• The korean journal of orthodontics
• /
• v.48 no.5
• /
• pp.304-315
• /
• 2018

Objective: The purpose of this study was to analyze initial displacement and stress distribution of the maxillofacial complex during dentoskeletal maxillary protraction with various appliance designs placed on the palatal region by using three-dimensional finite element analysis. Methods: Six models of maxillary protraction were developed: conventional facemask (Type A), facemask with dentoskeletal hybrid anchorage (Type B), facemask with a palatal plate (Type C), intraoral traction using a Class III palatal plate (Type D), facemask with a palatal plate combined with rapid maxillary expansion (RME; Type E), and Class III palatal plate intraoral traction with RME (Type F). In Types A, B, C, and D, maxillary protraction alone was performed, whereas in Types E and F, transverse expansion was performed simultaneously with maxillary protraction. Results: Type C displayed the greatest amount of anterior dentoskeletal displacement in the sagittal plane. Types A and B resulted in similar amounts of anterior displacement of all the maxillofacial landmarks. Type D showed little movement, but Type E with expansion and the palatal plate displayed a larger range of movement of the maxillofacial landmarks in all directions. Conclusions: The palatal plate served as an effective skeletal anchor for use with the facemask in maxillary protraction. In contrast, the intraoral use of Class III palatal plates showed minimal skeletal and dental effects in maxillary protraction. In addition, palatal expansion with the protraction force showed minimal effect on the forward movement of the maxillary complex.

• Biomedical Science Letters
• /
• v.5 no.1
• /
• pp.27-40
• /
• 1999

This study was focused on the evaluation of MarB alongside with MarA for its regulatory effects upon the efflux function of AcrAB pump, which were induced or not, perhaps as a target. Transductions of marR and/or acrAB mutation which were derived from Mar and/or AcrAB mutants of wild type E. coli K-12, respectively, into the multicopy plasmid in wild type E. coli backgrounds or into the chromosome of isogenic parents were done. Minimal inhibitory concentration (MIC) of transduced mutants was compared with their original mutants. This study reports the indirect evidences that suggests a model in which MarB along with MarA have a putative negative regulatory effect upon the efflux function of AcrAB/TolC pump while MarA alone have a positive regulatory effect to the expression of acrRAB operon at transcription level. The target of MarB with MarA for its putative negative regulator might be the AcrAB efflux pump. Another efflux system (s) might be negatively regulated by MarB with MarA, and be involved in the efflux of antibiotics which were otherwise extruded preferentially by AcrAB efflux pump.

• Journal of Periodontal and Implant Science
• /
• v.42 no.2
• /
• pp.50-58
• /
• 2012

Purpose: This study evaluated histologically the tissue responses to and the effects of a customized nano-hydroxyapatite (n-HA) block bone graft on periodontal regeneration in a one-wall periodontal-defect model. Methods: A customized block bone for filling in the standardized periodontal defect was fabricated from prefabricated n-HA powders and a polymeric sponge. Bilateral $4{\times}{\times}4{\times}5$ mm (buccolingual width${\times}$mesiodistal width${\times}$depth), one-wall, critical-size intrabony periodontal defects were surgically created at the mandibular second and fourth premolars of five Beagle dogs. In each dog, one defect was filled with block-type HA and the other served as a sham-surgery control. The animals were sacrificed following an 8-week healing interval for clinical and histological evaluations. Results: Although the sites that received an n-HA block showed minimal bone formation, the n-HA block was maintained within the defect with its original hexahedral shape. In addition, only a limited inflammatory reaction was observed at sites that received an n-HA block, which might have been due to the high stability of the customized block bone. Conclusions: In the limitation of this study, customized n-HA block could provide a space for periodontal tissue engineering, with minimal inflammation.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.6
• /
• pp.611-619
• /
• 2017

Objective : In addition to bone bridging inside a cage or graft (intragraft bone bridging, InGBB), extragraft bone bridging (ExGBB) is commonly observed after anterior cervical discectomy and fusion (ACDF) with a stand-alone cage. However, solid bony fusion without the formation of ExGBB might be a desirable condition. We hypothesized that an insufficient contact area for InGBB might be a causative factor for ExGBB. The objective was to determine the minimal area of InGBB by finite element analysis. Methods : A validated 3-dimensional, nonlinear ligamentous cervical segment (C3-7) finite element model was used. This study simulated a single-level ACDF at C5-6 with a cylindroid interbody graft. The variables were the properties of the incorporated interbody graft (cancellous bone [Young's modulus of 100 or 300 MPa] to cortical bone [10000 MPa]) and the contact area between the vertebra and interbody graft (Graft-area, from 10 to $200mm^2$). Interspinous motion between the flexion and extension models of less than 2 mm was considered solid fusion. Results : The minimal Graft-areas for solid fusion were $190mm^2$, $140mm^2$, and $100mm^2$ with graft properties of 100, 300, and 10000 MPa, respectively. The minimal Graft-areas were generally unobtainable with only the formation of InGBB after the use of a commercial stand-alone cage. Conclusion : ExGBB may be formed to compensate for insufficient InGBB. Although various factors may be involved, solid fusion with less formation of ExGBB may be achieved with refinements in biomaterials, such as the use of osteoinductive cage materials; changes in cage design, such as increasing the area of polyetheretherketone or the inside cage area for bone grafts; or surgical techniques, such as the use of plate/screw systems.

• Journal of Life Science
• /
• v.18 no.11
• /
• pp.1507-1512
• /
• 2008

In spite of long research period for Salmonella typhi, little information is known about the pathogenesis mechanism of human typhoid fever caused by S. typhi due to lack of infection model in animals. A wild-type of S. typhi Ty2 strain requires cysteine to grow on minimal media. We hypothesized that this cysteine requirement may restrict colonization of S. typhi in animals during infection process. Among the S. typhi strains carrying Salmonella typhimurium genomic library, we have isolated three S. typhi transformants growing on minimal media without cysteine. Although there were three ORFs in DNA of pBP71, the STM1490 ORF complemented cysteine auxotrophy of S. typhi. Analysis of the deduced amino acid sequence of the STM1490 homolog in S. typhi revealed that there are differences in two amino acids. Plasmids containing amino acid substitutions in STM1490 supported S. typhi growth on minimal media without cysteine, indicating irrelevance of these two amino acids to STM1490 function. These results tells us that there are other factors or systems involved in cysteine requirement of S. typhi.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.302-309
• /
• 2016

Urea-SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, model based open loop control for urea injection was developed and assessed in the European Transient Cycle (ETC) for heavy duty diesel engine. On the basis of the transient modeling, the kinetic parameters of the $NH_3$ adsorption and desorption are calibrated with the experimental results performed over the zeolite based catalyst. $NH_3$ storage or surface coverage of SCR catalyst can not be measured directly and has to be calculated, which is taken into account as a control parameter in this model. In order to reduce $NH_3$ slip while maintaining NOx reduction, $NH_3$ storage control algorithm was applied to correct the basic urea quantity. If the actual $NH_3$ surface coverage is higher than the maximal $NH_3$ surface coverage, the urea injection quantity is significantly reduced in the ETC cycle. By applying this logic, the resulting $NH_3$ slip peak can be avoided effectively. With optimizing the kinetic parameters based on standard SCR reaction, it suggests that a simplified, less accurate model can be effective to evaluate the capability of model based control in the ETC cycle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1543-1549
• /
• 2012

This study focuses on the state space model and the design of a state observer for the slip dynamics between rolls in STS cold cluster mills. First, a mathematical model of the roll slip is given as a nonlinear differential equation. Then, by using a Taylor series expansion, it is linearized as a state space model. Next, by using Gopinath's algorithm, a minimal-order state observer based on the state space model is designed to estimate the angular speed of all idle rolls except for an actuated roll that is measureable. Finally, a computer simulation is used to validate that the proposed state space model very well describes slip dynamics between, and moreover, the state observer very well estimates the angular speed of the idle roll.

• Journal of Digital Convergence
• /
• v.19 no.10
• /
• pp.29-38
• /
• 2021

Purpose: This is a study to design an optimal Edutech teaching-learning platform model that can be linked with various types of LMS to activate e-learning. Methods: For this purpose, the contents of e-learning systems that can be used in the 4th industrial technology of cyber universities and general universities were cross-sectionally analyzed. Results: Cyber universities relied entirely on LMS, and general universities supplemented and utilized different Edutech methods for each professor such as Google Classroom, Zoom video communication, and YouTube in addition to LMS. It was considered that it would be meaningful to provide a minimal algorithm mapping to LMS to share metadata such as Google and YouTube for the Edutech teaching and learning platform model. Conclusion: Therefore, this study is expected to contribute to the improvement of teaching methods and academic achievement through the LMS-based Edutech teaching and learning platform model.

• Animal Bioscience
• /
• v.34 no.6
• /
• pp.949-956
• /
• 2021

Objective: This study was focused on the estimation of parameters of Wood's model and description of the lactation curve using the cows which were lactated over 24 months on the first lactation. Methods: The database included 1,333 pure-bred dairy Simmental primiparous cows which lactated for 24 months (732 days). The initial dataset entering the procedure of assessment of parameters of Wood's function included 35,826 milk yield records. Milk yield was recorded throughout lactation, with the earliest record taken on day 6 and the latest on day 1,348 of lactation. This dataset was used for the assessment of parameters a, b, c of Wood's model using the non-linear statistical procedure. These parameters were estimated for different length of lactation. The assessed parameters were used for calculation of some characteristics of lactation curves. Results: The lowest value of a parameter (15.2317) of Wood's model of lactation curve was found out in lactations up to 305 days long, contrary to b and c parameters which were highest in those lactations (0.1029 and 0.0015, respectively). The maximum value of a parameter (17.4329) was found out in lactations up to 640 days long, unlike b and c parameters which were minimal in those lactations (0.0603 and 0.0010, respectively). Conclusion: It can be concluded that the parameters of Wood's model and the shape of lactation curve are changing with the growing number of milk yield records. Also, the assessed parameters revealed a significant milk production potential after 305 days of lactation.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.11
• /
• pp.535-540
• /
• 2021

Multi-document refers to a document consisting of various topics, not a single topic, and a typical example is online reviews. There have been several attempts to summarize online reviews because of their vast amounts of information. However, collective summarization of reviews through existing summary models creates a problem of losing the various topics that make up the reviews. Therefore, in this paper, we present method to summarize the review with minimal loss of the topic. The proposed method classify reviews through processes such as preprocessing, importance evaluation, embedding substitution using BERT, and embedding clustering. Furthermore, the classified sentences generate the final summary using the trained Transformer summary model. The performance evaluation of the proposed model was compared by evaluating the existing summary model, seq2seq model, and the cosine similarity with the ROUGE score, and performed a high performance summary compared to the existing summary model.