• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.83-92
• /
• 2023

In this study, we conducted verification of key influencing factors during cone penetration testing using the developed Mini Cone Penetration Tester (Mini-CPT), and compared the experimental results with empirical formulas to validate the equipment. The Mini-CPT was designed to measure cone penetration resistance through a Strain Gauge, and the resistance values were calibrated using a Load Cell. Moreover, the influencing factors were verified using a model ground constituted in a soil box. The primary influencing factors examined were the boundary effect of the soil box, the distance between cone penetration points, and the cone penetration speed. For the verification of these factors, the experiment was conducted with the model ground having a relative density of 63.76% in the soil box. It was observed that the sidewall effect was considerably significant, and the cone penetration resistance measured at subsequent penetration points was higher due to the influence between penetration points. However, within the speed range considered, the effect of penetration speed was almost negligible. The measured cone penetration resistance was compared with predicted values obtained from literature research, and the results were found to be similar. It is anticipated that using the developed Mini-CPT for constructing model grounds in the laboratory will lead to more accurate geotechnical property data.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.75-77
• /
• 2015

최근 사물인터넷 패러다임에 맞춰 많은 연구가 진행되고 있으나 대부분이 특정 임베디드 플랫폼들에 집중되고 있다. 본 논문에서는 사물인터넷을 위한 장치들과 네트워크를 관제하는 SmartX-mini 센터를 통한 자원수준 (resource-level) 모니터링 기능을 시험적으로 시도하며, 이를 검증하기 위해 SmartX-mini 테스트베드를 활용한다. 모니터링 기능에 대한 기초적인 설계를 바탕으로 구현된 기능들의 검증하여 사용자들에게 제공하는 편의를 확인하였다.

• Journal of Integrative Natural Science
• /
• v.15 no.2
• /
• pp.89-97
• /
• 2022

This paper presents the comprehensive feasibility study of solar mini-grid project located in Bajhang District, Sudur Paschim Province, Nepal. The study has been conducted with the aim of developing a suitable size solar mini-grid system to meet electricity demand of proposed settlements of the village people. The study forecasts that the estimated average daily peak power consumption of load is about 20kW and average daily energy demand of load is about 100-150kWh/day in the base year 2022. The shared ratio of productive end uses is about 25% of the total power consumption and about 27% of the total energy demand, which will be used for small business/income generation activities and required 45kWp size solar power generation mini-grid system. The estimated project cost for the proposed 45kW solar mini-grid system technology, including 3 years of operation & maintenance, as well as power distribution network up to end user's premises is about 0.24 million USD. It is concluded that 45kWp photovoltaic mini-grid is feasible for the location.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.2
• /
• pp.33-42
• /
• 2013

Due to the lack of available site in urban setting outdoor space in elementary schools are getting smaller and tend to be replaced by indoor spaces. Focusing on courtyard, piloti space and roof space, this study analyzed the current condition and usage of the outdoor spaces in the urban mini-schools based on the analysis of architectural drawing, interview, survey, and observation. Following issues are found for appropriate planning for outdoor spaces in the urban mini-schools. Firstly, roof space needs to be coordinated with the physical education and outdoor class curriculum and should be planned separately for quiet activities. Secondly, the piloti space should be planned as an independent space rather than a connection between classroom and outdoor space, with appropriate surveillance from teacher's space for the lower graders. Thirdly, courtyard space, typical space in urban mini school surrounded by densely arranged buildings, should be thermally controlled for outdoor class or resting with appropriate screen from noise to keep quiet atmosphere.

• Asia pacific journal of information systems
• /
• v.29 no.3
• /
• pp.489-502
• /
• 2019

The WeChat mini program is an application embedded in WeChat that users can use without downloading and installing. After it was officially released in 2017, many travel enterprises have launched their own mini programs on the WeChat platform. This study applies affordance theory to investigate the WeChat mini program's role in tourism activities through social network analysis using the R programming language. The authors searched the topic of "how do you perceive the travel-related WeChat mini program" and then crawled the 200 comments found; 180 comments were analyzed after data cleansing. The results show that travel-related WeChat mini programs play a very important role in Chinese social network tourism activities. This paper found that WeChat played a more active role in various tourism-related interactions with Chinese social networks. Moreover, the results show how affordance theory is applied to the use of WeChat mini programs.

• Journal of Global Scholars of Marketing Science
• /
• v.10
• /
• pp.187-212
• /
• 2002

Vietnams urban middle class is strongly value oriented in its shopping behavior. They want fairly good quality and service, but they also factor price into their considerations. In terms of retail patronage, they demand convenience, good service, attractive display, and especially want extensive choice. Brands must be present in multiple types of outlet, or fragile brand loyalties can be broken. Mini supermarkets have become an important part of the retail scene in the past decade, and have successfully introduced the supermarket concept to Vietnam. Many consumers are integrating mini supermarkets into their regular shopping, and are willing to pay the higher prices to gain the benefits of such shopping. However, the mini supermarkets do not adequately meet some of the things they expect from supermarkets. Large supermarkets are just entering the market, and are likely to capture much of the current mini supermarket customer base.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.3
• /
• pp.321-330
• /
• 1999

Background : Early diagnosis and proper antibiotic treatment are very important in the management of ventilator-associated pneumonia (VAP) because of its high mortality. Bronchoscopy with a protected specimen brush (PSB) has been considered the standard method to isolate the causative organisms of VAP. However, this method burdens consumer economically to purchase a PSB. Another useful method for the diagnosis of VAP is quantitative cultures of aspirated specimens through bronchoscopic bronchoalveolar lavage (BAL), for which the infusion of more than 120 m1 of saline has been recommended for adequate sampling of a pulmonary segment. However, occasionally it leads to deterioration of the patient's condition. We studied the diagnostic efficacy of minibronchoalveolar lavage (miniBAL), which retrieves only 25 ml of BAL fluid, in the isolation of causative organisms of VAP. Methods: We included 38 consecutive patients (41 cases) suspected of having VAP on the basis of clinical evidence, who had received antibiotics before the bronchoscopy. The two diagnostic techniques of PSB and miniBAL, which were performed one after another at the same pulmonary segment, 'were compared prospectively. The cut-off values for quantitative cultures to define causative bacteria of VAP were more than $10^3$ colony-forming units (cfu)/ml for PSB and more than $10^4$ cfu/ml for BAL. Results: The amount of instilled normal saline required to retrieve 25 ml of BAL fluid was $93{\pm}32 ml$ (mean${\pm}$SD). The detection rate of causative agents was 46.3% (19/41) with PSB and 43.9% (18/41) with miniBAL. The concordance rate of PSB and miniBAL in the bacterial culture was 85.4% (35/41). Although arterial blood oxygen saturation dropped significantly (p<0.05) during ($92{\pm}10%$) and 10 min after ($95{\pm}3%$) miniBAL compared with the baseline ($97{\pm}3%$), all except 3 cases were within normal ranges. The significantly elevated heart rate during ($l25{\pm}24$/min, p<0.05) miniBAL compared with the baseline ($1l1{\pm}22$/min) recovered again in 10 min after ($111{\pm}26$/min) miniBAL. Transient hypotension was developed during the procedure in two cases. The procedure was stopped in one case due to atrial flutter. Conclusion: MiniBAL is a safe and effective technique to detect the causative organisms of VAP.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4167-4172
• /
• 2023

Miniaturized tissue equivalent proportional counters (mini-TEPCs) are proper for radiation dosimetry in medical application because the small size of the dosimeter could prevent pile-up effect under the high intensity of therapeutic beam. However, traditional methods of calibrating mini-TEPCs using internal alpha sources are not feasible due to their small size. In this study, we investigated the use of electron and proton edges on Monte Carlo-generated lineal energy spectra as markers for calibrating a 0.9 mm diameter and length mini-TEPC. Three possible markers for each spectrum were calculated and compared using different simulation tools. Our simulations showed that the electron edge markers were more consistent across different simulation tools than the proton edge markers, which showed greater variation due to differences in the microdosimetric spectra. In most cases, the second marker, y_δδ, had the smallest uncertainty. Our findings suggest that the lineal energy spectra from mini-TEPCs can be calibrated using Monte Carlo simulations that closely resemble real-world detector and source geometries.

• The Korean Journal of Physiology
• /
• v.16 no.2
• /
• pp.153-157
• /
• 1982

It has been hypothesized that the effectiveness of the popular mini-trampoline as a conditioning device is due to the increased gravitational forces which are imparted to every cell in the body during its use. This study evaluated a means of determining the acceleration forces on a subject using a minitrampoline. By cinematic evaluation, a plot of the changes in distance over time was obtained. Using the formulas developed at the Arizona State University Crash Survival Investigators' School, the maximum acceleration forces were determined to be approximately $3.2+G_z$.

• The korean journal of orthodontics
• /
• v.41 no.5
• /
• pp.354-360
• /
• 2011

Objective: To investigate the effects of different pilot-drilling methods on the biomechanical stability of self-tapping mini-implant systems at the time of placement in and removal from artificial bone blocks. Methods: Two types of artificial bone blocks (2-mm and 4-mm, 102-pounds per cubic foot [102-PCF] polyurethane foam layered over 100-mm, 40-PCF polyurethane foam) were custom-fabricated. Eight mini-implants were placed using the conventional motor-driven pilot-drilling method and another 8 mini-implants were placed using a novel manual pilot-drilling method (using a manual drill) within each of the 2-mm and 4-mm layered blocks. The maximum torque values at insertion and removal of the mini-implants were measured, and the total energy was calculated. The data were statistically analyzed using linear regression analysis. Results: The maximum insertion torque was similar regardless of block thickness or pilot-drilling method. Regardless of the pilot-drilling method, the maximum removal torque for the 4-mm block was statistically higher than that for the 2-mm block. For a given block, the total energy at both insertion and removal of the mini-implant for the manual pilot-drilling method were statistically higher than those for the motor-driven pilot-drilling method. Further, the total energies at removal for the 2-mm block was higher than that for the 4-mm block, but the energies at insertion were not influenced by the type of bone blocks. Conclusions: During the insertion and removal of mini-implants in artificial bone blocks, the effect of the manual pilot-drilling method on energy usage was similar to that of the conventional, motor-driven pilot-drilling method.