• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.462-474
• /
• 2018

The development of bio-sensing technology made it easy to collect various biometric information that was only available in large medical devices. The miniaturization of sensors makes it simple to carry out various health checkups that It did in person to the hospital by improving the portability of diagnostic devices. It is able to combine sensors into portable devices such as Smartphones, apply advanced Internet of Things (IOT) technology, and create new form factors for medical devices such as ultra-small modules that can be inserted or attached to their bodies. The results can be checked immediately through portable information devices such as smart phones. Although commercialization is still slow in Korea, new technologies are being applied in various ways in countries such as the United States that have granted remote medical services. Medical demand, supply and cost in South Korea are growing ahead of a super-aged society. Under these circumstances, attention is focusing on whether smart healthcare, a new concept, can complement the existing medical system. This study identifies the technology trends associated with smart health care and categorizes various healthcare products in the UX design aspects. In addition, the UX design approach and guidelines for applying smart healthcare technologies to the elderly, the intended users, are presented. This research will provide a reference to a new social issue, the UX-design approach to solving the problems of the aged society.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.1-12
• /
• 2018

Heat waves during summer cause a qualitative degradation in urban environments and increases the number of patients who suffer from heat-related illnesses, and the urbanization deepens these problems. It is a prerequisite to analyze the current status accurately in order to assess the urban heat island phenomenon. Thus, this study aims to collect weather measurements information at the occurrence of a severe heat wave in Seoul, thereby allowing analysis of information, which will also consider the land use type. The weather measurement information used in the analysis had an advantage, as the gap between measured locations is considerably shorter than before due to the miniaturization of the automatic weather systems (AWS), which are connected through the communication network. Based on the above collected information, a temporal change in the data due to land use type was analyzed. As a result, the difference in temperature change in response to the land use type could be compared, as could the occurrence pattern of the tropical night phenomenon, and the effect on temperature reduction in green belt areas could be identified through the comparison of the intensity of heat island by time and land use. The methods and results derived in this study through the comparative analysis in terms of time and land use, weather information measurements, and mapping can be utilized as foundational data that can be referred to in urban planning to reduce the heat island phenomenon in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.821-827
• /
• 2018

In devices used for re-forming osteoblasts to treat osteoporosis, a magnetic field is applied from the outside of the bone, and the minerals contained in the bone are aligned in a certain direction and undergo precessional motion. When a $90^{\circ}$ RF pulse is applied by using an RF coil, protons of minerals are brought to an excited state, and phosphorus activity promoting the deposition of osteoblasts in the bone is increased, thereby reshaping the bone. Miniaturizing the RF coil that generates a signal corresponding to the harmonic of the precessional motional frequency by means of the $90^{\circ}$ RF pulse can drastically reduce the overall size of the bone reshaping system. In this study, we propose a methodology for the miniaturization of the RF coil that can be used for osteoblast re-formation using a bone reshaping system. The capacitance of the designed RF coil is 25 pF, the inductance is approximately 100 nH, and the resonance frequency is 96 MHz. The radius of the end ring of the designed RF coil is 18 cm, and the total length of the leg is $2{\times}11.6cm$. The performance of the coil is verified through post-design measurement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.299-302
• /
• 2014

Due to the convergence between digital devices and the development of wireless communication technology, bit-signal sensor miniaturization, building an Electronic Medical Record (EMR) which is a digital version of a paper chart that contains all of a patient's medical history and the information of Electronic Health Record (EHR), Ubiquitous healthcare (u-Healthcare) that can monitor their health status and provide personal healthcare service anytime and anywhere. Also, the appearance of cloud computing technology is one of the factors that accelerate the development of u-healthcare service. However, if the individual information to be used maliciously during the u-healthcare service utilization, leads to serious problems directly related to the individual's life because if it goes beyond the level of simple health screening and treatment, it may not provide accurate and reliable healthcare services. For this reason, we analyzed a variety of security issues related to u-healthcare service in cloud computing environment and described about directions of secure health information sharing system construction. In addition, we suggest the future developmental direction for th activation of u-healthcare industry.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.229-235
• /
• 2019

As the demand for broadband multimedia including the Internet explosively increases, the advancement of the subscriber network is becoming the biggest issue in the telecommunication industry due to the surge of data traffic caused by the emergence of new services such as smart phone, IPTV, VoIP, VOD and cloud services. In this paper, we have developed WDM(Wavelength Division Multiplexing)-PON(passive optical network) based on the 1-Gigabit Reach Externder (RE) technique to reduce optical core. Particularly, in order to strengthen the market competitiveness, we considered low cost, miniaturization, integration technique, and low power of optical parts. In addition, we have developed a batch system by integrating all techniques for reliability, remote management through the development of transmission distance extension and development of capacity increase of optical line by using RE technology in existing PON network. Based on system interworking with existing commercial 1G PON devices, it can be worthy of achievement of wide nationalization and optical core reduction by using this developed system. Based on these results, we are studying development of 10G PON technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.639-647
• /
• 2019

Recently, as the semiconductor integration technology due to miniaturization and high density of electronic equipment have developed, it is importantly recognized the application of thermal control system in order to release inner heat generated from chips, modules, In this study, we considered the heat transfer and pressure drop characteristics in a horizontal channel with four blocks using k-${\omega}$ SST turbulence model During CFD (Computational Fluid Dynamics) analysis, the parameters applied block width, block height, heat source and turbulence generator placement etc. As the boundary conditions of analysis, the channel inlet temperature and flow velocity were respectively 300 K and 3.84 m/s, the heat flux was $358W/m^2$. As a result, the heat transfer performance was decreased as the block width ratio (w/h) was increased, while it was increased as the block height ratio (h/w) was increased. In addition, as the arrangement of heat source size was increased to high heat flux from low heat flux, it was influenced by heat source size and the heat transfer coefficient showed a tendency to increase, When the turbulence generator was installed in the upper part of block No. 1 position the closely to the channel entrance, the heat transfer characteristics was greatly influenced on the whole of four heating blocks. and in oder to consider the pressure drop characteristics, we are able to select the most appropriate turbulence generator's position.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.9-15
• /
• 2021

Miniaturization of semiconductor devices has recently faced a physical limitation. To overcome this, 3D packaging in which semiconductor devices are vertically stacked has been actively developed. 3D packaging requires three unit processes of TSV, wafer grinding, and bonding, and among these, copper bonding is becoming very important for high performance and fine-pitch in 3D packaging. In this study, the effects of Ti nanolayer on the antioxidation of copper surface and low-temperature Cu bonding was investigated. The diffusion rate of Ti into Cu is faster than Cu into Ti in the temperature ranging from room temperature to 200℃, which shows that the titanium nanolayer can be effective for low-temperature copper bonding. The 12nm-thick titanium layer was uniformly deposited on the copper surface, and the surface roughness (R_q) was lowered from 4.1 nm to 3.2 nm. Cu bonding using Ti nanolayer was carried out at 200℃ for 1 hour, and then annealing at the same temperature and time. The average shear strength measured after bonding was 13.2 MPa.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.243-250
• /
• 2021

In the medical field, applications of plasma are applied sterilize instruments mainly but with the advent of bio-plasma technology, the scope of application is expanding. Recently, In addition, high-density miniaturization with handheld is required for sophisticated procedures when irradiated directly or treated with non-standard conditions. Rosen-type PZT is a device with a structure that generates high voltage plasma by achieving voltage transformation through electro-mechanical coupling using piezoelectric effect.and is used in portable plasma generating devices as an advantage to increase energy density relatively. In this paper, Rosen-type PZT was modeled using equivalent circuits and was carried out and a plasma generating device for medical application was designed and prototype tested. Prototype plasma generating device generates an output voltage of 5.8 kV with 12V input power and is designed to operate at high voltage by applying the half-bridge topology power converter. The results of the study confirmed the availability of various medical devices, such as plasma jets or direct exposure equipment.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.97-105
• /
• 2020

Recently, as the data speed and operating frequencies of Ethernet keeps increasing, electro magnetic interference (EMI) also becomes increasing. The generation of such EMI will cause malfunction of near electronic devices. In this study, EMI filters were applied to reduce the EMI generated by DC-DC SMPS (switching mode power supply), which is the main cause of EMI generation of Ethernet switch. As the EMI filter, MLCCs with excellent withstanding voltage characteristics were used, which had advantages in miniaturization and mass production. Two types of EMI MLCC filters were used, which are X-capacitor and X, Y-capacitor. X-capacitor was composed of 2 MLCCs with 10 nF and 100 nF capacity and 1 Mylar capacitor. Y-capacitor was consisted of 6 MLCCs with a capacity of 27 nF. When only X-capacitor was applied as EMI filter, the conductive EMI field strength exceeded the allowable limit in frequency range of 150 kHz ~ 30 MHz. The radiative EMI also showed high EMI strength and very small allowable margin at the specific frequencies. When the X and Y-capacitors were applied, the conductive EMI was greatly reduced, and the radiation EMI was also found to have sufficient margin. In addition, X, Y-capacitors showed very high insulation resistance and withstanding resistance performances. In conclusion, EMI X, Y-capacitors using MLCCs reduced the EMI noise effectively and showed excellent electrical reliability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.310-316
• /
• 2021

Conventional satellites are generally large satellites that are multi-functional and have high performance. However, small satellites have been gradually drawing attention since the recent development of lightweight and integrated electric, electronic, and optical technologies. As the size and weight of a satellite decrease, the barrier to satellite development is becoming lower due to the cost of manufacture and cheaper launch. However, solar panels are essential for the power supply of satellites but have limitations in miniaturization and weight reduction because they require a large surface area to be efficiently exposed to sunlight. Space solar cells must be manufactured in consideration of various space environments such as spacecraft and environments with solar thermal temperatures. It is necessary to study structural materials for lightweight and high-efficiency solar cells by applying an unfolding mechanism that optimizes the surface-to-volume ratio. Currently, most products are developed and operated as solar cell panels for space applications with a triple-junction structure of InGaP/GaAs/Ge materials for high efficiency. Furthermore, multi-layered junctions have been studied for ultra-high-efficiency solar cells. Flexible thin-film solar cells and organic-inorganic hybrid solar cells are advantageous for material weight reduction and are attracting attention as next-generation solar cells for small satellites.