• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1053-1059
• /
• 2009

In this study, slope hazards mitigation methods for a natural terrain are systematically classified to survey the mitigation methods and develop a data base system. Also, field survey sheets which can be recorded the features of mitigation methods installed in the natural slope are developed. The slope hazards mitigation methods in the natural slope are classified as hillside part method and valley part method. The slope part sheet and the valley part sheet are also drawn up for field survey. As the result of the filed survey of mitigation methods about 50 points in Muju and Jangsu area, grass painting and slope covering methods are dominant in case of slopes part. In case of valley part, slit dam, concrete check dam and slope foot barrier are applied simultaneously.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.518-527
• /
• 2014

Objectives: The adverse health effects attributed to exposure to radon have been well known over the world. However, the efforts for prevention and mitigation of radon have not been taken in Korea so far. The purpose of this study was to evaluate the effectiveness of mitigation methods applied for various types of houses and public buildings with high level of radon. Methods: Based on the results of "National Radon Survey" performed by the National Institute of Environmental Research(NIER) in 2010-2012, we selected 30 candidate buildings consisting of 20 houses and 10 public buildings with greater than $148Bq/m^3$ of radon level. We measured the concentration of radon in 30 buildings, using E-PERMs and RAD-7 during January to March of 2013. More than five E-PERMs and one RAD-7 per house were installed for seven days. Ten houses and five public buildings were finally chosen to be mitigated after mainly considering the level of radon and the location of buildings nationwide. Three mitigation methods such as Sealing, two types of Active Ventilation(window-shaped and wall-typed ventilations), and Active Soil Depressurization(ASD) were applied, and the concentrations of radon were measured before and after mitigation, respectively. To evaluate the effectiveness of mitigation methods, reduction rates of radon were calculated and Wilcoxon's signed-rank test was performed. Results: The mean concentration of 15 buildings just before radon mitigation was $297.8Bq/m^3$, and most of the buildings were located in Gangwon, Chungbuk, Chungnam, and Daegu areas(73.3%), and built in 1959-1998. The level of radon decreased from 48% to 90% and kept the below recommendation limit of $148Bq/m^3$ after installation of radon mitigation. Among mitigation methods applied, the reduction rate(58.7-90.4%) of radon attributed to ASD was the greatest than that of other methods, followed by Active Ventilation(48.4-78.4%) and Sealing(<22%). The effectiveness of radon reduction by window-shaped Active Ventilation(63.2-75.2%) was relatively better than that of wall-typed Active Ventilation(48.4-54.3%). Conclusions: The results of this study indicate that ASD could be more effective for radon mitigation. Moreover, our findings would be background information in future for making the strategy for radon mitigation nationwide, as well as for developing Korean-version of mitigation techniques according to types of dwellings in Korea.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.417-422
• /
• 2003

Rockfall mitigation methods have been widely constructed along railway lines but aren't estimated with any economic analysis methods up to now. Therefore, this study applied a benefit-cost analysis to rockfall mitigation method to determine whether it is indeed an economically efficient construction. The Benefits were estimated based on data collected from disaster history, and included three types of benefits that are originated by reduction of train accident, train delay and rockfall removing cost. The costs included both construction cost and the maintenance cost of the selected method. This analysis could clarify the investment effect of rockfall mitigation method that would be built at rockfall prone slope.

• Journal of Environmental Impact Assessment
• /
• v.2 no.2
• /
• pp.49-53
• /
• 1993

Before the EIA was established in the Federal Republic of Germany, the impact mitigation principle - a planning instrument, which has its legal foundation in the German nature conservation legislation already had {and still has} the function to valuate environmental impacts. The valuation principles and methods which have been developed in correlation to this instrument are now also used in the EIA. Particularly for the valuation of alternating effects on the different ecological landscape functions and for the valuation of ecological mitigation and compensation measures this valuation methods are used. These methods base on a special kind of modelling nature and environment Following the aim of the nature conservation act, which is to save the capacity of the landscape to perform its essential functions, not the ecological factors (soil, water, air etc.) itselfs are evaluated but the ecological functions of the landscape, which are based on the ecological factors.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.354-356
• /
• 2001

The demand of the power and gas energy have been rapidly increasing with the industralization, therefore, the area where buried pipelines run parallel with the adjacent power lines and cross them increases in Seoul as well as other cities. These situation cause AC interference from the power lines. However, there aren't any standards to preserve the pipelines from AC interference in Korea. We just use other country's criteria directly. Other developed countries have used the various AC interference mitigation methods such as lumped grounding. cancellation wires and gradient control wires etc.. This paper introduces the steel plate method which is using for AC interference mitigation method in Korea and investigates the effects of mitigation methods through case study by computer simulation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.302-311
• /
• 2008

There have been repetitive landslides and debris flows on natural terrain induced by intensive rainfalls which have never been experienced during the last a few decades in Korea. Frequencies and magnitudes of landslides and debris flows are steeply increased after 2000 resulting in huge damages of human beings and facilities. According to a statistical data from NEMA, the human deaths induced by landslides and slope hazards occupies 22.3% of the total human deaths by all the natural hazards in Korea during the last 30 years. Among the human deaths by landslides and slope hazards, 85% of the damages were caused by landslides and debris flows on natural hazards. Therefore, this paper summarizes important events of landslides and debris flows, their characteristics, and suggests some methods of damage mitigation.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.270-272
• /
• 2005

With the wide spread of direct current (DC) electric railroads in Korea, the stray currents from negative return rails become a pending problem to the safety of nearby underground infrastructures, such as gas pipelines, water distribution lines, heat pipelines, POF cables, etc. The mitigation of such interference, however, is mainly dependent on stray current drainage bond methods, which connect the underground metallic structures to the negative feeder cables attached to the rails with diodes (polarized drainage) or thyristors (forced drainage). Despite some merits of these methods, they increase the total amount of stray currents from rails and cause other interference problems. In this paper, we summarize the domestic conditions of stray current interference and describe a conceptual design of other mitigation methods for such interference.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.1
• /
• pp.51-60
• /
• 2000

The mitigation technique is to minimize influences to the environments, and it is one of the environmental management(or administration) to techniques. Its objective is to create sustainable environment by keeping human assistance to the environment as minimal as possible. It restores, creates, enhances, and most importantly preserves the environment by avoiding, minizing, rectifying, eliminating, and compensating the natural circumstances The evaluation of adverse effects to the environment and their reduction is as follow: HEP(Habitat Evaluation Procedure) WET(Wet land evaluation technique) HGM(Hydro Geomorphic Assessment) BEST(Biological Evaluation Standardized Technique) Since there are both pro and cons in the American and Japanese mitigation methods, it is hard to choose which one is better.

• Membrane and Water Treatment
• /
• v.11 no.1
• /
• pp.31-39
• /
• 2020

Anaerobic membrane bioreactor (AnMBR) treatment has been widely studied in recent years because of the potential for production of bio-energy from wastewater and energy-positive operation of wastewater treatment plants. Several AnMBR systems, including those that incorporate ceramic membranes, take advantage of enhanced water permeability and low membrane fouling potentials. Given that differences in the ceramic membranes may influence the results of AnMBR studies, relevant details are discussed in this review, which focuses on the profiles of common ceramic membranes used in AnMBR, treatment and filtration performances of different anaerobic ceramic membrane bioreactors (AnCMBRs), and the membrane fouling mitigation methods available for effective AnCMBRs operation. The aim of this review is to provide a comprehensive summary of AnCMBR performance, feed wastewater characteristics, operating conditions, and the methods available for effective fouling mitigation.

• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.767-777
• /
• 2011

Power electronic systems such as switching power supplies are accounted as noise sources for other sensitive circuits. EMI caused by power converters can disturb the normal operation of the converter and other adjacent systems. Major research is concentrated on EMI mitigation for power converters in which the main concern is compliance with EMC standards to ensure proper operation of converters and nearby systems. This paper reviews EMI reduction techniques related to switching power converters with emphasis on the conducted EMI. A comprehensive review of significant research works is performed and various methods are thoroughly discussed and compared. Also, a classification of methods is presented. Moreover, converter prototypes are realized which contain several EMI mitigation techniques and their effects are presented via experimental results.