• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.493-498
• /
• 2004

The objective of the present study is to compare various conventional and recently evolved satellite image-processing techniques and to ascertain the best possible technique that can identify and position of aquaculture farms accurately in and around the Younggwang coastal area. Several conventional techniques performed to extract such information fiom the Landsat-TM imagery do not seem to yield better information about the aquaculture farms, and lead to misclassification. The large errors between the actual and extracted aquaculture farm information are due to existence of spectral confusion and inadequate spatial resolution of the sensor. This leads to possible occurrence of mixture pixels or 'mixels' of the source of errors in the classification techniques. Understanding the confusing and mixture pixel problems requires the development of efficient methods that can enable more reliable extraction of aquaculture farm information. Thus, the more recently evolved methods such as the step-by-step partial spectral end-member extraction and linear spectral unmixing methods are introduced. The farmer one assumes that an end-member, which is often referred to as 'spectrally pure signature' of a target feature, does not appear to be a spectrally pure form, but always mix with the other features at certain proportions. The assumption of the linear spectral unmxing is that the measured reflectance of a pixel is the linear sum of the reflectance of the mixture components that make up that pixel. The classification accuracy of the step-by-step partial end-member extraction improved significantly compared to that obtained from the traditional supervised classifiers. However, this method did not distinguish the aquaculture ponds and non-aquaculture ponds within the region of the aquaculture farming areas. In contrast, the linear spectral unmixing model produced a set of fraction images for the aquaculture, water and soil. Of these, the aquaculture fraction yields good estimates about the proportion of the aquaculture farm in each pixel. The acquired proportion was compared with the values of NDVI and both are positively correlated (R$^2$ =0.91), indicating the reliability of the sub-pixel classification.ixel classification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.637-645
• /
• 2017

Jeju Island is composed of irregular volcanic rock layers formed by several volcanic activities. Since structure such as the offshore wind turbine has to support considerably large over turning moment due to long distance from foundation to load point and relatively large horizontal load. Pile foundations are needed to economically support such structure even in the case of rock layer. Therefore, in this study, mechanical performances are estimated by mixing ratio of water, cement, and sand to figure out optimal mixing ration of filling material for pile penetrated to rocky layers, and outcomes of this study are compared and analyzed with results of other researches. In the same conditions, mechanical performances of the mortar (S/(S+C)=20~40%) are better than those of cement paste and soil cement. On the basis of major outcome of this study, appropriate range of mixing and a strengthening model are suggested.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.376-378
• /
• 2011

Hamburg is going with the HafenCity Project to create new urban space for city's bustling central district. HafenCity will add an additional 155 hectares to Hamburg's central urban area, increasing its total area by some 40 percent. The new developments in HafenCity will be oriented towards the River Elbe and the great seaport. Its centre will have a close relation to water. They will be used for the construction of a fascinating mix of residential accommodation, offices, cultural and leisure amenities, retail facilities and restaurants set in a framework of an elaborate urban layout. This study is focusing on the purpose of the project goals, the task of the Hamburg authorities and GHS (Gesells chaft f$\ddot{u}$r Hafen und Standortentwicklung) and an urban planning ideas competition (draft masterplan). Regarding of the new trend of the reurbanisation in Europe, the aim of this study will be to find out, in which way Hafencity is trying to develope the new city district as a model for the European inner city of the 21st century.

• STI Policy Review
• /
• v.3 no.2
• /
• pp.92-110
• /
• 2012

An active policy role is suggested for collaboration that will enhance national level Science and Technology (S&T) capabilities. In contrast, some studies see a limited role of policy support for collaborative S&T research at the individual level (including research groups or institutional levels) due to their self-organizing nature. Two views on S&T collaboration look at different levels but existing research largely ignores the context of developing countries. This paper shows how S&T collaborations between Brazil and Korea have developed over the past two decades. The paper indicates the gaps between initiation and the actual establishment of collaborative research at national and individual levels, differences in the focus areas of research, differences in resources and project planning, and the nature of collaborations. Collaborative research activities at the national level were initiated before the individual level but activated later than the individual level; in addition, the focus areas of research were laid down earlier at the national level with individual collaborations focused on different areas. Project types remained different at each level (i.e. top-down and bottom-up) or with a slightly changing mix. This study suggests appropriate policy measures (such as the timely and effective information collection of activities at different levels and proactive coordination) that could reduce the gaps in the timing and alignment of research areas. This paper also alludes to an evolutionary model to develop S&T collaboration among developing countries.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.164-171
• /
• 2015

Although coal-fired power generation has played a role as base load unit, it has incurred various social costs in the process of generating and providing electricity. It is necessary to extend the proportion of low-carbon power generations, and reduce the ratio of coal-fired power generation to cope with global climate changes. This study, therefore, attempts to estimate the public's willingness-to-pay (WTP) for substitution of supplied electricity from hydro-electricity generation, a representative renewable energy, for coal-fired power generation. To this end, we apply the contingent valuation (CV) method, widely used technique when valuing non-market goods, to elicit the public's WTP. In addition, a spike model is employed to consider zero WTPs. After the empirical analysis with 1,000 households CV survey data, the results show that mean household's WTP for replacing supplied electricity from hydro-electricity generation with coal-fired power generation is estimated to be about 54 KRW per kWh. The results of this study are expected to contribute to determining energy-mix and provide benefit information of hydro-electricity generation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.18-25
• /
• 2020

The unconfined compressive strength of lightweight treated soils strongly depends on mixing ratio. To characterize the relation between various LTS components and the unconfined compressive strength of LTS, extensive studies have been conducted, proposing normalized factor using regression models based on their experimental results. However, these results obtained from laboratory experiments do not expect consistent prediction accuracy due to complicated relation between materials and mix proportions. In this study, deep neural network model(Deep-LTS), which was based on experimental test results performed on various mixing conditions, was applied to predict the unconfined compressive strength. It was found that the unconfined compressive strength LTS at a given mixing ratio could be resonable estimated using proposed Deep-LTS.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.93-98
• /
• 2015

IoT (Internet of Things) is recently burgeoning as business applications as well as ICT itself. Among the business applications of IoT, wearable devices are recognized as a leading area of customer devices. This research first identifies customer needs of activity trackers (fitness trackers), as one of representative wearable devices, and mapping the identified needs with the well-known marketing model of marketing mix (4 P's: Product, Price, Promotion, and Place). Survey was applied to university students for identifying current and potential needs for activity trackers. The needs were classified by 4 P's, and according to the results, different from other IT devices, activity trackers has more potential needs. Moreover, reliable distribution channels, offline and company owned shops were preferred, rather than online shopping mall by third parties. The results would provide some valuable implications to not only designers of activity trackers but also business management.

• Health Policy and Management
• /
• v.25 no.3
• /
• pp.197-206
• /
• 2015

Background: The purpose of this study was to propose a method for developing a measure of hospital-wide all-cause risk-standardized readmissions using administrative claims data in Korea and to discuss further considerations in the refinement and implementation of the readmission measure. Methods: By adapting the methodology of the United States Center for Medicare & Medicaid Services for creating a 30-day readmission measure, we developed a 6-step approach for generating a comparable measure using Korean datasets. Using the 2010 Korean National Health Insurance (NHI) claims data as the development dataset, hierarchical regression models were fitted to calculate a hospital-wide all-cause risk-standardized readmission measure. Six regression models were fitted to calculate the readmission rates of six clinical condition groups, respectively and a single, weighted, overall readmission rate was calculated from the readmission rates of these subgroups. Lastly, the case mix differences among hospitals were risk-adjusted using patient-level comorbidity variables. The model was validated using the 2009 NHI claims data as the validation dataset. Results: The unadjusted, hospital-wide all-cause readmission rate was 13.37%, and the adjusted risk-standardized rate was 10.90%, varying by hospital type. The highest risk-standardized readmission rate was in hospitals (11.43%), followed by general hospitals (9.40%) and tertiary hospitals (7.04%). Conclusion: The newly developed, hospital-wide all-cause readmission measure can be used in quality and performance evaluations of hospitals in Korea. Needed are further methodological refinements of the readmission measures and also strategies to implement the measure as a hospital performance indicator.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.3
• /
• pp.246-257
• /
• 2019

This paper aims to consider and draw policy implications for industrial crisis areas in advanced European countries with extensive experience in implementing regional industrial policies for regions facing industrial and employment crises due to deindustrialization, the decline of main industries, and industrial restructuring. In Europe, the paradigm and focus of support policies for industrial crisis areas have varied from time to time and from country to country. In particular, since the 2008 global economic crisis, it has again become a major issue of regional policy. Europe's recent policies for industrial crisis areas are characterized by a new model of development, with its focus on regional economic growth and job creation, and in the form of multifaceted and comprehensive regional policies through policy mix that combines regional development policies, industrial policies and employment policies.

• International Area Studies Review
• /
• v.13 no.3
• /
• pp.461-480
• /
• 2009

In proposing the concept of flow which focuses on experiencing the sites visited by Korean wave tourists as induced by drama or movies, this paper investigated role of involvement variables for Korean wave tourists in influencing flow construct of film sites. The involvement of Korean wave was found to operate as a mechanism by which challenge, skills, focused attention on site might be more organized or more actively experienced. This recognizes that there is clearly a need for making the FIT sites exposed much by any mix of various media. This study showed that challenges and skills influence enjoyment as output factor of flow film site visitors are assumed to participate the roles of film characters, experiencing the places and atmosphere. The degree of visitors' reflections in the film optimizes awareness of flow experiences on the site. Therefore, it is necessary to provide more detailed experiential program on the film sites with the wide variety of flow-related contents in the film.