• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.967-973
• /
• 1997

In this paper, the designed and fabrication of a K-band push-push oscillator using miniaturized hairpin resonator have been presented. One experimenal oscillator has been designed and fabricated for K-band point-to-point operation. the miniaturized harpin resonator has been analyzed theoretically and simulated by MPIE(Mixed Potential Integral Equation) method. With this results, the analysis of hairpin resonator which coupled microstrip line has been carried out with transmission-mode using this results. an optimized output matching network for the suppression of the fundamental and the 3rd order harmonic was acquired by using a nonlinear analysis method. The fabricated oscillator shows the output power of -2.28dBm, the fundamental frequency suppression of -19dBc, the 3rd order harmonic suppressionof -24dBc and 0.33 percent effiiency at 22.8GHz. The experimental outputs are in good agreement with the theoretical and simulated results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.2
• /
• pp.13-18
• /
• 2001

In this paper, a four-pole quasi-elliptic function bandpass filter of 1.95GHz center frequency with 60 MHz bandwidth for IMT-2000 using miniaturized square SIR(Stepped Impedance Resonator) is designed and fabricated. The simulation of NUFDTD(Nonuniform Finite Difference Time Domain) is used to design the resonator and to calculate the coupling coefficient of three basic structures. The size reduction of miniaturized square SIR resonator is about more than 50% compare with a square open loop resonator. Bandpass filter using this resonator shows good microwave characteristic with the harmonic suppression of about 19dB. The results of measurements are almost similar to those of simulation.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.315-317
• /
• 2009

In this letter, a novel antenna with a miniaturized aperture is proposed. The substrate including a split-ring resonator array is inserted into a size-reduced open-ended waveguide. For a low return loss and high radiation efficiency, the ring arrangement is optimized, and a stepped transition using H-plane discontinuity is proposed. The proposed antenna achieves a 70% aperture reduction compared to a conventional standard waveguide antenna of WR-187 (47.6 mm${\times}$22.2 mm). The return loss drops significantly at three frequencies, and a reasonable gain is achieved. The aperture-miniaturized antenna can be used in many antenna applications such as near-field measurement.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.282-287
• /
• 2003

″H″ type resonator has the advantage for the miniaturization of high-T7 superconducting (HTS) microstrip antenna in comparison with the conventional microstrip antenna such as rectangular type or circular type. In this paper we designed miniaturized HTS antennas using this "H"-type resonator and reported the characteristics of our antennas including return loss, bandwidth, radiation patterns, efficiency and so on. To fabricate the "H" type antenna, HTS YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between 50 $\Omega$ feed line and HTS radiating patch. The ″H" type superconducting antenna showed the performance of 1.38 in SWR, 26 % in efficiency, and 13.8 dB in the return loss superior to the normal conducting counterpart.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.529-532
• /
• 2006

This letter describes a compact printed helical resonator and its application to a microwave oscillator circuit implemented in coplanar waveguide (CPW) technology. The high quality (Q)-factor and spurious-free characteristic of the resonator contribute to the phase noise reduction and the harmonic suppression of the resulting oscillator circuit, respectively. The designed resonator showed a loaded Q-factor of 180 in a chip area of only 40% of the corresponding miniaturized hairpin resonator without any spurious resonances. The fully planar oscillator incorporated with this resonator showed an additional phase noise reduction of 10.5 dB at a 1 MHz offset and a second harmonic suppression enhancement of 6 dB when compared to those of a conventional CPW oscillator without the planar helical resonator structure.

• Journal of electromagnetic engineering and science
• /
• v.6 no.3
• /
• pp.160-164
• /
• 2006

This paper describes a compact printed helical resonator and its application to a microwave oscillator circuit implemented in coplanar waveguide(CPW) technology. The high Q-factor and spurious-free characteristic of the resonator contribute to the phase noise reduction and the harmonic suppression of the resulting oscillator circuit, respectively. The designed resonator resonating at the frequency of 5.5 GHz showed a loaded Q of 180 in a chip area of only 40 % of the corresponding miniaturized hairpin resonator without any spurious resonances. The fully planar oscillator incorporated with this resonator showed additional phase noise reduction of 10.5 dB at 1 MHz offset and a second harmonic suppression enhancement of 6 dB when compared to those of a conventional CPW oscillator without the planar helical resonator(PHR) structure.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.306-310
• /
• 2004

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.630-636
• /
• 2016

In this paper, a novel triple-mode cavity structure, designed for compactness and operating at 850 MHz, is analyzed. A cylindrical dielectric resonator is loaded into a metallic cylindrical cavity. Previous study has been focused on the analysis of the cylindrical dielectric resonator, but in this paper, the effect of the cylindrical metallic cavity has been analyzed. Enclosing the dielectric resonator inside the metallic cavity increases the resonant frequency of the dielectric resonator; however, this increases the quality factor and introduces the possibility of installing coupling screws. The principle of generation of triple-mode was investigated by parametric analysis. The generated triple-mode is TE011 mode and two orthogonally generated HEM121 modes. By adjusting the radius of the dielectric resonator, the height of the dielectric resonator, or the radius of the cylindrical metallic cavity, three modes could be coincided. However, the height of the metallic cavity keeps three modes separated. The mode characteristics of the proposed cavity are analyzed using a full-wave electromagnetic (EM) simulation. The proposed triple-mode cavity could be developed to triple-mode filter using a coupling screw, and the commercial application for the miniaturized filter below 1 GHz could be expected.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.424-428
• /
• 2000

In this paper, a MIC(Microwave Integrated Circuit) bandpass filter for wireless LAN(local area network) band is designed using hairpin resonators. The coupling between the hairpin resonators in the filter can be implemented with Y-Tpye coupling or X-Tpye coupling instead of conventional coupling in order to reduce the filter size. The filter with miniaturized hairpin resonator using parallel coupling is smaller in size by 50% more than that of a general hairpin filter

• Journal of Navigation and Port Research
• /
• v.35 no.4
• /
• pp.299-302
• /
• 2011

In this letter, the effect of quality factor on center frequency deviation in miniaturized coupled line bandpass filter (BPF) with diagonally end-shorted at their opposite sides and lumped capacitors is theoretically analyzed. The miniaturized BPF of a two-stage structure with two types of quality factors in standard CMOS process was designed and manufactured at 5.5 GHz. The die area of BPF was $1.44{\times}0.41\;mm^2$. The measured center frequency of BPF with a quality factor of 4.9 was deviated from 5.5 GHz to 4.7 GHz. The one with 14.8 was shifted to 5GHz. The theoretical and measured results validate that quality factor influences the center frequency shift of BPF.