• 공업화학
• /
• 제28권5호
• /
• pp.571-575
• /
• 2017

본 연구에서는 초음파 조사법을 사용하여 cadmium telluride (CdTe) 양자점을 합성하였다. 전구체의 비율과 합성 시간을 주 변수로 하여 그에 따른 CdTe 양자점의 광학적 특성과 구조적 특성을 분석하였다. 모든 cadmium (Cd)과 tellurium(Te) 함량비율의 실험에서 합성 시간이 증가함에 따라 CdTe 양자점의 성장에 의해 밴드갭 감소현상이 관찰되었고, 발광 특성을 확인한 결과 510~610 nm 파장 범위에서 장파장으로 이동함을 보였다. 또한 Te의 비율이 증가함에 따라 장파장이동이 빠르게 일어나는 것을 확인하였다. Photoluminescence (PL) 피크 강도를 확인하였을 때 합성시간이 180 min~240 min 사이에서 가장 높은 강도를 보였다. X-ray diffraction (XRD)와 transmission electron microscopy (TEM)으로 구조적 특성을 확인한 결과 zinc blend 구조의 CdTe 양자점을 나타내었으며, 합성시간이 210 min일 때 양자점의 크기는 약 2.5 nm로 균일하게 분산되어 있었으며 fast fourier transform (FFT) 이미지를 확인한 결과 뚜렷한 결정성을 확인하였다.

• 한방재활의학과학회지
• /
• 제21권2호
• /
• pp.63-85
• /
• 2011

Objectives : This study was carried out to know the effects of Danggwisayeokgaohsuyusaenggang-tang(hereinafter referred to DST) on arthritis induced by collagen on DBA/1 OlaHsd mice. Methods : For this purpose, DST was orally administered to mouse with arthritis induced by collagen II. Cytotoxicity, high performance liquid chromatograph(HPLC) analysis, arthritis index, value of immunocyte in draining lymph node and paw joint, cytokine were measured in vivo. Results : 1. The cytotoxicity against human fibroblast cells(hFCs) was not measured in any concentration. 2. In HPLC analysis, There are high peak patterns at 8 minute(min), 12 min, 35 min, 45 min. 3. The arthritis index was decreased significantly. 4. The degree of arthritis induced damage of joint of DST group is slight compared with control group in histopathologic observation(Hematoxylin and eosin stain(H&E), Masson's trichrome(M-T) staining). 5. In total cell counts of draining lymph node(DLN) and paw joint, the cells in DLN decreased significantly on DST 200 mg/kg and the cells in paw joint decreased significantly on 200 mg/kg and 50 mg/kg. 6. In DLN, $CD4^+/CD25^+$, $CD3^+/CD69^+$, major histocompatibility complex(MHC), class-II/$CD11c^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg $CD3^+/CD8^+$ cells decreased significantly on DST 200 200 mg/kg, $CD4^+$, $CD3^+/CD44^+$ cells decreased. 7. In paw joints, $CD4^+$, $CD11b^+/Gr-1^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg. 8. In joints, levels of $IL-1{\beta}$, IL-6, $TNF-{\alpha}$, cyclo-oxygenase-2(COX-2), NOS-II were decreased on DST 200 mg/kg and DST 50 mg/kg. 9. In analysing of cytokine in CD3/CD28 activated spleen, IL-17 was decreased significantly, IL-4 was increased significantly $INF-{\gamma}$ was decreased on DST 200 mg/kg. 10. In analysing of cytokine in collagen activated spleen, IL-17 were decreased significantly, IL-4 was increased significantly. Conclusions : This results demonstrated that DST suppressed the inflammatory progression of collagen-induced arthritis(CIA) mice and supported further studies are required to survey continuously in looking for the effective substance and mechanism in the future.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.152-156
• /
• 2014

We report hybrid solar cells fabricated with polymer/fullerene bulk heterojunction layers that contain inorganic nanocrystals synthesized by in-situ reaction in the presence of polymer chains. The inorganic (cadmium sulfide) nanocrystal ($CdS_{NC}$) was generated by the reaction of cadmium acetate and sulfur by varying the reaction time up to 30 min. The synthesized $CdS_{NC}$ showed a rectangular flake shape, while the size of $CdS_{NC}$ reached ca. 150 nm when the reaction time was 10 min. The performance of hybrid solar cells with $CdS_{NC}$ synthesized for 10 min was better than that of a control device, whereas poor performances were measured for other hybrid solar cells with $CdS_{NC}$ synthesized for more than 10 min.

• 한국식품저장유통학회지
• /
• 제12권3호
• /
• pp.209-215
• /
• 2005

둥굴레 근경의 증자 및 열처리 중 수용성 고형분 및 Pb, Cd 제거율의 변화를 확인하기 위하여 반응표면분석(RSM)을 활용하였다. 중심합성계획법에 따라 증자시간($60{\sim}180$ min), 볶음온도($110{\sim}150^{\circ}C$) 및 볶음시간($10{\sim}50$ min)을 달리하여 16구간으로 제조된 시료의 수용성 고형분 함량, Pb 및 Cd 제거율을 측정하고 회귀분석을 실시하였다. 예측된 가용성 고형분의 최대값은 $71.47\%$ 이었으며, 이때의 증자 및 볶음조건은 증자시간 65.24분, 볶음온도 $126.93^{\circ}C$ 및 볶음시간 37.58분 이었다. 둥굴레 시료의 Pb 제거율은 증자시간 71.23분, 볶음온도 $119.81^{\circ}C$ 및 볶음시간 24.35분일 때 최대값 $18.87\%$이었으며, Cd 제거율은 증자시간 160.89분, 볶음온도 $126.43^{\circ}C$ 및 볶음시간 15.81분일 때 최대값 $50.85\%$로 예측되었다. 중금속 제거율을 고려한 둥굴레차의 품질특성을 극대화시킬 수 있는 증자 및 볶음조건은 증자시간 $165{\sim}180$분, 볶음온도 $120{\sim}135^{\circ}C$ 및 볶음시간 $30{\sim}45$분 범위로 예측되었다. 이상의 예측범위 내의 임의의 점에서 실제 실험한 실험치는 반응표면분석법에 의해 예측된 값과 유사한 경향을 보여 도출된 회귀식의 신뢰성을 검증할 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제1권1호
• /
• pp.26-34
• /
• 1988

Sintered CdS/CdTe solar cells have been farbricated by coating a (Cd+Te) slurry on sintered CdS films followed by the sintering at 625.deg.C for one hour with various heating rates. When cadmium and tellurinm powders are used instead of CdTe powder to form CdS/CdTe junction, CdTe is formed in the temperature range of 290.deg.C-400.deg.C. The microstructure of the CdTe films depends strongly on the heating rate of the sintering due to the low melting temperature and the high vapor pressure of the elemental Cd and Te. An optimum heating rate obtain CdTe films with uniform and dense microstructure which, in turn, improves the efficiency of the sintered CdS/CdTe solar cells. All-polycrystalline CdS/CdTe solar cells with an efficiency of 9.57% under 50mW/cm$^{2}$ tungsten light have been farbricated by using a heating rate of 14.deg.C/min.

• Food Science and Biotechnology
• /
• 제14권6호
• /
• pp.793-797
• /
• 2005

Optimum conditions for cholesterol removal in egg yolk were evaluated based on ratio of egg yolk-to-water, crosslinked ${\beta}$-cyclodextrin (${\beta}$-CD) concentration, and mixing temperature, time, and speed by adding crosslinked ${\beta}$-CD treated with adipic acid. Cholesterol removal in egg yolk-water mixture increased with increasing ${\beta}$-CD level (10-25%). About 95% was removed by 25% ${\beta}$-CD at 1:1 ratio of egg yolk-to-water and 800 rpm mixing at $40^{\circ}C$ for 30 min. In recycling study, removal rates were measured using ten times recycled crosslinked ${\beta}$-CD in egg yolk, and 85% cholesterol removal was observed with eight times reuse. These results indicated that over 90% cholesterol was removed at 1:1 ratio of egg yolk-to-water, 20% crosslinked ${\beta}$-CD addition, and 30 min mixing with 600 rpm at $40^{\circ}C$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.326-332
• /
• 2008

In this work CdS films were prepared by using chemical bath deposition, which is simple and inexpensive technique suitable for large deposition area. Annealing in air at different temperatures (300, 350, 400, 450 and $500^{\circ}C$) at constant time of 30 min, also for different times (15, 30, 45, 60 and 90 min) at constant temperature ($300^{\circ}C$) is achieved. X-Ray analysis has confirmed the formation of cadmium oxide (CdO) with slight increase in grain size, shift towards lower scattering angle due to relaxation in the tensile strain for deposition films, and structure change from cubic and hexagonal to the hexagonal. From electrical properties, significant increase in electrical conductivity appeared in samples annealed at $300^{\circ}C$ for 60 min, and at $350^{\circ}C$ for 30 min.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.470-470
• /
• 2011

반도체 집적회로의 고집적화 및 고성능화를 위한 기본 소자(MOSFET)의 미세화 및 단위공정의 물리적 한계를 극복하기 위한 다양한 연구가 진행되고 있다. 그 중 다양한 나노입자를 이용한 나노소자 제작 연구가 활발하게 이루어지고 있다. 하지만 이러한 나노입자를 이용한 나노소자의 제작에 있어서 원하는 위치의 나노입자의 배열과 정렬의 어려움을 겪고 있다. 이를 위해서 본 연구에서는 자기조립특성을 가지는 DNA 분자와 CdSe/ZnS 나노입자들의 표면 기능화를 통해서 상호 결합시키는 실험을 하였다. DNA 분자를 형틀로 이용하여 CdSe/ZnS 나노입자를 선택적 배열하고 전자 소자화하기 위해서는 CdSe/ZnS 나노입자의 표면 기능화가 필수적이다. 이를 위하여 무극성인 CdSe/ZnS 나노입자들과 DNA 분자의 phosphate backbone의 음전하와의 경합 특성을 향상시키기 위하여 이들 나노입자의 표면을 양전하로 치환하는 실험을 수행하였다. Core 나노입자인 CdSe 나노입자를 제작한 다음에 CdSe 보다 높은 band gap을 가지고 lattice mismatch가 적은 ZnS 로 shell 층을 형성하는 2-step 방법을 이용하여 합성한 CdSe/ZnS 나노입자를 무극성 용매인 chloroform 용액 0.5 ml에 분산시키고 DMAET 0.3 ml 와 Methanol 0.1 mg/ml를 이용하여 리간드들을 바꿔주고 과잉된 리간드인 DMAET를 제거하기 위해 Methanol로 3차례 세척한 다음 증류수에 용해시키는 실험을 하였다. 나노입자 기능화 과정 이후 기능화 여부를 판단하기 위하여 FT-IR spectroscopy 와 zeta potential 측정을 통하여 나노입자 표면의 변화와 전위를 측정하였다.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.351-367
• /
• 1996

In the field Of individual identification in forensic Science, if the body is charred, it is sometimes impossible to identify the morphologic changes and charred tissue such as blood, muscle and bone can not be identified by forensic microbiologic method such as DNA typing. So the author used the characteristics of teeth which is relatively firm compare to other organs and stable to external environment such as heat and also possess cells needed for the DNA typing. The author conducted the experiment on teeth to detect DNA related to individual identification regarding to temperature in which other charredorgans can not be detected. The experiment was done on 64 extracted third molars consisted of unheated ones, and heated teeth to $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$ for 45 min, 90 min, and 120 min respectively and to $250^{\circ}C$ for 45 min. DNA was extracted from each tooth and amplified fragment length polymorphism procedure(AMP-FLPs) using polymerase chain reaction(PCR) was applied and observed for the matching DNA in HumTH01 and HumCD4 locus and the followings Are the results : 1. It was able to detect matching DNA in HumTH01 and HumCD4 locus in every teeth which no heating has been done. 2. It was able to detect matching DNA in HumTH01 and HumCD4 locus in every teeth heated to $100^{\circ}C$ for 45, 90 and 120 min. 3. It was able to detect matching DNA in HumTH01 and HumCD4 locus in teeth heated to $l00^{\circ}C$, $200^{\circ}C$ for 45, 90, 120 min. 4. It was impossible to detect matching DNA in HumTH01 and HumCD4 locus in teeth heated to $250^{\circ}C$. So, it is possible to extract DNA from teeth that otherwise can not be extracted from other organs in the charred body and it can be concluded that teeth are highly reliable and applicatable as forensic odontology for individual identification.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.81-81
• /
• 2005