• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2769-2773
• /
• 2014

In this work, a new family of polyhedral oligomeric silsesquioxanes (POSS) based esters have been synthesized that consists eight ester functional groups. These are classified into Type-I and Type-II esters based on the starting materials, octakis(3-chloropropyl)silsesquioxane (Cl-POSS) and octakis(3-hydroxypropyldimethylsiloxy) octasilsesquioxane (OHPS) respectively. These new POSS type ester moieties can be used as insulating oils and oil additives in the transformers and also considered to be alternatives to mineral and vegetable oils that are presently used in the insulation system.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.213-223
• /
• 2009

Conventional additives were added to a newly synthesized base oil to create synthetic lubricants. Commercial polyol ester prepared in this laboratory were obtained as esterification of 1,1,1-trimethylol propane and respectively. This newly synthesized base oil had a variable chemical structure that could achieved the following properties; oxidation or thermal stability, low temperature fluidity, and higher flash points. When compared with commercial mineral lubricants, the synthetic lubricants show superior thermal and oxidation stability, and anti-wear properties.

• 한국결정학회지
• /
• 제12권1호
• /
• pp.20-24
• /
• 2001

NiZn-ferrite was synthesized usign waste iron oxide catalysts which were produced from styrene monomer process and buried underground as an industrial wastes. The spinel type ferrite was obtained by calcination and sintering of the mixture of finely ground waste catalysts, nickel oxide and zinc oxide powders. The sintered body of Ni/sub 0.5/Zn/sub 0.5/Fe₂O₄ composition at 1230℃ for 5 hours showed the density of 5.38g/㎤, and initial permeability of 59 at 1 kHz. Not only cerium oxide, which existed as a major component in the catalyst, but also unicorporated NiO and ZnO into spinel structure remained as second phases after sintering.

• 한국수소및신에너지학회논문집
• /
• 제14권4호
• /
• pp.313-320
• /
• 2003

볼밀링법을 이용하여 타이타늄 스펀지와 칩 또는 스크랩으로부터 상온애서 직접 타이타늄 수소와 분말을 재조하는 실험을 행하였다. 실험결과 진공중에서 볼링을 행한 타이타늄 스펀지와 칩의 경우 24시간외 후 합금분말의 크기는 약 20 um 정도의 크기를 갖는 것을 확인하였다. 그러나 수소화 분위기에서 볼밀링을 행한 경우에 12시간 후 수소화분말의 입도는 0.1-0.2 um로 극히 미세한 합금 분말이 제조되었다. 수소분위기에서의 볼밀링에 의한 타이타늄 분말제조는 기존의 방법에 비해 열을 가하지 않고 타이타늄 수소화분말을 얻을 수 있다는 장점과 나노크기의 미세한 수소화 분말을 얻을 수 있음을 알 수 있었다.

• 벤처창업연구
• /
• 제4권2호
• /
• pp.21-58
• /
• 2009

The Purpose of this study is working out of the scientific-theoretical and practical recommendations directed on perfection of strategic planning of development of the enterprises of mining and gold mining branch. The methodological basis of research is based on the economic theory developed by a domestic and foreign science. At processing, generalisation and a writing of materials of the master's thesis following methods were applied: - supervision, - comparison, - the analysis and synthesis, - methods of an induction and deduction, - statistical groupings, - average and relative sizes, - the system approach. Finally, the theoretical and practical importance of this research consists that results of research will allow generating a basis of statement of effective system of strategic planning of a long-term sustainable development of the gold mining enterprises reducing risk of acceptance of inefficient strategic decisions. I would like to express many thanks to the NGO "Semey- My Home" and "EastGeoResources" LLP for their help and support in providing the data collection and data analysis stages of my research from 2006.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1989년도 제8회 학술강연회초록집
• /
• pp.1-21
• /
• 1989

합성윤활유(synthetic lubricant)라 함음 현재까지도 계속되고 있는 광유(mineral oil)전성시대의 광유에 대응되는 말로써 광유계 윤활유로 부터 얻기 어려운 높은 점도지수, 낮은 저온 유동성 등의 특성을 얻기 위해 유기합성 방법에 의해 인위적으로 제조한 윤활유의 총칭이며 작용기의 종류, 합성방법, 등에 따라 다양하게 분류된다. 합성윤활유의 종류에는 합성방법에 따라 폴리머형(P형), 비포리머형(N형)으로 대별되는데, 폴리머형 합성유에는 Poly-butene, $Poly\alpha$-olefin, Polyalkylenglycol, Silicon oil, Chlorofluorocarbon, Perfluoroalkyl polyether등이 있으며, 비폴리머형 합성유에는 Alkylbenzene, Dibasicacidester, Polyolester, Silicate-ester Polyphenylether, Complex ester등이 포함된다. 전자의 경우에는 중합반응 조건을 조절하므로써 여러점도 등급의 합성유들을 얻을 수 있는 반면 후자의 경우에는 분자량이 크지 않으므로 저점도의 것만 얻어지는 것이 특징이다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 1부
• /
• pp.323-326
• /
• 2011

HZSM-5, synthesized in fluoride medium, showed high selectivity for the formation of 1,4-diethylbenzene (1,4-DEB) in the vapour phase ethylation of ethylbenzene (EB) with ethanol and hence becomes a convenient eco-friendly substitute for hazardous mineral acid catalysts. De-ethylation of EB to benzene was also minimized over this catalyst. As the medium pore size and presence of weak and medium acid sites might be the cause of such benefits, fluoride mediated synthesis of ZSM-5 is proven to be advantageous for para-selective alkylation of alkyl aromatics.

• 약학회지
• /
• 제12권3_4호
• /
• pp.76-84
• /
• 1968

When 19-hydroxycholesterol acetate was added into CSD-10 in Nutrient Broth or in a mineral salts medium consisting of KH$_{2}$PO$_{4}$(0.1%), $K_{2}$HPO$_{4}$(0.1%), NH$_{4}$NO$_{3}$(0.1%), MgSO$_{4}$(0.02%), CaCl$_{2}$(0.002%), and FeCl$_{3}$(0.005%), a substantial amount of 19-hydroxyandrost-4-ene-3,17-dione was accumulated prior to accumulation of estrone. From this result and all of previous works, a tentative degradation pathway of 19-hydroxycholesterol acetate to estrone by CSD-10 was derived. 19-hydroxyandrost-4-ene-3,17-dione seems to be an attractive intermediate for the synthesis of 19-norsteroids.

• 한국세라믹학회지
• /
• 제15권4호
• /
• pp.199-204
• /
• 1978

In the present investigation, refined alumina obtained from alunite locally available was used as a aluminous source to synthesize monocalcium aluminate $(CA)_3$ the major mineral constituent of alumina cement. The influence of $SiO_2$ and $Fe_2O_3$ contents on the formation of monocalcium aluminate was studied by X-ray diffraction analysis mainly. About 0.8-1.0 of $Al_2O_3/C_3O$ mol ratio and less than 4 percent of $SiO_2$ were desirable for the effective formation of CA. The small amount of alkali and sulphur contents contained in refined alumina from alunite as the impurities were affected to form $C_4A_3S$ and $C_3S_2$, disadvantageous compounds for the alumina cement, therefore the impurities should be restricted in minimum content as possible.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.609-614
• /
• 1988

This study was carried out to investigate the effects of B4C or Y2O3 additives on the tendency of sintering, $\beta$-SiC synthesis and mineral phase changes by reaction bonding of SiC at 145$0^{\circ}C$. At the sintering temperature of 145$0^{\circ}C$, the additives such as B4C or Y2O3 did not improved porosity and bending strength. Added more than 1.5% of Y2O3, 0.5-0.3% of B4C, the formation of $\beta$-SiC was increased. At higher temperature above 145$0^{\circ}C$, it seems that the bodies added B4C, contained 3C form of SiC were denser than that of Y2O3 added. Because the transition of 3Clongrightarrow4Hlongrightarrow6H promoted sintering.