• 한국광학회지
• /
• 제20권5호
• /
• pp.276-280
• /
• 2009

Cr:YAG 결정을 포화흡수체로 사용하여 수동형 Q-스위치시킨 다이오드 레이저 여기 Nd:$YVO_4$ 레이저를 제작하였다. Cr:YAG 결정의 한 면에 여기 빛 파장(808 nm)에 대해 고반사 코팅을 한 후, Nd:$YVO_4$ 결정과 접촉시켜 공진기를 구성하였다. Cr:YAG의 한 면에 여기 다이오드 레이저를 반사시키는 코팅을 입혀 공진기의 광변환 효율을 높임과 동시에, 여기빔에 의한 포화흡수체의 표백현상을 방지하여 안정된 출력이 나오게 하였다. 레이저 이득 매질 및 포화흡수체의 온도는 열전 냉각기와 냉각수를 사용하여 안정화 시켰다. 온도안정화를 시킨 상태에서 발진되는 펄스의 첨두 출력 요동(peak to peak)은 4%였다. 다이오드 레이저의 출력이 1 W일 때, 출력 펄스의 반복률은 평균 9 KHz 였으며, 최소 펄스폭은 7.11 ns, 최고 출력은 16.27 mW였다.

• 한국소프트웨어감정평가학회 논문지
• /
• 제16권1호
• /
• pp.55-63
• /
• 2020

광대역 광통신 시스템에 사용되는 레이저는 우수한 주파수 선택성과 모드 안정성을 가져야한다. DFB(Distributed Feedback) 레이저는 고주파로 전류 변조를 하더라도 발진 주파수의 변화가 적다. 본 연구에서는 1.55um의 파장을 갖는 DFB 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 오른쪽 거울 면에 반사가 일어나지 않도록 유전막 코팅을 하여 ρ_r=0 이 되도록 하였다. 문턱에서 최소 이득을 필요로 하는 제 1모드에 대하여, 종 방향으로의 발진 모드의 빔 분포와 방사전력비 P_l/P_r를 ρ_l의 위상=π인 경우와 ρ_l의 위상=π/2인 경우에 대하여 비교 검증했다. ρ_l의 위상=π인 경우, 낮은 문턱 전류와 높은 주파수 안정성을 얻기 위해서는, κL이 8보다 커야 한다. ρ_l의 위상=π/2인 경우, 낮은 문턱 전류를 위해서는 κL=1.0이 되도록 해야 하고, 이때 발진 주파수는 격자 주파수와 일치한다. 반사 방지 코팅을 하지 않은, 두 개의 거울 면을 가진 1.55um의 파장을 갖는 DFB 레이저보다, 한쪽 거울 면에 무반사 코팅을 한 경우에 모드 선별성이 훨씬 크다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권2호
• /
• pp.70-77
• /
• 2017

Where there are all the flowers, the songs of all kinds of insects and birds are put in, the sunshine and shadows flicker The forest through which the water sound flows is an optimum resting space. All living creatures in these spaces will awaken the five senses of humans and perhaps turn the sensibility index (EQ). The forest meditation in the forest, which can be an optimal shelter for the people who need it, needs to feel the reverence of nature, to refine emotions, to be a self-reflection, to have a mind to respect, Have an important meaning. In this paper, we tried to consider the cause of the influence of forest sounds on human hearing from the acoustical aspect. The type of sound source of forest was divided into four seasons of spring, summer, autumn, winter. And the change in the duration of the sound during the four seasons, so that the general characteristics of the sounds of the four seasons are as follows: It can be seen that the change in the ratio of sub-band energy is almost equal to the change in dB in frequency of the equal-light curve. To compare this phenomenon, the criterion for changing the sound duration of each forest is natural The main forms of the luminance curve, such as the change in the duration of the white signal in the sound, are determined by the minimum, maximum audible frequency and the most sensitive frequency band, and the auditory characteristics of the other three inflection points Determines the overall shape of the equal-light curve.

• Carbon letters
• /
• 제22권
• /
• pp.36-41
• /
• 2017

Biodegradable epoxy (B-epoxy) was prepared from diglycidyl ether of bisphenol A and epoxidized linseed oil. The mechanical properties of B-epoxy composites reinforced with multi-walled carbon nanotubes (MWCNTs/B-epoxy) were examined by employing dynamic mechanical analysis, critical stress intensity factor ($K_{IC}$) tests, and impact strength tests. The electromagnetic interference shielding effectiveness (EMI-SE) of the composites was evaluated using reflection and absorption methods. Mechanical properties of MWCNTs/B-epoxy were enhanced with an increase in the MWCNT content, whereas they deteriorated when the MWCNT content was >5 parts per hundred resin (phr). This can likely be attributed to the entanglement of MWCNTs with each other in the B-epoxy due to the presence of an excess amount of MWCNTs. The highest EMI-SE obtained was ~16 dB for the MWCNTs/B-epoxy composites with a MWCNT content of 13 phr at 1.4 GHz. The composites (13 phr) exhibited the minimum EMI-SE (90%) when used as shielding materials at 1.4 GHz. The EMI-SE of the MWCNTs/B-epoxy also increased with an increase in the MWCNT content, which is a key factor affecting the EMI-SE.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.119-123
• /
• 2017

This paper presents a unique and miniaturized dual-band coplanar waveguide (CPW-fed) antenna for modern wireless communication. A new technique of using a modified ground structure (MGS) and frequency shifting strips (FSS) has been employed in the design to achieve dual-frequency operation. The proposed antenna generates two separate impedance bandwidths and covers the minimum required frequency bands of GSM 1800, GSM 1900, and Wi-Fi/WLAN 5 GHz. The proposed antenna is relatively small ($17{\times}20mm^2$) and operates over frequency ranges 1.51~2.06 and 4.43~6.70 GHz. The designed antenna was simulated using Ansoft HFSS, a FEM based simulator, and antenna characteristics, such as reflection coefficient, gain, radiation efficiency, radiation pattern, impedance bandwidth, VSWR, surface current, and electric field distributions, are reported in this paper. The effect of the antenna's key structural parameters on its performance is also analyzed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.255-257
• /
• 2014

항내 정온도는 항만의 박지(泊地) 내 수면의 정온한 정도를 나타내는 것으로서, 선박의 접이안, 하역작업과 관계가 있지만 이보다 안전한 피항지로서의 최소한의 수역을 파악하기 위한 중요한 지표이다. 따라서, 항내 정온도 예측시 항외로부터 입사하는 파랑의 굴절, 회절, 천수 및 반사 등에 의한 항내파고 및 파향의 변화를 복합적으로 해석해야 한다. 그러나 항내 정온도 검토를 위하여 현재 운용 중인 수치모형실험은 각각의 특성에 따른 결과의 상이함에 따라 이에 대한 기본적인 재검토가 필요한 것으로 판단되며, 이에 본 연구에서는 후포항을 대상으로 수치모형실험결과와 비교함으로써 현재 운용 중인 모형의 타당성을 검토하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.11-16
• /
• 2006

본 연구는 이종 접착 재질의 접착계면에서 미접착 결함을 검출하기 위한 새로운 시험 기법을 개발하기 위함이다. 접착계면과 미접착계면에서의 초음파 전달 현상을 이론적으로 해석하여 초음파 신호를 모델링하였고, 이론적 분석에 기초하여 미접착계면에서의 위상 반전 현상을 애용한 검사 방법을 FRP/고무 시편에 적용하였다. 정량적으로 결함의 최소 검출 능력을 평가하기 위하여 알루미늄/고무 시편에 평저공을 가공하여 제작하였고 일반적으로 사용하고 있는 펄스에코반사법과 새로운 시험 기법인 위상반전법을 상호 비교하였으며 이론적으로 예측한 초음파 신호와 실험에서 얻은 초음파 신호를 근거로 위상반전법으로 미접착 결함을 검출할 수 있다고 판단하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.842-845
• /
• 2005

A method for the numerical simulation of two-dimensional free-surface flow resulting from the propagation of regular gravity waves over topography with arbitrary bottom shape is presented. The method is based on the numerical solution of the Euler equations subject to the fully nonlinear free-surface boundary conditions and the appropriate bottom, inflow and outflow conditions using a hybrid finite-differences and spectral-method scheme. The formulation includes a boundary-fitted transformation, and is suitable for extension to incorporate large-eddy simulation (LES) and large-wave simulation (LWS) terms for turbulence and breaking wave modeling, respectively. Results are presented for the simulation of the free-surface flow over two different bottom topographies, with constant slope values of 1:10 and 1:20, two different inflow wave lengths and two different inflow wave heights. An absorption outflow zone is utilized and the results indicate minimum wave reflection from the outflow boundary. Over the bottom slope, lengths of waves in the linear regime are modified according to linear theory dispersion, while wave heights remain more or less unchanged. For waves in the nonlinear regime, wave lengths are becoming shorter, while the free surface elevation deviates from its initial sinusoidal shape.

• 한국수산과학회지
• /
• 제38권5호
• /
• pp.316-322
• /
• 2005

In order to develop a floating breakwater, which can efficiently control long period waves, vertical plates are attached in pontoon. Wave control and dynamic behaviors of the newly developed vertical plates type are verified from numerical analysis and hydraulic experiment. As a result, for the wave control and energy dissipation, the newly developed vertical plates type is more efficient than the conventional pontoon type. For the floating body motion, the wave transmission, depending on incident wave period, is decreased at the natural frequency. Dimensionless drift distance has similar trend of the reflection rate of wave transformation near natural frequency except maximum and minimum values. Dimensionless maximum tension is 17 percent of the weight of floating breakwater in case of the conventional pontoon type and 18 percent or 14 percent in case of the newly developed vertical plates type. Thus, it is shown that the wave control is improved by the vertical plates type. In addition, by adjusting the interval of the front and back vertical plate, we would control proper wave control.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.673-681
• /
• 2014

Due to the increased demand for safety and security requirements on the port infrastructure, the harbor tranquility is one of the important parameter in the mooring basin of harbor. It relates keenly to berthing/unberthing and cargo handling works but also it is an important indicator to get the minimum water area as the safe refuge. Hupo harbor is a national coastal harbor located in east coast of Korea and a development plan for a new marina near the entrance is being carried out including berth layouts, breakwater extensions, 300m marina berths, dredging and land reclamation works. The new plan will impact on calmness of the existing port. Therefore, it is necessary to analyze in complex the variation of wave height and direction caused by wave refraction, diffraction, shoaling and reflection from the incident waves from outside the harbor. In order to check the calmness inside a harbor, the numerical models are being used currently need fundamental reviews according to the difference of results which depend on their respective features. In this study, hence, it was introduced the validity of numerical models by comparing the computational results with the hydraulic model experiment. The current investigations contribute to the existing development recommendations and provide further solutions for port planning.