• 교육녹색환경연구
• /
• 제9권1호
• /
• pp.23-31
• /
• 2010

Recently, there are effects such as commercial investment and introducing new technology by introducing a BTL project. As a result, School's conditions are getting better and Numbers of certified schools are increasing, because the Green Building Certification Criteria was created in 2002 and expanded to schools in March, 2005. But the certificated schools just get the minimum score for certificate level 'good' about 65 points and there is no certificated school level 'very good'. The users of school stay in long time in the facility cause of the unique function of school. It means Indoor Environment Quality Criterion of the school is very important than any other criteria. Therefore, this study aims to analyze the indoor environment factor for the plan of the certificated school by green building rating systems. And this study also wants make the basement of a substantial technical application and development of the criteria in the plan for sustainable green school.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.277-295
• /
• 1997

After clinical adjustment of dental casting restoration, re-polishing procedure is recommanded because the smooth gold sureface is lost. But there is the possibility to get more loose contact than that intended by loss of gold alloy according to the kinds of polishing materials and polishing time. Therefore in this study I polished type II gold alloy with 390gm force, 20,000rpm speed, and 8 kinds of gold alloy polishing materials, fabricated by 4 companies and then measured the amount of loss of gold alloy with Surfcorder SEF-30D and observed alloy surfaces polished by 3 brown rubber points with SEM. The amount of loss of gold alloys polished with 8 kinds of polishing materials and the degree of smoothness of gold alloys according to polishing time and polishing materials were compared. The following results were obtained : 1. When the amount of loss of gold alloys polished with 3 kinds of brown rubber point was compared, Alphalex brown point had the most amount of alloy loss, followed in decreasing order by Shofu brown point and Eveflex brown point. There was statistically significant difference in the amount of alloy loss according to polishing materials. 2. When the amount of loss of gold alloys polished with 5 kinds of green rubber point was compared, Shofu green point had the most amount of alloy loss, followed in decreasing order by Alphaflex green point, Dedeco green clasp polisher, and Eveflex green point. There was statistically significant difference in the amount of alloy loss according to polishing materials except Alphaflex green point and Dedeco green clasp polisher. 3. When the amount of loss of gold alloys polished with all kinds of rubber point was compared, there was no significant difference in Eveflex brown point, Alphaflex green point, and Dedeco green clasp polisher. 4. When average amount of alloy loss per 1 revolution by polishing materials was compared, Alphalex brown point had the greatest value as $0.329{\mu}m$ and Shofu supergreen point had the lowest value as $0.022{\mu}m$. 5. When the degree of sureface smoothness of gold alloy polished with 3 kinds of brown rubber point was compared, In Alphalex brown point surface roughness was completely lost after 20 seconds polishing time, in Shofu brown point 30 seconds, in Eveflex brown point 40 seconds. But in every gold alloys fine scratch formed by rubber points was observed. Based on the results of this study, as rubber polishing materials used in polishing of dental casting restoration after clinical adjustment influenced on the tightness of occlusal or proximal contact, we should make dental casting restoration with minimum error through careful laboratory procedure and form very smooth surface of restoration with tripoli and rouge after use of silicone polishing materials.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.747-749
• /
• 2006

SMS Meer GmbH, formerly Mannesmann and today part of the SMS Group, has been building powder presses since the early 1950s. The patents developed here in this field have long since documented the pioneering work carried out for the PM industry. The paper focuses on the challenge of reconciling the contradictory demands in the production of highly complex and crack-free PM parts. The process employed with the patented Controlled Punch Adapter (CPA) [1] counters possible cracking reliably and directly at the source. In this way is it possible to develop new and highly complex parts to series production maturity in a minimum of time even without simulation of the press cycle [2]. The quality data achieved in the production series, almost 100% crack and micro crack-free green parts with optimum density distribution over all press levels is unrivalled and thus gives the user a clear lead over the competition.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.292-296
• /
• 2022

(La_0.5Nd_0.2Sr_0.3)MnO₃ specimens were prepared by a solid-state reaction. In all specimens, X-ray diffraction patterns of an orthorhombic structure were shown. The fracture surfaces of (La_0.5Nd_0.2Sr_0.3)MnO₃ specimens showed a transgranular fracture pattern be possibly due to La ions (0.122 nm) as a perovskite A-site dopant substituting for Nd ions (0.115 nm) having a small ionic radius. The full-width at half maximum (FWHM) of the Mn 2p XPS spectra showed a value greater than that [8] of the single valence state, which is believed to be due to the overlapping of Mn²⁺, Mn³⁺, and Mn⁴⁺ ions. The dependence of Mn 2p spectra on the Mn³⁺/Mn⁴⁺ ratio according to sintering time was not observed. Electrical resistivity resulted in the minimum value of 100.7 Ω-cm for the specimen sintered for 9 hours. All specimens show a typical negative temperature coefficient of resistance (NTCR) characteristics. In the 9-hour sintered specimen, TCR, activation energy, and B25/65-value were -1.24%/℃, 0.19 eV, and 2,445 K, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.305-307
• /
• 1997

Gd-doped $CeO_2$, ultrafine powders were synthesized by the glycine-nitrate process and then their sintering and electrical characteristics were analysed using the dilatometric and AC impedance measurements. In the dilatometric measurements green bodies from the synthesized powders after milling shrinked to about $1470^{\circ}C$ in appearance and then expanded thermally with the increase of the heating temperature, whereas those from the synthesized powders before milling continuously shrinked to the temperatures of $1600^{\circ}C$. It may be due to the change of the packing density of the synthesized powders by milling. In the AC impedance measurements, the electrical resistivity of the Gd-doped $CeO_2$ bodies from the as-milled powders, sintered at $1500^{\circ}C$ with the increase of the sintering time, showed the minimum value at the sintering time of 10h. The minimum total resistivity of the Gd-doped $CeO_2$ bodies sintered at $1500^{\circ}C$ for 10h seems to result from the lowest activation energy by the combination between the activation energies for the resistivities at the grain interior and grain boundary.

• 대한지리학회지
• /
• 제36권2호
• /
• pp.126-140
• /
• 2001

서울시 종로구에 위치한 창경궁, 창덕궁, 종묘와 그 주변 지역을 사례로 소규모의 도시 녹지(녹지율 100%)가 주변 시가지의 기온에 미치는 영향을 분석하였다. 연구에 이용된 자료는 2000년 9월부터 11월까지 실측한 최고.최저 기온값 및 차량이동관측에 의한 실시간 기온값, 서울시 자동기상관측소의 시간별 기온값, 서울시 토지 이용현황도 서울시 현존식 생도, 09시 지상일기도이다. 맑고 바람이 약한 날의 주간에는 토지이용상태가 기온의 공간적 분포에 영향을 미친다. 최고기온의 경우, 녹지로 구성된 고궁에서 기온이 가장 낮고 녹지에서 멀어져 시가지 쪽으로 갈수록 높아져 녹지와 시가지간의 기온차이는 최대 7.3$^{\circ}C$에 달한다. 또한 시가지 내에서도 토지이용상태가 주거지나 공급용지(병원이나 학교)인 곳보다 고밀도의 상업지역에서 기온이 더 높다 야간에는 냉기류의 흐름으로 토지이용상태뿐만 아니라 지형도 기온분포에 중요한 역할을 한다. 차량이동관측에 의한 녹지 주변 기온의 수평 단면도는 토지이용상태와 밀접한 관련성을 갖는데 녹지에서 멀어질수록 기온이 높아져 고궁 가장장리로부터 200m 떨어진 곳에서는 1$^{\circ}C$정도, 400m에서는 3~4$^{\circ}C$차이가 난다.

• 한국지능시스템학회논문지
• /
• 제23권1호
• /
• pp.57-64
• /
• 2013

본 논문에서는 약병의 크기와 색상정보 특징을 추출하여 약병영상 분류 기법을 제안한다. 약병영상 분류에 있어 유사한 크기와 모양을 지닌 약병이 다양하게 존재하므로, 약병의 한 가지 특징만으로는 약병을 분류하기가 어렵다. 이러한 약병의 분류 문제를 해결하기 위해 본 논문에서는 약병의 크기와 색상정보의 특징을 추출하여 약병을 분류하였다. 제안된 알고리즘의 첫 번째 단계에서는 약병영상에서 Red, Green, Blue의 이진화 문턱치(Binary threshold)를 이용하여 약병 영역의 MBR(Minimum Boundary Rectangle)을 추출하여 크기로 분류하였고, 두 번째 단계에서는 크기로 분류된 약병영상 가운데 조명의 조도 변화에 강인한 색상(Hue)정보와 RGB 각각의 채널에 대한 컬러 평균 비율 정보를 이용하여 약병을 분류하였으며, 마지막 단계에서는 SURF(Speeded Up Robust Features)알고리즘을 사용하여 데이터베이스에서 특징점을 추출한 후보군 약병영상과 입력 약병영상의 유사도가 가장 높은 약병영상을 검색하여 약병을 분류하였다. 실험을 통해 이러한 방법이 보다 효율적이고 신뢰성 있음을 입증하였다.

• 한국해양바이오학회지
• /
• 제2권4호
• /
• pp.263-266
• /
• 2007

Vibrio vulnificusis a causative agent of serious diseases in humans resulting from the contact of wound with seawater or consumption of raw seafood. Several studies aimed at detecting V. vulnificus have targeted vvh as a representative virulence toxin gene belonging to the bacterium. In this study, we targeted the rpoS gene, a general stress regulator, to detect V. vulnificus. PCR specificity was identified by amplification of 8 V. vulnificus templates and by the loss of a PCR product with 36 non-V. vulnificus strains. The PCR assay had the 273-bp fragment and the sensitivity of 10 pg DNA from V. vulnificus. SYBR Green I-based real-time PCR assay targeting the rpoS gene showed a melting temperature of approximately $84^{\circ}C$ for V. vulnificus strains. The minimum level of detection by real-time PCR was 2 pg of purified genomic DNA, or $10^3$ V. vulnificus cells from pure cultured broth and $10^3$ cells in 1g of oyster tissue homogenates. These data indicate that real-time PCR is a sensitive, species-specific, and rapid method for detecting this bacterium using the rpoS gene in pure cultures and in infected oyster tissues.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.48-55
• /
• 2019

Unmanned aerial vehicles (UAVs) using communications, sensors, and navigation equipment will play a key role in future warfare. Currently, UAVs are monitored to prevent misfire and accidents, and the conventional method adopted uses wires for data transmission and power supply. The repeated connection and disconnection of cables increases maintenance time and harms the connector. For convenience and stability, a wireless power transfer system to power UAVs is needed. Unlike other wireless power transfer (WPT) applications, the size of the receiving coils must be small, so that the WPT systems can be embedded inside space-limited UAVs. The small size reduces the coupling coefficient and transfer efficiency between the transmitting and the receiving coils. In this study, we propose a toroidal-shaped coil for a WPT system for UAVs with high coupling coefficient with minimum space requirements. For validation, conventional coils and the proposed toroidal-shaped coil were used and their coupling coefficient and power transfer efficiency were compared using simulated and measured results. The simulated and measured results were strongly correlated, confirming that the proposed WPT system significantly improved efficiency with negligible change in the space requirement.

• Journal of Microbiology and Biotechnology
• /
• 제20권3호
• /
• pp.569-573
• /
• 2010

A quantitative detection method for Salmonella in seafood was developed using a SYBR Green-based real-time PCR assay. The assay was developed using pure Salmonella DNA at different dilution levels [i.e., 1,000 to 2 genome equivalents (GE)]. The sensitivity of the real-time assay for Salmonella in seeded seafood samples was determined, and the minimum detection level was 20 CFU/g, whereas a detection level of 2 CFU/ml was obtained for pure culture in water with an efficiency of ${\geq}85%$. The real-time assay was evaluated in repeated experiments with seeded seafood samples and the regression coefficient ($R^2$) values were calculated. The performance of the real-time assay was further assessed with naturally contaminated seafood samples, where 4 out of 9 seafood samples tested positive for Salmonella and harbored cells <100 GE/g, which were not detected by direct plating on Salmonella Chromagar media. Thus, the method developed here will be useful for the rapid quantification of Salmonella in seafood, as the assay can be completed within 2-3 h. In addition, with the ability to detect a low number of Salmonella cells in seafood, this proposed method can be used to generate quantitative data on Salmonella in seafood, facilitating the implementation of control measures for Salmonella contamination in seafood at harvest and post-harvest levels.