• Journal of the Optical Society of Korea
• /
• 제10권2호
• /
• pp.57-62
• /
• 2006

Adaptive optics (AO) has been applied in various fields including astronomy, ophthalmology and high power laser systems. An adaptive optics system for a high power laser is not significantly different from other AO systems in the point of configuration except that high energy absorbed by the deformable mirror distorts the deformable mirror surface and so degrades system performance. Currently we are researching a bimorph deformable mirror for beam cleaning of a high power class laser. The bimorph mirror was considered to have 99% reflective coating and 1% absorption. So this paper first presents the temperature profiles and corresponding thermal distortions of the bimorph mirror faceplate when the mirror is under a high power lasing for 10 seconds. The analysis was accomplished by the use of finite difference and finite element computer programs to generate the element arrays, calculate the temperature profiles, and determine the structural deformations. Then this paper proposes an 'embedded wafer' type water-cooling system with derived cooling parameters.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.13-20
• /
• 2001

본 논문에서는 큰 출력 저항파 기준 전류와의 정합 특성이 우수한 새로운 전류 미러를 제안한다. CMOS 증폭기 회로에서 전원 전압이 작아지는 경우 출럭 전압의 스윙 폭이 전원 전압에 의해 제한되는 단점이 있으므로 제안된 회로는 이런 단점을 해결하기 위해 출력단의 스윙을 키우고, 안정된 동작올 할 수 있도록 한다. 출력단 부하가 큰 경우에 구동 능력을 증대시키고, 작은 전원 전압을 가질 때에도 큰 출력 스윙을 갖는 전류 미러를 시뮬레이션을 통해 가존의 캐스코드 전류 미러와 Regulated 전류 미러의 특성을 비교 및 고찰한다.

• 대한수학회지
• /
• 제43권5호
• /
• pp.951-965
• /
• 2006

In this paper, we study a topological mirror symmetry on noncommutative complex tori. We show that deformation quantization of an elliptic curve is mirror symmetric to an irrational rotation algebra. From this, we conclude that a mirror reflection of a noncommutative complex torus is an elliptic curve equipped with a Kronecker foliation.

• 대한수학회지
• /
• 제57권5호
• /
• pp.1135-1165
• /
• 2020

Polishchuk-Zaslow explained the homological mirror symmetry between Fukaya category of symplectic torus and the derived category of coherent sheaves of elliptic curves via Lagrangian torus fibration. Recently, Cho-Hong-Lau found another proof of homological mirror symmetry using localized mirror functor, whose target category is given by graded matrix factorizations. We find an explicit relation between these two approaches.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.625-628
• /
• 1999

In this paper, we consider the problem of finding the depth of a object in two images taken with cameras. For solving this problem, we introduce a spherical concave mirror model. First, a virtual concave mirror is assumed, and then a scene is obtained by camera at two different position which are on the surface of the mirror. The depth of object is calculated from two scenes by using the spherical-mirror equation. The algorithm has been tested on a real scene containing several objects, and showed that it is more useful for farther object.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.128-129
• /
• 1999

Polygon Mirror Scanning(PMS) is composed of LED array, magnifying lens, polygon mirror and motor. It is important to correct the lens aberrations to gain the image we want to show. In this paper, we have simulated the lens aberration correction to reduce the spherical aberration . We have obtained a aspherical lens which is corrected the spherical aberration.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1194-1202
• /
• 2002

A study on the topology optimization of a multi-spectral camera for space-use is presented. The optimization is carried out under self-weight and polishing pressure loading. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. As an objective function, a measure of Strehl ratio is used. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criteria method. For the light-weight primary mirror design, a three dimensional model is treated. As a preliminary example, topology optimization considering a self-weight loading is treated. In the second example, the polishing pressure is also included as a loading in the topology optimization of the mirror. Results of the optimized design topology for the mirror with various mass constraints are presented.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.682-687
• /
• 2011

일반적으로 탑재 교정을 위한 교정 반사경 구동장치는 교정임무 수행 시에는 주광경로 상의 전개위치로 반사경을 구동하며, 교정 후에는 주광경로와 이격된 수납위치로 반사경을 구동한다. 교정 반사경 구동장치의 결함 발생 시에는 반사경이 전개된 상태로 남아 주광경로를 차단하지 않도록 반사경을 강제 수납한다. 본 논문에서 제안한 결함 안전장치를 가지는 교정용 반사경 구동장치는 구동을 위한 스텝모터, 전개 및 수납 상태확인을 위한 마이크로 스위치, 베어링과 스프링의 기능을 동시에 갖는 피봇베어링 등으로 구성된다. 본 논문에서는 상기의 기능을 갖는 교정 반사경 구동장치 구현을 위한 구동장치 구성을 제안하였으며, 구성요소의 최적화 설계치를 도출하고 기능시험을 통해 결함안전 기능을 갖는 교정 반사경 구동장치의 유효성을 검증하였다.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.223-226
• /
• 2009

A Magneto-Optical Trap (MOT) for $^{87}Rb$ atoms near the surface of a dielectric coated mirror at the top of a small $20{\times}25{\times}40\;mm^3$ cell has been observed. Two beams of $3.3\;mW/cm^2$ were used for optical cooling and an anti-Helmholtz magnetic field with a spatial gradient of 9.1 G/cm was used for magnetic trapping. The thickness of the mirror coated on a cover glass was less than $100{\mu}m$. The mirror covered the top of a cell and the atom-chip was located outside the vacuum in order to exploit the long life time of the mirror and easy operation of the chip. The trapping position was found 5 mm beneath the mirror surface. The number of trapped atoms was roughly $3{\times}10^7$ atoms and the temperature was approximately a few tens mK. In this paper, we describe the construction of the mirror-MOT in detail.

• 대한물리의학회지
• /
• 제13권1호
• /
• pp.81-88
• /
• 2018

PURPOSE: The present study aims to determine the effect of lower extremity muscle strength exercise at the non-paralyzed side of patients of stroke using a mirror on gait and balance. METHODS: Subjects were assigned randomly to a group of lower extremity exercise without using a mirror (n=10), a group of lower extremity motion exercise using a mirror (n=10), and a group of lower extremity muscle strength exercise using a mirror (n=10). The exercise is added to a physiotherapy program conducted at the hospital and subjects conducted their designed lower extremity exercises 30 times a day (5 sets), five days per week for four weeks. RESULTS: The study result showed that BBS(Berg balance scale)(p<.05) and TUG(timed up and go test)(p<.05) had a significant difference. In the comparison on gait ability, stride length, step length, step width and single support was a significant difference within two groups using a mirror before and after the intervention(p<.05). CONCLUSION: Conclusively, low extremity motion exercise using a mirror and low extremity muscle strength exercise using a mirror conducted along with general physiotherapy exercises had a positive effect on functions of lower extremity in patients with stroke and the recovery of paralyzed side thereby incurring a significant difference in balance and gait abilities.