 배합설계 프로그램인 쌍용배합설계시스템(Ssangyong Mix Proportioning Design System ; 이하 SMPD라 칭한다)을 기본으로해서 슬래그시멘트에 대한 콘크리트 배합설계(안)을 제안함으로써 콘크리트 현장에서 합리적으로 콘크리트를 제조할 수 있도록 하는데 있다. 연구 내용은 슬래그시멘트와 보통시멘트간의 콘크리트 물성차이를 실험실적으로 규명하기 위해서 슬래그 함유량 및 양생 온도별로 슬래그시멘트의 콘크리트 강도발현특성, 물시멘트비, 단위수량변화 및 응결특성 등을 검토하였으며 그 결과를 이용하여 슬래그시멘트의 콘크리트 배합설계를 시행, 표준배합과 현장배합표를 제시하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.140-145
• /
• 1991

Tests were conducted to get a mix proportioning of high strength concrete between σ28 and (C/W) using low quality materials easily purchased in situ. Superplasticizer was used as a chemical admixture to compensate low slump of base concrete keeping it up about 15±2㎝. General material properties such as modulus of elasticity, poisson's ratio, unit weight and stress-strain characteristic of high strength concrete were obtained. Test results show that mix proportioning of high strength concrete proposed in this paper have reasonable validity and these can be used as a design criteria in high strength concrete construction.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.2
• /
• pp.73-81
• /
• 1991

This work is a study on modeling of concrete mix proportioning Although concrete in one of the most important materials for construction, its production system is not so well organized in comparison with other materials. The heterogeneous nature of concrete and concrete materials create numerous variables which influence the properties of fresh and hardened concrete. The relationships between the different variables are formulated into equations. The regression analysis was done by using the computer program of statistical analysis for engineers. A computer program was written for proportioning the different ingredients of concrete using the derived equations.

• Cement Symposium
• /
• no.1
• /
• pp.56-63
• /
• 1973

In cement industry in which three or more raw materials are used, the proportioning of raw materials is an essential step. When the materials are proportioned, each should be as nearly homogeneous chemically and physically as conditions permit. Most of th

• Magazine of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.18-26
• /
• 2011

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.54-57
• /
• 1992

This report presents the survey findings on the proportioning of ready mixed, concrete mixtures. According to this report, the W/C ratio and S/A ratio, based upon the type 25-210-12, in mix proportion of ready mixed concrete are 53% and 45% respectively. The problems to be improved, coming out in this study, are (1)using the adequate quantity of cement (2) alternation of mix design cope with the change of kinds of aggregates (3)large standard error in the mix proportion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.363-368
• /
• 1997

In this study, permeable polymer concretes using unsaturated polyester (UP) resin with binder contents of 6, 7 and 8%, filler-binder ratios of 0, 0.5, 1.0%, and various sand and aggregate contents are prepared, and tested for compressive and flexural strengths, length change and water permeability. The effects of the mix proportioning factors on the strength properties, length change and coefficient of permeability of the permeable polymer concrete are discussed. From the test results, increase in the compressive strength and decrease in the coefficient of permeability of permeable polymer concrete are clearly observed with increasing filler-binder ratio. The permeable polymer concretes having a compressive strength of 9.4~28.3MPa and a coefficient of permeability of 0.12~1.93 cm/s can be produced in the consideration of the mix proportioning factors.