• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.225-233
• /
• 2012

The research discusses interrelationship of structural and reliability importance measures which used in the probabilistic safety assessment. The most frequently used component importance measures, such as Birnbaum's Importance (BI), Risk Reduction (RR), Risk Reduction Worth (RRW), RA (Risk Achievement), Risk Achievement Worth (RAW), Fussel Vesely (FV) and Critically Importance (CI) can be derived from two structure importance measures that are developed based on the size and the number of Minimal Path Set (MPS) and Minimal Cut Set (MCS). In order to show an effectiveness of importance measures which is developed in this paper, the three representative functional structures, such as series-parallel, k out of n and bridge are used to compare with Birnbaum's Importance measure. In addition, the study presents the implementation examples of Total Productive Maintenance (TPM) metrics and alternating renewal process models with exponential distribution to calculate the availability and unavailability of component facility for improving system performances. System state structure functions in terms of component states can be converted into the system availability (unavailability) functions by substituting the component reliabilities (unavailabilities) for the component states. The applicable examples are presented in order to help the understanding of practitioners.

• Journal of Korean Society for Quality Management
• /
• v.40 no.4
• /
• pp.481-496
• /
• 2012

Purpose: This paper aims at improving inefficiency of an existing posterior preference articulation method proposed for dual response surface optimization. The method generates a set of non-dominated solutions and then allows a decision maker (DM) to select the best solution among them through an interval selection strategy. Methods: This paper proposes an iterative posterior preference articulation method, which repeatedly generates the predetermined number of non-dominated solutions in an interval which becomes gradually narrower over rounds. Results: The existing method generates a good number of non-dominated solutions not used in the DM's selection process, while the proposed method generates the minimal number of non-dominated solutions necessitated in the selection process. Conclusion: The proposed method enables a satisfactory compromise solution to be achieved with minimal cognitive burden of the DM as well as with light computation load in generating non-dominated solutions.

• Journal of Korean Society for Quality Management
• /
• v.31 no.3
• /
• pp.185-192
• /
• 2003

In this paper, the properties on the optimal replacement policies for the general failure model are developed. In the general failure model, two types of system failures may occur : one is Type I failure (minor failure) which can be removed by a minimal repair and the other, Type II failure (catastrophic failure) which can be removed only by complete repair. It is assumed that, when the unit fails, Type I failure occurs with probability 1-p and Type II failure occurs with probability p, $0\leqp\leq1$. Under the model, the system is minimally repaired for each Type I failure, and it is repaired completely at the time of the Type II failure or at its age T, whichever occurs first. We further assume that the repair times are non-negligible. It is assumed that the minimal repair times in a renewal cycle consist of a strictly increasing geometric process. Under this model, we study the properties on the optimal replacement policy minimizing the long-run average cost per unit time.

• Journal of Korean Society for Quality Management
• /
• v.39 no.4
• /
• pp.480-485
• /
• 2011

This paper presents a spare ordering policy for preventive replacement with minimal repair. To analyze the ordering policy, the failure process is modeled by a non-homogeneous Poisson process. Introducing the ordering, repair, downtime, replacement costs and salvage value, we derive the expected cost effectiveness as a criterion of optimality when the lifetime and lead times for the regular and expedited orders are generally distributed random variables. It is shown that, under certain conditions, there exists a finite and unique optimum ordering time which maximizes the expected cost effectiveness. A numerical example is also included to explain the proposed model.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2327-2335
• /
• 2018

Fluid catalytic cracking (FCC) is an important chemical process that is widely used to produce valuable petrochemical products by cracking heavier components. However, many difficulties exist in modeling the FCC process due to its complexity. In this study, a dynamic process model of a FCC process is suggested and its structural observability is analyzed. In the process modeling, yield function for the kinetic model of the riser reactor was applied to explain the product distribution. Hydrodynamics, mass balance and energy balance equations of the riser reactor and the regenerator were used to complete the modeling. The process model was tested in steady-state simulation and dynamic simulation, which gives dynamic responses to the change of process variables. The result was compared with the measured data from operating plaint. In the structural analysis, the system was analyzed using the process model and the process design to identify the structural observability of the system. The reactor and regenerator unit in the system were divided into six nodes based on their functions and modeling relationship equations were built based on nodes and edges of the directed graph of the system. Output-set assignment algorithm was demonstrated on the occurrence matrix to find observable nodes and variables. Optimal locations for minimal addition of measurements could be found by completing the whole output-set assignment algorithm of the system. The result of this study can help predict the state more accurately and improve observability of a complex chemical process with minimal cost.

• Proceedings of the Korea Database Society Conference
• /
• 2001.11a
• /
• pp.239-256
• /
• 2001

1. 일관성 (Consistency)과 표준화(Standardization) 2. 유용한 피드백의 제공 3 실수에 대한 대응책(Easy Error Handling) 4. 자기 위치정보의 제공(Internal Locus of Control) 5. 단기 기억부담의 최소화(Minimal Memory Load) (중략)

• Journal of Welding and Joining
• /
• v.12 no.2
• /
• pp.20-27
• /
• 1994

The laser marking system is widely used in many industrial manufacturing companies as an effective process, because it is versitile, clean, and fast to run. Minimal heat deformation and zero tool wear can be obtained using fast and non-contact process of laser marking. As an introductory level, the basic knowledges about laser marking system layout and its components are presented with diagrams. The effects, requirements, and application example of laser marking process are also described in this paper.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.17-24
• /
• 1998

This paper deals with the springback characteristics of cold rolled sheet steel through the use of the V-bending process and U-bending one. The influence of material properties on the springback of forming processes was investigated. In the V-bending process there was an optimum bend radius for each combination of parameters which produced minimal springback. In the U-bending process the blank holder force can control the degree of springback. A high blank holding force resulted in a uniform strain distribution and reduced the level of springback.

• BMB Reports
• /
• v.30 no.5
• /
• pp.362-369
• /
• 1997

Multiple phosphorylation of the carboxy-terminal domain (CTD) of the largest subunit in RNA polymerase II (RNAP II) is thought to play an important role in the transcription cycle. The preinitiation complex in a partially purified complete transcription system suggested that RNA polymerase IIA containing unphosphorylated CTD is involved in complex assembly, whereas RNA polymerase IIO containing Ser and Thr phosphorylated CTD is not involved in preinitiation complex assembly. Recently a minimal transcription system was developed which requires chemically defined minimal components for its transcription: TBP, TFIIB, TFIIF, RNAP II and a supercoiled adenovirus-2 major late promoter (Ad-2 MLP). It would be using interesting to determine the consequence of CTD phosphorylation on preinitiation complex formation using the minimal transcription system. Contrary to the results from the partially purified complete transcription system, both RNA polymerase IIA and IIO are equally recruited in the preinitiation complex formation. The discrepancy may result from the two different assays used to determine complex formation, the use of chemically undefined complete and defined minimal transcription systems. This implicates that some factors in the complete transcription system are involved in the distinction between RNAP IIA and IIO in complex assembly. In addition multiple tyrosine phosphorylation of the CTD of RNAP II was prepared with c-Abl kinase and its recruiting ability in the preinitiation complex was examined. Compare with Ser and Thr phosphorylated RNAP IIO, Tyr phosphorylated RNAP IlOy forms a stable preinitiation complex in both the minimal and complete transcription systems. Based on these results, it seems that tyrosine phosphorylation of the CTD is important in the transcription cycle on the special subset of class-II promoter or has a different role in the transcription process.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.142-152
• /
• 2019

There is growing interest in ultra-high-resolution content that gives a more realistic sense of presence than existing broadcast content. However, in order to provide ultra-high-resolution contents in existing broadcast services, there are limitations in view angle and resolution of the image acquisition device. In order to solve this problem, many researches on stitching, which is an image synthesis method using a plurality of input devices, have been conducted. In this paper, we propose method of dynamic object based video stitching using minimal error seam in order to overcome the temporal invariance degradation of moving objects in the stitching process of horizontally oriented videos.