• ETRI Journal
• /
• v.33 no.4
• /
• pp.487-496
• /
• 2011

Korea Multi-Purpose Satellite-5 (KOMPSAT-5) is the first satellite in Korea that provides 1 m resolution synthetic aperture radar (SAR) images. Precise orbit determination (POD) using a dual-frequency IGOR receiver data is performed to conduct high-resolution SAR images. We suggest orbit determination strategies based on a differential GPS technique. Double-differenced phase observations are sampled every 30 seconds. A dynamic model approach using an estimation of general empirical acceleration every 6 minutes through a batch least-squares estimator is applied. The orbit accuracy is validated using real data from GRACE and KOMPSAT-2 as well as simulated KOMPSAT-5 data. The POD results using GRACE satellite are adjusted through satellite laser ranging data and compared with publicly available reference orbit data. Operational orbit determination satisfies 5 m root sum square (RSS) in one sigma, and POD meets the orbit accuracy requirements of less than 20 cm and 0.003 cm/s RSS in position and velocity, respectively.

• Animal cells and systems
• /
• v.4 no.1
• /
• pp.23-30
• /
• 2000

Horizontal starch gel electrophoresis for 29 populations (n=543) of the wrinkled frog, Rana rugosa, from Korea and Japan was peformed to assess the degree of genic variation and genetic diversity, and to understand the biogeographic pattern of distribution and speciation. A sum of 22 presumptive loci was screened from 17 enzymes and general proteins. Four loci, Aco, Est-3, Me-2, and Pgm, demonstrated high levels of polymorphism. The degree of average genetic variation of R. rugosa was P=22.7% (9.1-40.9%), Ho=0.086 (0.048-0.165) and He=0.090 (0.042-0.168). In the south-eastern region of the Korean peninsula (Chongsong, Yongchon, Ulsan, Kyongju, Pohang, yongdok and Ulchin), a few unique alleles in the Mpi locus were detected and their biogeographic implications were considered. The degree of genetic differentiation among the Korean populations was moderate (S=0.900), whereas the degree of genetic diversity between Korean and Japanese populations was notably high (S=0.687, D=0.293). This result corresponds with the data obtained by the mitochondrial cytochrome b gene sequence (Lee et al., 1999) suggesting that the Korean and Japanese R. rugosa might have evolved a specific level of genetic differentiation since their geographic isolation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.1-8
• /
• 2009

The proposed real-time structural health monitoring(SHM) system in past transferred and received data, central server gathered data from sensors, through coaxial cable. an immense sum of money is required to structure sensor network using coaxial cable. This paper proposes USN-based structural health monitoring(SHM). AIso, this paper designs and realizes prototypes according to proposed SHM. The value of sensing data obtained through HSDPA transfer to the BMS(Bridge Monitoring Server) passing through the TCP / IP socket by building two-way communication system, We have implemented a complete graph converting full system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3C
• /
• pp.287-294
• /
• 2010

MB-OFDM UWB system will adopt LDPC codes to enhance the decoding performance with higher data rates. In this paper, we will consider algorithm and architecture of the LDPC codes in MB-OFDM UWB system. To suggest the hardware efficient LDPC decoder architecture, LLR(log-likelihood-ration) calculation algorithms and check node update algorithms are analyzed. And we proposed the architecture of LDPC decoder for the high throughput application of Wimedia UWB. We estimated the feasibility of the proposed architecture by implementation in a FPGA. The implementation results show our architecture attains higher throughput than other result of QC-LDPC case. Using this architecture, we can implement LDPC decoder for high throughput transmission, but it is 0.2dB inferior to the BP algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.432-438
• /
• 2011

This paper describes an analysis of optimal design conditions of multi-mode LDPC(low density parity check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3, 3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder, which adopts min-sum algorithm and layered decoding scheme, is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, integer/fractional part bit-widths, optimal design conditions and decoding performance of LDPC decoder are analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.85-88
• /
• 2012

DSCs are based on a dye-adsorbed porous $TiO_2$ layer as a photo electrode [1]. Under the illumination, dye molecules are excited and electrons are produced. The injected electrons in the conduction band of $TiO_2$ may recombine with the electrolyte. To obtain high performance DSCs, it is essential to retard the recombination. The charge recombination can be reduced by forming core-shell structure. In this work, we investigated the core-shell structure with $Al_2O_3$ and MgO coating layer on the porous $TiO_2$ layer. We confirmed the photovoltaic properties by I-V characteristics. The current and the efficiency was improved. In addition to, Through decrease in the width of EIS arc, which is the sum of the interfacial charge transfer resistances of both electrodes, we can be indicated that the block effect.

• Journal of the Korean Society of Visualization
• /
• v.6 no.1
• /
• pp.41-46
• /
• 2008

In this paper, the recirculation flow motion and mixing characteristics driven by air bubble stream in a rectangular water tank is studied. The time-resolved PIV technique is adopted for the quantitative visualization and analysis. 488 nm Ar-ion CW laser is used for illumination and orange fluorescent ($\lambda_{ex}=540nm,\;\lambda_{em}=560nm$) particle images are acquired by a PCO 10bit high-speed CCD camera (1280$\times$1024). To obtain clean particle images, 545 nm long pass optical filter and an image intensifier are employed and the flow rates of compressed air is 3 l/min at 0.5 MPa. The recirculation and mixing flow field is further investigated by time-resolved POD analysis technique. It is observed that the large scale recirculation resulting from the interaction between rising bubble stream and side wall is the most dominant flow structure and there are small scale vortex structures moving along with large scale recirculation flow. It is also verified that the sum of 20 modes of velocity field has about 67.4% of total turbulent energy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.337-343
• /
• 2011

A particular empirical equation for rainfall kinetic energy is needed to compute rainfall erosivity, calculated by the annual sum of the product of total rainfall energy and maximum 30-min rainfall intensity. If rainfall kinetic energy equation was different, rainfall erosivity will be produced differently. However, the previous studies in Korea had little concern about rainfall kinetic energy equation and it was not clear which rainfall kinetic energy is suitable for Korea. The purpose of this study is to analyze and evaluate the difference of the rainfall erosivity based on different rainfall kinetic energy equations obtained from previous studies. This study introduced new rainfall erosivity factors based on rainfall kinetic energy equation of Noe and Kwon (1984) that is only regression model developed in Korea. Data of annual rainfall erosivity for 21 weather stations in 1980~1999 were used in this study. The result showed that rainfall erosivity factors by the previous equations had been about 10~20% overestimated than rainfall erosivity by Noe and Kwon (1984)'s equation in Korea.

• Asia-Pacific Journal of Business
• /
• v.9 no.4
• /
• pp.99-117
• /
• 2018

This study has investigated Linear Programming (LP) applications to special decision making problems in managerial accounting with the help of spreadsheet Solver tools. It uses scenario approaches to case examples having three products and three resources in make-and-supply business operations, which is applicable to cases having more variables and constraints. Integer Programmings (IP) are applied in order to model situations when products are better valued in integer values or logical constraints are required. Three cases in one-time-only special order decisions include Goal Programming approach, Knapsack problems with 0/1 selections, and fixed-charge 0/1 integer modelling techniques for set-up operation costs. For the decisions in outsourcing problems, opportunity-costs of resources expressed by shadow-prices are considered to determine their precise contributions. It has also shown that the improvement in work-shop operation for an unprofitable product must overcome its 'reduced cost' by the sum of direct manufacturing cost savings and its shadow-price contributions. This paper has demonstrated how various real situations of special decision problem in managerial accounting can be approached without mistakes by using LP's and IP's, and how students both in accounting and management science can acquire LP skills in their education.

• Journal of information and communication convergence engineering
• /
• v.17 no.1
• /
• pp.60-66
• /
• 2019

In this paper, we propose a new free-view three-dimensional (3D) computational reconstruction of integral imaging to improve the visual quality of reconstructed 3D images when low-resolution elemental images are used. In a conventional free-view reconstruction, the visual quality of the reconstructed 3D images is insufficient to provide 3D information to applications because of the shift and sum process. In addition, its processing speed is slow. To solve these problems, our proposed method uses a pixel rearrangement technique (PERT) with locally selective elemental images. In general, PERT can reconstruct 3D images with a high visual quality at a fast processing speed. However, PERT cannot provide a free-view reconstruction. Therefore, using our proposed method, free-view reconstructed 3D images with high visual qualities can be generated when low-resolution elemental images are used. To show the feasibility of our proposed method, we applied it to optical experiments.