• Journal of Chest Surgery
• /
• v.26 no.2
• /
• pp.148-153
• /
• 1993

To compare two methods of mammary pedicle graft preparations with free internal mammary artery flow, we studied 31 patients who had the left internal mammary artery harvested for coronary artery bypass grafting. The free flow was measured at the transected opening of 2 to 3 cm distal to the point of bifurcation on mean arterial pressure of 50 to 55 mmHg during cardiopulmonary bypass. Group I comprised 14 patients, whose grafts were sprayed and wrapped in sponges soaked in diluted papaverine solution (60 mg in 40 ml Hartmann's solution). An average 80 minutes after the preparations, free flow of the internal mammary artery ranged from 20 to 80 ml/min (mean 37.7 ml/min). Group II comprised 17 patients, who had internal mammary artery takedown under the exact conditions used in group I. The grafts were sprayed and wrapped in sponges soaked in the diluted papaverine solution as in group I. After an average of 28 minutes, free flow ranged from 8 to 28 ml/min (mean 17.6 ml/min). Intraluminal papaverine of the same dilution was then injected without any hydrostatic dilatation and flows increased upto 37 to 150 ml/min (mean 74.7 ml/min). This study shows that intraluminal papaverine preparation method markedly increases free mammary artery flow which is inadequate with external papaverine preparation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.745-750
• /
• 2002

The effects of recording interval (1, 2, 3, 4, 5, 10, 15, 20 and 30 min) on the estimation of some grazing behavior variables in beef cows and calves (<4 months old) were investigated in a daytime grazing (7 h) system utilizing a bahiagrass (Paspalum notatum Flugge) pasture (a 1.1 ha paddock and a 0.4 ha resting area). Recording intervals of 10-30 min tended to underestimate the time spent grazing and ruminating and overestimate the time spent resting by animals, whereas intervals of 1-5 min resulted in almost constant estimates. In all grazing activities, the errors of estimation became larger when the recording interval exceeded 5 min. The accuracy of estimation was higher for grazing time>rumination time>resting time. An increase in recording interval always decreased estimates of the distance walked by animals. It was concluded that recording intervals of 1-5 min provide reliable estimates of the time spent grazing, ruminating and resting. It was also concluded that positioning of animals at 1 min intervals may provide estimates of walking distance with acceptable bias toward underestimation.

• Korean Journal of Materials Research
• /
• v.26 no.11
• /
• pp.662-669
• /
• 2016

In order to identify changes in the nature of the particles due to changes in the inflow rate of the raw material solution, the present study was intended to prepare nano-sized cobalt oxide ($Co_3O_4$) powder with an average particle size of 50 nm or less by spray pyrolysis reaction using raw cobalt chloride solution. As the inflow rate of the raw material solution increased, droplets formed by the pyrolysis reaction showed more divided form and the particle size distribution was more uneven. As the inflow rate of the solution increased from 2 to 10 ml/min, the average particle size of the formed particles increased from about 25 nm to 40 nm, while the average particle size did not show significant changes when the inflow rate increased from 10 to 50 ml/min. XRD analysis showed that the intensity of the XRD peaks increased remarkably when the inflow rate of the solution increased from 2 to 10 ml/min. On the other hand, the peak intensity stayed almost constant when the inflow rate increased from 10 to 50 ml/min. With the increase in the inflow rate from 2 to 10 ml/min, the specific surface area of the particles decreased by approximately 20 %. On the contrary, the specific surface area stayed constant when the inflow rate increased from 10 to 50 ml/min.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.423-429
• /
• 2000

The water conditioning experiments of brown rice were performed to verify the effect of brown rice conditioner and to decide the optimum operating variables for the conditioner. The initial moisture contents of 13-14%(wb) brown rice were used as experimental samples. The flow rate of brown rice passing through the conditioner was 2,940 kg/hr and water was supplied proportionally from 80 cc/min to 240 cc/min. The differences between expected and measured moisture contents were neglected except 0.25%(wb) of the maximum differences at 0.2920((cc/min)-water/(kg/min)'%-brown rice) of water supply rate. For the initial moisture contents of 13-14%(wb) brown rice, it was found that a proper water supply rate was 0.2415((cc/min)-water/(kg/min).%-brown rice) and the increments of whole rice was 2.3% compared to non conditioned ones. It was considered that the conditioning process did not influence the whiteness of milled rice because the whiteness differences between conditioned and non-conditioned milled rice were negligible.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.135-142
• /
• 2001

The effect of tensile hold time on the creep-fatigue interaction in AISI 316 stainless steel was investigated. To study the fatigue characteristics of the material, strain controlled low cycle fatigue(LCF) tests were carried out under the continuous triangular waveshape with three different total strain ranges of 1.0%, 1.5% and 2.0%. To study the creep-fatigue interaction, 5min., 10min., and 30min. of tensile hold times were applied to the continuous triangular waveshape with the same three total strain ranges. The creep-fatigue life was found to be the longest when the 5min. tensile hold time was applied and was the shortest when the 30min. tensile hold time was applied. The cause fur the shortest creep-fatigue life under the 30min. tensile hold time is believed to be the effect of the increased creep damage per cycle as the hold time increases. The creep-fatigue life prediction using artificial neural network(ANN) showed closer prediction values to the experimental values than by the modified Coffin-Manson method.

• Korean Journal of Pharmacognosy
• /
• v.40 no.1
• /
• pp.77-81
• /
• 2009

Abies nephrolepis(Pinaceae) extracts were tested for determined immune system regulating activity based on antiinflammatory activity, antioxidant activity and anti-proliferative effect on HeLa cell line. The A. nephrolepis extracts increased dose-dependently anti-proliferation of HeLa cell line. The DM fraction of the extracts having anti-proliferatative effects of HeLa cell line was fractionalized four subfractions($D1{\sim}D4$). Inflammation-induced NO production was inhibited by D2 and D4 in LPS-activated RAW264.7 macrophages. And also, this fractions showed antioxidant activity examined by DPPH radical scavenging effects. These results suggest that the potential use of DM fraction of A. nephrolepis in chemoprevention and regulation overproduction of NO on pathogenic conditions. The mechanism of the inflammatory effects, however, must be evaluated through various parameters in the induction cascade of NO production.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.1
• /
• pp.51-54
• /
• 2000

A column-switching high performance liquid chromatographic method has been developed for the determination of a fluconazole in human plasma. Each plasma sample was centrifuged for 10 min at 5000 g. After an aliqout of the supernatant was taken to nylon microcentrifuge filter, these samples were centrifuged for 10 min at 5000 g. An aliqout of the supernatant was injected directly onto the HPLC column. Deionized water was run for 2 min at a flow rate of 1.0 ml/min to retain fluconazole in an extration column, while proteins and endogenous interferences were eluted to the waste. The analyte was then back-flushed onto an analytical column, $C_{18}$ reversed-phase column. The mobile phase for analytical column, 0.01 M sodium acetate (pH 5.0)-methanol (65:35, v/v), was run at a flow rate of 1.0 ml/min. The column effluent was monitored by ultraviolet detection at 261 nm. The retention time for fluconazole was 11.76 min in human plasma. The detection limit for fluconazole in human plasma was $0.2\;{\mu}g/ml$. No interference from endogenous substances was observed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5563-5582
• /
• 2016

Parametric min-cuts is an object proposal algorithm, which can be used for accurate image segmentation. In parametric min-cuts, foreground seeds generation plays an important role since the number and quality of foreground seeds have great effect on its efficiency and accuracy. To improve the performance of parametric min-cuts, this paper proposes a new framework for foreground seeds generation. First, to increase the odds of finding objects, saliency detection at multiple scales is used to generate a large set of diverse candidate seeds. Second, to further select good-quality seeds, a two-stage cascaded ranking classifier is used to filter and rank the candidates based on their appearance features. Experimental results show that parametric min-cuts using our seeding strategy can obtain a relative small pool of proposals with high accuracy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.27-30
• /
• 2002

Boron Phosphide films were deposited on the glass substrate at the low temperature, $550^{\circ}C$, $480^{\circ}C$, by the reaction of $B_{2}H_{6}$, with $PH_{3}$ using CVD. The reactant gas rates were 50 cc/min and 20 cc/min for $B_{2}H_{6}$, 50 cc/min and 40 cc/min for $PH_{3}$ and $1.5\ell$/min for $N_{2}$ carrier gas. The films were annealed for 1hour, 3hours in $N_{2}$ ambient at $550^{\circ}C$ and $400^{\circ}C$. The deposition rate was $1000{\AA}$/min and the refractive index of film was 2.6. From results of XRD measurement the films have the preferred orientation of (1 0 1). For as deposited the film, the data of VIS spectrophotometer show 75.49%, 76.71% for 1hr-annealed and 86.4% for 3hrs-annealed. From AFM datas the surface condition of obtained films are was shown $73{\AA}$, $88.9{\AA}$ and $220{\AA}$ for as-deposited, for 1hr-annealed and for 3hr annealed, respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.1-10
• /
• 1998

Testing high reliability devices under nomal operating condition is difficult, because the devices are not likely to fail in the relatively short time available for tests. For most applications it is necessary to accelerate the causes of failure by increasing a stress above its nomal value. Previous accelerated life test(ALT) plans have shown how to find optimum allocation, lowest stress and sample size subject to minimizing the variance of mean life estimator. In these ALT plans, the highest acceptable test-stress was assumed to be specified in advance by the experimenter but there is no guidance for selecting it. This assumption is, however, inappropriate for many applications. Testing devices at too-high stress levels can invalidate the extrapolation model, or introduce failure mechanisms that are not anticipated under nomal operating conditions. In this paper, we propose new 4:2:1 compromise plans using Min-Max method to minimize this risk and present minimized test-stress levels(max, middle, min), and find sample allocation based on Min-Max 4:2:1 compromise plans. In result, we compare previous 4:2:1 compromise plans specified maximum test-stress with Min-Max 4:2:1 compromise plans minimized maximum test-stress.