• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.103-110
• /
• 2021

In the development of a Risk Monitor probabilistic safety assessment (PSA) model from the basic PSA model of a nuclear power plant, the modeling of common-cause failure (CCF) is very important. At present, some approximate modeling methods are widely used, but there lacks criterion of modeling accuracy and error analysis. In this paper, aiming at ensuring the accuracy of risk assessment and minimizing the Risk Monitor PSA models size, we present three basic issues of CCF model resulted from the changes of a nuclear power plant configuration, put forward corresponding modeling methods, and derive accuracy criteria of CCF modeling based on minimum cut sets and risk indicators according to the requirements of risk monitoring. Finally, a nuclear power plant Risk Monitor PSA model is taken as an example to demonstrate the effectiveness of the proposed modeling method and accuracy criteria, and the application scope of the idea of this paper is also discussed.

• Radiation Oncology Journal
• /
• v.27 no.3
• /
• pp.111-119
• /
• 2009

Purpose: This study aimed at assessing the value of fluorine-18 fluorodeoxyglucose positron emission tomography ($^{18}F$-FDG PET) for predicting the response of locally advanced rectal cancer to neoadjuvant CRT. Materials and Methods: Between August 2006 and January 2008, we prospectively enrolled 20 patients with locally advanced rectal cancer and who were treated with neoadjuvant CRT at the Korea Institute of Radiological and Medical Sciences. The treatment consisted of radiation therapy and chemotherapy, and this was followed by curative resection 6 weeks later. All the patients underwent $^{18}F$-FDG PET/CT both before CRT and 6 weeks after completing CRT. The measurements of the FDG uptake ($SUV_{max}$), the absolute difference (${\Delta}SUV_{max}$) and the percent $SUV_{max}$ difference (response index, $RI_{SUV}$) between the pre- and post-CRT $^{18}F$-FDG PET/CT scans were assessed. The measurements of the metabolic volume, the absolute difference (${\Delta}$metabolic volume) and the percent metabolic volume difference (response index, $RI_{metabolic\;volume}$) were also assessed. Results: Of the 20 patients who underwent surgery, 11 patients (55%) were classified as responders according to Dworak's classification. The post-CRT $SUV_{max}$ was significantly lower than the pre-CRT $SUV_{max}$. However, there were no significant differences in the $SUV_{max}$ and the metabolic volume reduction between the responders and non-responders. We used a minimum $SUV_{max}$ reduction of 67% as the cut-off value for defining a response, with a sensitivity of 45.5%, a specificity of 88.9%, a positive predictive value of 77% and a negative predictive value of 53.8%. Conclusion: Although there were no statistically significant results in this study, other studies have revealed that $^{18}F$-FDG PET/CT has the potential to assess the tumor response to neoadjuvant CRT in patients with locally advanced rectal cancer.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.27-35
• /
• 2017

Microbiological, physicochemical, and organoleptic properties of fresh-cut vegetables (FVs), carrots, green peppers, cherry tomatoes, and paprika after X-ray irradiation were evaluated to verify food quality suitable for the immune-depressed patients. Total concentrations of aerobic bacteria in non-irradiated samples, except for cherry tomatoes, were 1.63-3.34 log CFU/g. Irradiation dose exceed 0.4 kGy was used for carrots and green peppers whereas the sterilization dose of 0.2 kGy was used for both cherry tomatoes and paprika. A dose of 0.4 kGy was tentatively determined as the minimum allowable dose for sterilization of the FVs, based on $D_{10}$-values of X-ray irradiation (0.11-0.32 kGy) for Escherichia coli, Listeria monocytogenes, and Salmonella Typhimurium inoculated on the samples. With respect to the physiological properties, only hardness was significantly decreased as the absorbed dose increased; however, there were no significant differences in hardness of the sterilized samples using X-rays at 0.4 kGy compared with those of non-irradiated samples (p<0.05). Moreover, overall acceptance scores of the sterilized FVs were higher than 5.0 points on a 7-point scale, indicating a good organoleptic quality. In a survey on preference of hospitalized patients with cancer (n=50), the average scores for the sterilized FVs, except for carrots, were higher than 4.0 points. In conclusion, it is considered that the FVs, except for carrots, sterilized using X-rays at 0.4 kGy could be served to immune-depressed patients as hygienically safe foods with acceptable organoleptic properties.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.3
• /
• pp.183-190
• /
• 2001

Objective: Recently, microdissection of tissue sections has been used increasingly for the isolation of morphologically identified homogeneous cell populations, thus overcoming the obstacle of tissue complexity for the analysis cell-specific expression of macromolecules. The aim of the present study was to establish the minimal conditions required for the RNA extraction and amplification from the cells captured by the laser captured microdissection. Methods : Mouse ovaries were fixed and cut into serial sections (7 im thickness). Oocytes were captured by laser captured microdissection (LCM) method by using PixCell $II^{TM}$ system. The frozen sections were fixed in 70% ethanol and stained with hematoxylin and eosin, while the paraffin sections were stained with Multiple stain. Sections were dehydrated in graded alcohols followed by xylene and air-dried for 20 min prior to LCM. All reactions were performed in ribonuclease free solutions to prevent RNA degradation. After LCM, total RNA extraction from the captured oocytes was performed using the guanidinium isothiocyanate (GITC) solution, and subsequently evaluated by reverse transcriptase-polymerase chain reaction (RT-PCR) for glyceraldehyde-3-phosphate-dehydrogenase (GAPDH). Results: With the frozen sections, detection of the GAPDH mRNA expression in the number of captured 25 oocytes were not repeatable, but the expression was always detectable from 50 oocytes. With 25 oocytes, at least 27 PCR cycles were required, whereas with 50 oocytes, 21 cycles were enough to detect GA PDH expression. Amount of the primary cDNA required for RT-PCR was reduced down to at least 0.25 $\grave{i}$ l with 50 oocytes, thus the resting 19.75 il cDNA can be used for the testing other interested gene expression. Tissue-to-slide, tissue-to-tissue forces were very high in the paraffin sections, thus the greater number of cell procurement was required than the frozen sections. Conclusion: We have described a method for analyzing gene expression at the RNA level with the homogeneously microdissected cells from the small amount of tissues with complexity. We found that LCM coupled with RT-PCR could detect housekeeping gene expression in 50 oocytes captured. This technique can be easily applied for the study of gene expression with the small amount of tissues.

• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.229-235
• /
• 2004

Soy protein was hydrolyzed by 5 different pretenses and determinated antimicrobial activity of each hydrolysate. The soy protein hydrolysate treated by pretense from Aspergillus saitoi showed the highest antimicrobial activity among the protease studied and was used for further analysis. Soy protein hydrolysate was fractionated by ultrafiltration for M.W. 10,000,3,000 and 1,000. The M.W 1,000∼3,000 showed the highest antimicrobial activity. The minimum inhibition concentrations of obtained fraction were 0.5∼0.8 mg/mL for gram positive and negative microbials, and its activity was even observed after heating at 121$^{\circ}C$ for 10 min, suggesting that hydrolyzed protein having antimicrobial activity is quite heat-stable. Reverse-phase HPLC was further applied to separate the fraction and 8 peaks were found. Each 8 peaks were separated and pooled and measured antimicrobial activity. Among them, retention time of peak at 16.02 min showed the prominent antimicrobial activity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.254-260
• /
• 1999

Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS data transmission is needed; often ranges more than 1000 km. It has been, however, so far considered unsuitable for short distance application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper extensively analyzes characteristics of shot distance MB(Meteor Burst) path and shows the low duty rate may be improved by increasing burst rate through adapting antenna beam width to cover entire hot-spot region in the space and, by compensating effective burst length through cutting down man-made noises introduced by antenna. Based on the analysis, we are developed a small-opening-cavity antenna, especially designed for short distance MB path. In operation, the antenna is to be buried under ground surface so as to improve directivity and reduces noise introduction. The antenna exhibits power gain of 3 dB with 90 degree beam width and thus enables to illuminate entire hot-spot regions with the elevation angle of 8-90 degree which is the case of transmission less than 100 km. Directivity horizontal to earth surface is suppressed to minimum which enables to cut man-made noises from near-by sources down to more than 3 dB from the level reported with conventional 4 element Yagi. A series of experiments performed on 100 km MB paths have conformed that, with the antenna installed at receiving site, the burst rate and duration time have been noticed to increase by 10 and 20 percent respectively from the values obtained by conventional 4-element Yagi antenna under same testing condition.

• Microbiology and Biotechnology Letters
• /
• v.36 no.2
• /
• pp.142-148
• /
• 2008

To evaluate the antibiotic resistance of Enterococcus from salad and sprout, Enterococcus were isolated and identified from 47 salad samples and 37 sprout samples, and then their antibiotic resistances were analyzed. Ninety five Enterococcus, 41 strains from salad and 54 strains from sprout, were ultimately isolated. The frequent Enterococcus in salad and sprout were E. gallinarum, E. faecalis, E. faecium, E. hirae, and E. avium. Minimum inhibitory concentrations of the isolates for vancomycin were below $4{\mu}g/mL$, which were not high levels of resistance. All Enterococcus proved to be resistant to streptomycin and chloramphenicol. Twenty two percentage of the isolates were resistant to penicillin, however, almost the isolates were sensitive to tetracycline. Eighteen percentage of the isolates were resistant to erythromycin. All E. faecium and E. faecalis were found to be ampicillin-resistant, and seven E. faecalis and five E. faecium were resistant to rifampicin. Overall antibiotic resistances of Enterococcus isolates were relatively low and low resistance to vancomycin was similar to those evidenced by Enterococcus isolated from the other foods. Therefore, there may be no special risk from the antibiotics resistances of Enterococcus and especially vancomycin-resistant Enterococcus from the fresh-cut salads and the sprouts.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.38-46
• /
• 1999

o.25${\mu}m$ T-shaped gate P-HEMT is fabricated and used for design of X0band three stage monolithic microwave integrated circuit(MMIC) low noise amplifier(LNA). The fabricated P-HEMT exhibits an extrinsis transconductance of 400mS/mm and a drain current of 400mA/mm. The RF and noise characteristics show that the current gain cut off frequency is 65GHz and minimum noise figure(NFmin) of 0.7dB with an associated gain of 14.8dB at 9GHz. In the design of the three stage LNA, we have used the inductive series feedback circuit topology with the short stub. The effects of series feedback to the noise figure, the gain, and the stability have been investigated to find the optimal short stub length. The designed three staage LNA showed a gain of above 33dB, a noise figure of under 1.2dB, and ainput/output return loss of under 15dB and 14dB, respectively. The results show that the fabricated P-HEMT is very suitable for a X-band LNA with high gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.788-801
• /
• 1998

Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS data transmission is needed ; often ranges more than 1000 km. It has been, however, so far considered unsuitable for short distance application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper extensively analyzes characteristics of shot distance MB(Meteor Burst) path and shows the low duty rate may be improved by increasing burst rate through adapting antennal beam width to cover entire hot-spot region in the space and, by compensating effective burst length throughcutting down man-made noises introduced by antennal. Based on the analysis, we are developed a small-opening-cavity antennal, especially designed for short distance MB path. In operation, the antenna is to be buried under ground surface so as to improve directivity and reduces noise introduction. The antennal exhibits power gain of 3 dB with 90 degree beam width and thus enables to illuminate entire hot-spot regions with the elevation angle of 8-90 degree which is the case of transmission less than 100 km. Directivity horizontal to earth surface is suppressed to minimum which enables to cut man-made noises from near-by sources down to more than 3 dB from the level reported with conventional 4 element Yagi. A series of experiments performed on 100km MB paths have conformed that, with the antenna installed at receiving site, the burst rate and duration time have been noticed to increase by 10 and 20 percent respectively from the values obtained by conventional 4-element Yagi antennal under same testing condition.