• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.760-771
• /
• 2012

In this paper, a blind spot of motor car, and the put case that is driven the miniature model motor system, when make practical application of the permanent magnet synchronous motors(PMSM) braking and having had the ability that can all absorb regenerative power by means of electric brake which is occurred. a tow system of a miniature model motor traction system is established by 1C1M methods to control individually permanent magnet synchronous motors (PMSM) of each motor. vector control method is applied in order to improve ride quality of motor car and the efficient use of energy. it was obtained excellent experiment results from the simulations as a function of momentum load and miniature model. Also, this study is investigated the regenerative braking power securities of permanent magnet synchronous motors, speed detection to stop electric brake at extremely very low speed and motor control method of algorithm.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.297-304
• /
• 2007

For large and rapid screening of high-yielding mutants of lovastatin produced by filamentous fungal cells of Aspergillus terreus, one of the most important stage is to test as large amounts of mutated strains as possible. For this purpose, we intended to develop a miniaturized cultivation method using $7m{\ell}$ culture tube instead of traditional $250m{\ell}$ flask (working volume $50m{\ell}$). For obtaining large amounts of conidiospores to be used as inoculums for miniaturized cultures, 4 components i.e., glucose, sucrose, yeast extract and $KH_2PO_4$ were intensively investigated, which had been observed to show positive effect on enhancement of spore production through Plackett-Burman design experimet. When optimum concentrations of these components that were determined through application of response surface method (RSM) based on central composite design (CCD) were used, maximum spore numbers amounting to $1.9\times10^{10}$ spores/plate were obtained, resulting in approximately 190 fold increase as compared to the commonly used PDA sporulation medium. Using the miniaturized cultures, intensive strain development programs were carried out for screening of lovastatin high-yielding as well as highly reproducible mutants. It was observed that, for maximum production of lovastatin, the producers should be activated through 'PaB' adaptation process during the early solid culture stage. In addition, they should be proliferated in condensed filamentous forms in miniaturized growth cultures, so that optimum amounts of highly active cells could be transferred to the production culture-tube as reproducible inoculums. Under these highly controlled fermentation conditions, compact-pelleted morphology of optimum size (less than 1 mm in diameter) was successfully induced in the miniaturized production cultures, which proved essential for maximal utilization of the producers' physiology leading to significantly enhanced production of lovastatin. As a result of continuous screening in the miniaturized cultures, lovastatin production levels of the 81% of the daughter cells derived from the high-yielding producers turned out to be in the range of 80%$\sim$120% of the lovastatin production level of the parallel flask cultures. These results demonstrate that the miniaturized cultivation method developed in this study is efficient high throughput system for large and rapid screening of highly stable and productive strains.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.95-102
• /
• 2008

A miniature metal bellows is used to minimize the excessive flow of the cryogenic gas in Joule-Thomson micro cryocooler. It is made of metal alloy and its geometry is axisymmetric. The bellows is filled with high pressure gas. It contracts or expands in the axial direction for a wide change of temperature, because the pressure and volume inside the bellows must be satisfied with state equation of the gas. Therefore, in order to design the bellows in Joule-Thomson micro-cryocooler, it is important to evaluate deformation of the bellows under internal pressure exactly. Considering geometric nonlinearity, deformations analysis of the bellows were obtained by a commercial finite element code ANSYS, The bellows was modeled by 3-node axisymmetric shell elements with reduced integration. Experiments were also performed to prove the validity of proposed numerical analysis. The results by numerical analysis and experiments were shown in good agreements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.440-446
• /
• 2009

This paper was designed to fabricate the miniature spur gear with pitch circle of 2.25mm using extrusion process of a mechanically alloyed Al-78wt%Zn powder. The mechanical alloying of the powder particles were performed for ball milled times of 4h, 8h, 16 and 32h by the planetary ball milling. The mechanical properties of these alloyed powders, which were compacted and sintered-cylindrical preforms, were estimated using compression test. The results showed that the alloyed powder with average particle size of $10{\mu}m$ milled for 32h has the highest compressive(fractured) strength(288MPa). Extrusions of the miniature spur gear using the alloyed powder were carried out at different extrusion temperatures. Extrusion temperature of $300^{\circ}C$ provided the spur gear with the highest relative density and Vickers hardness and without any surface defects.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.242-243
• /
• 2002

• Journal of Embryo Transfer
• /
• v.29 no.1
• /
• pp.83-90
• /
• 2014

The main purpose of this study is to estimate the effect of adding Tea-N-Tris (TES) to the freezing buffer for miniature pig sperm. In particular, we attempted to identify the association between the MMPs expression and the fertility and viability of frozen sperm from each extender (LEY (Lactose Egg-Yolk), TLE (TES + LEY), TFGE (TES + Fructose + Glucose Egg-Yolk)). In accordance with this, Hypoosmotic Swelling Test (HOST) respond test was the lowest among sperms frozen in LEY while the highest HOST respond was observed among sperms frozen in TLE. Furthermore, we observed MMPs expression in all sperm groups, with pro-MMP showing lower expression than active MMPs. The expression of MMP-9 and MMP-2 was the highest in sperms frozen in LEY, Meanwhile, sperms from the TFGE and TLE group showed lower level of MMP-9 and MMP-2 expression in the order of TLE being the lowest. LEY group showed lower rate of blastocyst development than the TES supplement group, although the difference was not statistically significant. Meanwhile the rate of blastocyst development appeared similar when sperms from TLE and TFGE group were used for IVF. Together, these results indicate that adding Tea-N-Tris to the sperm freezing buffer only suppresses MMPs protein activation but also maximize in-vitro fertility, providing a means to improve the success rate in the in vitro manipulation of miniature pig sperm.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.85-91
• /
• 2011

The objective of this study was to evaluated the efficiency on sperm cryosurvival and ability of in vitro fertilization using Triladyl and Lactose Egg-Yolk(LEY) as extenders for cryopreservation of separated sperm by 65% percoll in miniature pig. Sperm viability was measured with SYBR-14/PI double stained sperm by flow cytometry. Ability on embryo cleavage rate and blastocyst development were observed by in vitro fertilization after frozen-thawing of sperm separated by 65% percoll. The experimental groups were designed that separated sperm by 65% percoll with Triladyl (ST) or LEY(SL) and unseparated sperm with Triladyl(UT) or LEY(UL) for cryopreservation. As a results, the viability was significantly(p<0.05) higher in ST(55.1%), SL(63.1%), UL(58.8%) than UT(38.2%) group. Sperm viability in SL(63.1%) group was significantly(p<0.05) higher than other experimental groups. On the other hand, embryo cleavage rate was significantly(p<0.05) higher in ST(79.1%), SL(83.2) than UT(74.1) and UL(75.7%) groups at 96h after in vitro fertilization. Blastocyst development was also significantly(p<0.05) higher in ST(21.5%), SL(20.9%) than UT(17.0%) and UL(18.8%) groups. In conclusion, cryopreservation of miniature boar sperm separated by 65% percoll were beneficial to viability and capacity on in vitro fertilization.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.265-271
• /
• 2011

This study was undertaken to find out the effect of methyl-beta-cyclodextrin (MBCD) on cold shock and membrane cholesterol quantity of sperm during the freezing process in miniature pigs. For this study, semen ejaculated from PWG M-type miniature pig was diluted that freezing solution (with egg yolk group) and m-Modena B (without egg yolk group) treated with 0, 1, 5, 10 and 20 mM MBCD before freezing process. The diluted semen was monitored sperm ability at room temperature, after cooled until $5^{\circ}C$ and after forzen-thawed for cold shock test of spermatozoa. Also, membrane cholesterol of sperm was extracted by folch solution at the same time sperm ability was assessed for viability and acrosomal status. The membrane cholesterol quantity was measured by thin-layer chromatography (TLC) method. The result, viability and acrosome integrity in semen diluted without egg yolk groups were decreased at all temperature range by increasing of MBCD concentration. In particular, sperm of egg yolk group was showed that significantly higher viability and lower acrosome damage when treated with 5 mM MBCD (p<0.05). The results of TLC experiment, cholesterol amounts were increased with MBCD cocentration in egg yolk, and decreased with MBCD concentration in m-Modena B. In cryopreservation efficiency, there was no significant difference at viability, and acrosomal state of sperm in 5 mM MBCD concentration was significantly lower in acrosome damage than other groups (p<0.05). Therefore, the addition MBCD in egg yolk was protected spermatozoa from cold shock injury. This protective effect of MBCD may be due to addition of sperm membrane cholesterol.

• Reproductive and Developmental Biology
• /
• v.34 no.1
• /
• pp.41-46
• /
• 2010

The objective of this study was to evaluated the efficiency of sperm cryosurvival using each extenders Triladyl and LEY containing egg yolk to the cryopreservation of separated sperm by percoll in miniature pig. The ejaculated semen from miniature pig was separated by 65% percoll and un-separated sperm as a control before freezing. The freezing of diluted semen added with Triladyl containing egg yolk and LEY solution (solution I: 11% Lactose or Triladyl + egg yolk; solution II: solution I + glycerol + OEP). Analysis of sperm ability was estimated by viability, capacitation acrosome reaction using chlortetracycline (CIC) the morphologic abnormality and hypoosmotic swelling test(HOST). The groups were designed that as separated sperm by Percoll with Triladyl(ST) or LEY(SL) for cryopreservation. And unseparated sperm with Triladyl(UT) or LEY(UL). As a results, the viability was higher significantly(p<0.05) in ST, SL, UT than UL extender. The morphologic abnormality was measured significantly (p<0.05) lower in ST than other extenders. The AR-patterned in CTC analysis was measured significantly(p<0.05) lower in SL and UL than other extenders. In conclusion, using Triladyl extender resulted in viability and morphology of separated sperm by percoll that were effective than using LEY extender, but it resulted in capacitation acrosome reaction was lower than using LEY extender.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.631-642
• /
• 2013

The standard CPT(Cone Penetration Test), which can be easily performed to investigate in-situ soil engineering properties, has been widely used. CPT are also widely being utilized in centrifuge model tests. In this study, a miniature cone with 10mm diameter was developed and its applicability in the centrifuge was evaluated. The developed miniature cone was equipped with a four degree-of-freedom in-flight robot. A series of cone penetration tests was performed under four centrifuge acceleration levels. As results, the cone resistances measured at the same confining stress within shallow penetration depth were affected by the centrifugal accelerations. The critical depth was proportional to the cone diameter and relative density. Cone resistances results below the critical depth and soil parameters obtained from the laboratory tests were compared with those by previously proposed empirical relations.