• Journal of Food Hygiene and Safety
• /
• v.7 no.1
• /
• pp.37-44
• /
• 1992

In order to observe the K contents, Korean common foods, especially processed foods were analyzed by Atomic Absorption Spectrophotometer. The results obtained were summarized as followed; (I) The K contents of instant noodle(ramyon) was 105-180 mg/100g and K ontents of their soup powder was 500-1000 mg/100g. (2) The K contents of potato products and bean products were less than those of original foods. So it was recongnized that the K contents might reduced during the food process. (3) The K contents of meats was 130-475 mg/I00g and those of meats products was relatively low, 80-260 mg/100g. (4) The K contents of carbonate beverage was very low but that of instant coffed was very high, 2400-2600 mg/100g. (5) There was no Statistical difference between the results of wet ash method and dry ash method in the K contents of all food groups.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.283-289
• /
• 2016

The nutritional compositions and physicochemical properties of two aronia varieties (Viking and Nero) cultivated in Chungbuk were investigated. The proximate compositions of Nero and Viking powder were:13% moisture, 0.58% and 0.6% ash, 0.73% and 0.33% crude lipid, 5.47% and 6.51% crude protein, 15.65% and 16.15% crude dietary fiber, and 64.36 and 64.43% crude carbohydrate, respectively. The proximate contents of the aronia samples were not significantly different. Among the physicochemical properties, there was also no significant change in total anthocyanin and antioxidant activity. However, Viking had higher total polyphenol contents and ${\alpha}$-glucosidase inhibition activity than Nero. The mineral contents of Al, Fe, Mn, Mg, Ca, Na, K, Cu and Zn in the two aronias were determined. Cu and Zn were not detected in both varieties. With regard to Al, Na and K, Nero was higher than Viking, while Ca was higher in Viking than Nero. From the results, Viking could be suggested to be beneficial for food processing.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.414-421
• /
• 1991

High-purity alumina powder was prepared by extracting the natural alumino-silicate mineral (halloysite) in H$_2$SO$_4$ solution. For the selective precipitation of alum and aluminum hydroxide, the solubility diagram was prior calculated by also considering the formation of hydroxides and carbonates for all the metal ions in an aqueous solution, which allow us to control the contamination of impurities envolved in the natural minerals. Ammonium aluminum sulfate (alum) and alumium hydroxide could be successfully prepared at pH = 1.5∼2.5 and pH = 6∼8, respectively according to our solubility diagrams. The purity of alum-and hydroxide-derived ${\alpha}-Al_2O_3$ was determined to be 99.7${\%}$ and 99.0${\%}$, respectively, which indicates the former route would be more desirable for the large scale application. It is also worthy to note that the impurities like Na and Si were strongly reduced in the former (Na = 0.05${\%}$, Si = 0.09${\%}$) compared to the latter (Na = 0.29${\%}$, Si = 0.12${\%}$).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.363-370
• /
• 2016

Lightweight geopolymers are more readily produced and give higher fire resistant performance than foam cement concrete. Lowering the density of solid geopolymers can be achieved by inducing chemical reactions that entrain gases to foam the geopolymer structure. This paper reports on the effects of adding different concentrations of aluminum powder on the properties of cellular structured geopolymers. The apparent density of lightweight geopolymers has a range from 0.7 to $1.2g/m^3$ with 0.025, 0.05 and 0.10 wt% of a foaming agent concentration, which corresponds to about 37~60 % of the apparent density, $1.96g/cm^3$, of solid geopolymers. The compressive strength of cellular structured geopolymers decreased to 6~18 % of the compressive strength, 45 MPa of solid geopolymers. The microstructure of geopolymers gel was equivalent for both solid and cellular structured geopolymers. The workability of geopolymers with polyprophylene fibers needs to be improved as in fiber-reinforced cement concrete. The lightweight geopolymers could be used as indoor wall tile or board due to fire resistance and incombustibility of geopolymers.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.377-398
• /
• 1993

A survey of infant practices was conducted to provide information on which to base planned nursing interventions. The subjects were a convenience sample of 168 mothers visiting out - patients departments of five general hospitals and one public health center in Seoul for immunizations or treatment for common colds for their infants from two to 12 months of age. Data collection was carried out from July 8th to September 30th, 1991 using a questionnaire of 84 questions, 31 on the type of feeding, 22 on supplementary feeding and 21 on demographic infer mation. The results are summarized as follows : 1) The type of feeding was primarily artificial feed-ing (63.1%), followed by mixed feeding (22%) and breast feeding (14.9%) of the 59 mothers expecting during pregnancy to breast feed, 54. 2% changed artificial feeding and 30.5% went on to breast feed as they had expected. For mothers expecting to continue breast feeding over seven months. only one infant was being breast fed for over seven months. 2) For the 106 mothers using artificial feeding, 70. 8% hed attempted breast feeding, 64% of them for less than a month. Breast milk had been suppressed by for medication (38.7%) : 34.9% had used no specia] means. 3) The major reasons for replacing breast feeding with artificial feeding were the infants' demand for more milk (47.2% ) and insufficient supply of breast milk (49.3％). 4) Most mixed feeding was started at the age of one to three months (59.5%). Only 34.4% gave an artificial feeding after breast feeding : most (46%) alternated breast feeding with artificial feeding. On the whole, the motive for mixed feeding was the lack of breast milk (70.3%). 5) Many mothers (81.8%) were adding vitamin or mineral supplements to artificial milk and 51.5% were adding something to faciliate digestion. As for the method of sterilizing milk bottles and nipples, 56% had sterilized them together in boiling water from the beginning : 27% were just washing the bottles after boiling only once initially when measuring artificial milk powder, 31. 5% of the mothers over filled the measuring spoon rather than to the level. 6) The mother's occupation was related to her way of feeding. Mothers at home full time did more breast feeding than mothers employed outside the home. (x²=5.72, p=〈0.05). 7) Most mothers began supplementary food, from three to four months (48.8%) : 11.2% began later than seven months. Supplementary food was given between milk feedings by 67.2% of the mothers : 19.2% gave it before a milk feeding. Some mothers(26.4%) made their own supplementary food : 19.2% used ready - made supplementary food products for convenience. Recommendations for nursing interventions included : 1. Prenatal education about the advantages of breast feeding and breast care, and home visits after delivery for counselling related to breast feeding. Correct preparation of artificial feeding methods need to be taught in both pre & postnatal periods. In addition, specific education about supplementary feeding needed. 2. Further research is indicated about the Perceived lack of supply of breast milk and about the effectiveness of nursing interventions to Promote breast feeding.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.70-76
• /
• 1988

Since ancient times, records pertaining to chi-reinforecenent of ginseng have been documented in books of Chinese nedicine. We, therefore, assessed the therapeutic effects of ginseng on patients with chi-deficiency syndrome. Eigheen cases of chi-deficiency, screened at the outpatient service in the internal department of Chinse medicine at the China Medical College Hospital. were prescribed two grams of Korean red ginseng powder three times daily for a two week period. For evaluation, a questionnaire and diagnosis by sphygmography were conducted prior to and after administration of the prescription. For control purposes, fourteen volunteers fasted for more than five days (seven had access only to ginseng. and the other seven were given only mineral water) and were subsequently evaluated by the same criteria. Three results were obtained for the ginseng treated group: (1) improvements in symptoms of chi-deficiency such as fatigue and dizziness; (2) changes in pulse waves with time domains showing alternate P-waves, strengthened dicrotic waves, and some minute waves in the end-diastolic period; (3) frequency domains with enhanced amplitudes around 12Hz. These three findings, which are consistent with each other, suggest the reinforcement of the effect of ginseng on 'heart-spleen chi' in Chinese medicine.

• Economic and Environmental Geology
• /
• v.31 no.2
• /
• pp.111-125
• /
• 1998

Dispersion, migration and enrichment of environmental toxic elements from the Samkwang Au-Ag mine area were investigated based upon major, minor and rare earth element geochemistry. The Samkwang mine area composed mainly of Precambrian granitic gneiss. The mine had been mined for gold and silver, but closed in 1996. According to the X-ray powder diffraction, mineral composition of stream sediments and soils were partly variable mineralogy, which are composed of quartz, orthoclase, plagioclase, amphibole, muscovite, biotite and chlorite, respectively. Major element variations of the host granitic gneiss, stream sediments and soils of mining and non-mining drainage, indicate that those compositions are decrese $Al_2O_3$, $Fe_2O_3$, MgO, $TiO_2$, $P_2O_5$ and LOI with increasing $SiO_2$ respectively. Average compositional ranges (ppm) of minor and/or environmental toxic elements within those samples are revealed as As=<2-4500, Cd=<1-24, Cu=6-117, Sb=1-29, Pb=17-1377 and Zn=32-938, which are extremely high concentrations of sediments from the mining drainage (As=2006, Cd=l1, Cu=71, Pb=587 and Zn=481 ppm, respectively) than concentrations of the other samples and host granitic gneiss. Major elements (average enrichment index=6.53) in all samples are mostly enriched, excepting $SiO_2$, $Na_2O$ and $K_2O$, normalized by composition of host granitic gneiss. Rare earth element (average enrichment index=2.34) are enriched with the sediments from the mining drainage. Minor and/or environmental toxic elements within all samples on the basis of host rock were strongly enriched of all elements (especially As, Br, Cu, Pb and Zn), excepting Ba, Cr, Rb and Sr. Average enrichment index of trace elements in all samples is 15.55 (sediments of mining drainage=37.33). Potentially toxic elements (As, Cd, Cr, Cu, Ni, Pb, and Zn) of the samples revealed that average enrichment index is 46.10 (sediments of mining drainage=80.20, sediments of nonmining drainage=5.35, sediments of confluent drainage=20.22, subsurface soils of mining drainage=7.97 and subsurface soils of non-mining drainage=4.15). Sediments and soils of highly concentrated toxic elements are contained some pyrite, arsenopyrite, sphalerite, galena and goethite.

• Resources Recycling
• /
• v.16 no.4
• /
• pp.17-26
• /
• 2007

Inorganic shell powder waste was added to recycled polypropylene(COPP), and its effect on the mechanical properties and flammability was investigated. Compatibilizer(Polytail H) was added to improve mechanical properties of COPP/shell composites. Also three different flame retardants($Al_2O_3$, DBDPO, $Sb_2O_3$) were added to improve flammability. Experimental results indicated that addition of compatibilizer resulted in an improved mechanical properties, and especially impact strength approached that of 100 wt% COPP. Addition of flame retardant did not result in decreased mechanical properties. UL-94 flammability test indicated that COPP/shell composite did not show good flame retardancy, however, in the case of COPP/shell composites containing flame retardant showed good flammability. flammability was found $Sb_2O_3>Al_2O_3>DBDPO$ in this order. Finally, UL-94 V-0 grade was found in COPP/shell composite with $Al_2O_3$, compatibilizer, and 40 wt% shell, and COPP/shell composites with $Sb_2O_3$.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.359-385
• /
• 2005

Red ocher, red lead or cinnabar has been as red colorant for ages. Cinnabar of the red pigments has been highly regarded as a valuable ingredient because it represent a symbol of exorcising and a haute image. It was used as a pigment of painting and mural painting, bowl, clothes, rock writing, gravestone, etc. It is powder which dissolves in perilla oil or glue before using. Because it is high-priced, the use of cinnabar may be limited to the privileged class. Therefore, red ocher or red lead was used instead of cinnabar. "Gongsagyunmunrok" demonstrated that government official's gravestonea has been painted red by two colorants in the period of the Goryeo dynasty. However, cinnabar may be used to paint gravestones for the first time in the period of the Three States because it has been transmitted since the times. This study discuss the results obtained from an analysis of the pigments used on the red pigments of the Stone Monuments. The results can be briefly summarized as below; First, the microcrystalline structures seen on the surface section of analyzed pigments, samples of which were taken from various parts of red pigments show that different sizes and shapes of pigment particle. Second, a result of the analysis on the composition and structure of the pigments shows that the main components in their composition are : Red pigments - Red lead($Pb_3O_4$), Cinnabar(HgS) and Hematite($Fe_2O_3$) White pigments - Calcite($CaCO_3$) Especially, we knew that red Stone Monuments were found to be natural mineral pigments, which were used as a singular or a mixture.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.609-615
• /
• 2021

The aim of the present study was to investigate the mechanical properties of melt-injected poly lactic acid (PLA) composites with β-tricalcium phosphate (β-TCP). The PLA mixed with calcined PLA/β-TCP powder to be contents of 0, 10, 30, 50 wt%, respectively, was dissolved in chloroform solvent under stirring for 24 h. Then the liquid mixtures were dropped into ethanol to extract solvent. After drying, the well-dispersed PLA/β-TCP composites were granulated and melt-injected to prepare specimens for various mechanical testing. PLA/β-TCP induced the precipitation of an apatite bone-mineral phase on the surface after immersion in a human simulated body fluid (SBF) for 90 days, showing in bioactivity. Mean various mechanical properties PLA/β-TCP composite were increased up to 10-30 wt% with significantly in part and composite were decreased 50 wt% of showing in mechanical properties. In conclusion, Over 30 wt% addition of β-TCP to PLA may be not advisable to improve the mechanical properties of melt-injected polymeric composites. Results indicated that β-TCP can be used considered as potential reinforcing agent for increasing mechanical properties for PLA. Therefore, it was suggest that the additional effects of β-TCP and research on a wide range of substances.