• Journal of Bio-Environment Control
• /
• v.3 no.1
• /
• pp.66-71
• /
• 1994

In order to understand the mechanism of the wide occurrence of tipburn phenomenon in Chinese cabbage grown under protected cultivation, Chinese cabbage cultivated in two experimental plots was analyzed based on the distribution of some mineral elements by region in the plant and in the soil. The following results were obtained : 1) The occurrence of tipburn is not related to the concentration of Ca in the soil. 2) The concentration of Ca by region in the plant increased in the order such as inner leaf < middle leaf < outer leaf and inner vein < middle vein < outer vein. 3) From this results the cause of occurrence of tipburn phenomenon in Chinese cabbage which occurred at fixed times in the growth and development of the plant can be controlled by modifying environmental factors in order to prevent excessive transpiration in the inner leaf.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.525-530
• /
• 2004

Three dimensional finite element models of lumbar interbody fusion using rage and screws were constructed for the simulation of stress distribution and maximum displacement. It is also performed to investigate the efforts of osteoporosis and the location of cage on the stress distribution. It is known from the results that the increase of the strength of trabecular bone causes to decrease the stress of cortical bone and to increase the stress of trabecular bone. And it is found that the trend of stress distribution is changed by the change of location of cage and proper location of cage enhances the rate of operational success.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.253-260
• /
• 2021

The implementation of subsea separation and liquid boosting is becoming a common development scheme for the exploration of deep water fields. Subsea separation is an attractive and economic solution to develop deep offshore fields producing fluid without hydrate or wax. A subsea separator can avoid or simplifying costly surface platforms of floating vessels, as well as being an efficient tool to enhance hydrocarbon production. Subsea separation system should be reliable to ensure successful operation in a wide range of 3-phase flow regime. In this study, multiphase flow characteristics inside in-line type subsea separation system are investigated for the design of subsea separation system.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.289-309
• /
• 1993

Milyang pyrophyllite deposit which was formed by hydrothermal alteration occurs in Late Cretaceous andesitic tuff in the Milyang area, Gyeongsangnamdo. The wall rock alteration and genesis of the Milyang pyrophyllite deposit were studied. The ore minerals are composed dominantly of pyrophyllite accompanied by small amounts of quartz, kaolinite, pyrite, dumortierite and diaspore. The alteration halo of this deposit can be divided into three zones on the basis of mineral assemblage; pyrophyllite, sericite and chlorite zone. The common mineral assemblages of each alteration zone are as follows: (1) pyrophyllite zone; pyrophyllite-quartz-kaolinite-pyrite-dumortierite-diaspore, (2) sericite zone; sericite-quartz-pyrite-kaolinite, and (3) chlorite zone; chlorite-plagioclase-quartz. Major element chemistry shows that characteristic depletion in MgO, CaO, and $Na_2O$ and relative increase in FeO from less altered chlorite zone to extensively altered pyrophyllite zone corresponding to variation in mineral assemblages. The paragenesis of ore minerals, oxygen isotope data, chlorite and illite geothermometry suggest that ore deposit was formed at about $250{\sim}330^{\circ}C$. Both hydrogen and silica activities are high in pyrophyllite zone. Potassium activity increases in sericite zone while hydrogen activity becomes low in chlorite zone. The pyrophyllite zone was formed relatively higher temperature than those of sericite and chlorite zones. The ore fluid was considered to be magmatic water in origin derived from the residual granitic magma which interacted with meteoric water.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.63-69
• /
• 2006

When rocks are exposed to the near surface environment, they are broken down due to several factors such as physical and chemical weathering during the geologic time. The feldspar and mica, which are the main rock-forming minerals, are easily broken down relative to other minerals. In order to reproduce some weathered minerals similar to the ones exist in natural weathered granite, there was an experimental interaction between fresh minerals and acidic solution. In low pH condition, biotite initially dissolved and its surface structure broke down, whereas plagioclase dissolved and had a needle-shaped dissolved morphology with some precipitates composed of Al element. The minerals were deeply dissolved in a strong acid condition, showing the prominent dissolved structure. Some etch pits and dissolved textures developed on the natural mineral surfaces are similarly found in our experiment, suggesting the development of mineral dissolution and weathering texture by the influence of the mineral's intrinsic nature.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.4
• /
• pp.431-439
• /
• 2012

A column chemistry is the most useful tools for isolating the elements of interest in isotope geochemistry. Here we introduce the chemical experimental procedure for Sm, Nd, La and Ce separation such as Teflon powder or Ln-resin method using HDEHP of KIGAM, KBSI, KOPRI and ${\alpha}$-HIBA(${\alpha}$-Hydroxy Isobutyric acid) method of Nagoya University, Japan. This technical report will provide an useful information in selecting the experiment method for rare earth element isotope system study such as Sm-Nd and La-Ce isotope system.

• Journal of the Korean earth science society
• /
• v.26 no.8
• /
• pp.809-820
• /
• 2005

The fluvial sequence developed along the channel margin of meander bends in the midstream of the Yeongsan River consists of channel deposits at the bottom and overbank deposits at the top, and shows a fining-upward trend. The fluvial deposits consist of 7 sedimentary facies, and facies association forms 7 architectural elements. The channel deposits formed as channel bar or point bar. The channel bar deposits consisted of architectural element of gravel bedform were formed by channel lag deposits within the channel; whereas, the channel bar deposits consisted of architectural elements of downcurrent-dipping inclined strata sets, cross-stratified and horizontally stratified sets, and horizontally stratified sets were formed by downstream migration of sand wave or downstream transport of sand by traction current in the upper flow regime conditions within the channel. The point bar deposits consist of architectural elements of down current-dipping inclined strata sets, horizontally stratified sets, cross-stratified and horizontally stratified sets, and laterally inclined and horizontally stratified sets. These architectural elements are thought to have been formed by the combined effects of the migration of sand dunes and the formation of horizontal lamination in the upper flow regime plane bed conditions. The overbank deposits consist of the architectural elements of overbank fine and sand sheet and lens. The overbank fines were formed by settling of mud from slackwater during flooding over floodplain whereas the sand sheet and lens were formed by traction of sands introduced episodically fiom channel to the overbank during flooding.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.39-49
• /
• 2022

Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO₄, and NO₃, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.67-83
• /
• 2008

The sericite ore deposits formed in the Precambrian granitic rock at the Bonghwa area, Kyungsangbuk-do, South Korea. The geochemical and mineralogical characteristics of sericite occurred in Daehyun and Seonghwang mine were analyzed using petrographic microscope, XRD, EPMA, XRF and ICP. An alteration mechanism was also studied. Sericitization occurred within the granitic rock by hydrothermal alteration. From the careful study on the occurrence and mineral assemblage, four alteration zone were clearly identified. These zones reflect progressive hydrothermal alteration process. All sericites belong to $2M_1$ polytype and their mineralogical and geochemical properties are close to illite. The sericite ores show various colors, but the characteristics of major element compositions and crystal structures are not different. The trace element analysis, however, indicates that the difference in color attribute to the abundance of Cr and Ti: bluish green colored sericite are enriched in Cr and blackish green colored sericite enriched in Ti. The formation of sericite ore deposit in the granitic rocks are closely relate to fracture system such as fault and joint. It is considered that the sericite ore deposits in this area were formed by very simple hydrothermal alteration occurred along the fracture zones in granitic rocks with absence of other hydrothermally altered minerals such as kaolin and pyrophyllite.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.138-146
• /
• 2007

This paper describes 2.5D induced polarization (IP) modeling and inversion algorithms using complex resistivity. The complex resistivity method has merits for acquiring more valuable information about hydraulic parameters and pore fluid than the conventional IP methods. The IP modeling and inversion algorithms are developed by allowing complex arithmetic in existing DC modeling and inversion algorithms. The IP modeling and inversion algorithms use a 2.5D DC finite-element algorithm and a damped least-squares method with smoothness constraints, respectively. The accuracy of the IP modeling algorithm is verified by comparing its responses of two synthetic models with two different approaches: linear filtering for a three-layer model and an integral equation method for a 3D model. Results from these methods are well matched to each other. The inversion algorithm is validated by a synthetic example which has two anomalous bodies, one is more conductive but non-polarizable than the background, and the other is polarizable but has the same resistivity as the background. From the inverted section, we can cleary identify each anomalous body with different locations. Furthermore, in order to verify its efficiency to the real filed example, we apply the inversion algorithm to another three-layer model which includes phase anomaly in the second layer.