• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.298-298
• /
• 2022

Milling is an important process that determines the quality of flour and is affected by milling machine type, scale, and tempering conditions. In addition, seed hardness is an important factor in determining the amount of tempering water and has been reported to affects flour yield and flour quality. There are reports that vitreousity is used as a measure to distinguish between soft and hard seeds, and the higher the vitreousity, the higher the protein contents. However, there is no established system for measuring viterousity of seeds and studies on the vitreousity and quality characteristics of flour are insufficient. Therefore, in this study, vitreousity, hardness, and milling characteristics were evaluated for 46 major domestic varieties, and their relationship was confirmed. After cutting the seeds using a seed cutter, vitreousity was measured, and seed hardness and flour particle size was measured using SKCS and PSI, respectively. As for the seed hardness index, 'Joa' was the lowest with 11.6, 'Yeonbaek' was the highest with 78.7. As for the milling yield, 'Saeol' had the lowest at 58.1%, and 'Hcjoong' had the highest at 88.6%. Seed hardness index and wheat flour production showed a high positively correlation, showing a similar to that of previous studies. Also, in flour particle size, 'Gobun' was the largest at 75.5 pm, and 'Joa' was the smallest at 43.1 um. Flour yield and flour particle size showed a high positively correlation. As a result of vitreousity, 'Hwangeumal' (55.2%), 'Saekeumkang' (59.1%), 'Baekkang' (52.3%), 'Goso' (44.6%), and 'Joa' (19.2%) were showed. Seed hardness and vitreousity showed a high positively correlation. Also as the vitreousity increased, the flour yield also showed a tendency to increase. In addition, as the seed hardness increased, particle size of the flour yield also showed a tendency to increase. It is thought that this result can be used as a measure to determine the quality of flour with vitreousity. However, further analysis of wheat varieties and methods of analyzing vitreousity are needed.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.65-71
• /
• 1998

This paper presents in-process compensation methodology to eliminate cutter runout and improve machined surface quality. The cutter runout compensation system consists of the micro-positioning mechanism with the PZT (piezo-electric translator) which is embeded in the sliding table to manipulate the radial depth of cut in real time. For the implementation of cutter runout compensation methodology. cutting force adaptive control was proposed in the angle domain based upon PI (proportional-integral) control strategy to eliminate chip-load change in end milling process. Micro-positioning control due to adaptive acuation force response improves the machined surface quality by compensation or elimination of cutter runout induced cutting force variation. This results will provide lots of information to build-up the precision machining technology.

• Korean journal of food and cookery science
• /
• v.29 no.6
• /
• pp.741-747
• /
• 2013

This study was carried out to investigate the quality characteristics of roll mill, jet mill Hericium erinaceus (HE) powders and seasonings using them (RPS and JPS). Water binding capacity of the jet mill HE powder(JP) was higher than that of roll mill HE powder(RP). The reduction of particle size resulted in the increases of specific surface area and JP showed smaller particle size than RP. $L^*$ of JP was significantly higher than that of RP. In sensory evaluation, the color and the flavor of seasoning showed on significant difference. Control and JPS got significantly high scores in 'Overall Acceptability' than RPS. Based on the results in this study, JPS is considered to have potential to be developed commercially as seasoning.

• Transactions of Materials Processing
• /
• v.25 no.3
• /
• pp.195-202
• /
• 2016

Direct laser melting(DLM) is an additive manufacturing process that can produce parts by solidification of molten metallic powder layer by layer. The properties of the fabricated parts strongly depend on characteristics of the metallic powder. Atomized powders having spherical morphology have commonly been used for DLM. Mechanical ball-milling is a powder processing technique that can provide non-spherical solid powders without melting. The aim of the current study was to investigate the effect of powder morphologies on the deposition quality in DLM. To characterize the morphological effect, the performances of spherical and non-spherical powders were compared using both single- and multi-track DLM experiments. DLM experiments were performed with various laser process parameters such as laser power and scan rate, and the deposition quality was evaluated. The surface roughness, cross-section bead shape and process defects such as balling or non-filled area were compared and discussed in this study.

• Food Science and Preservation
• /
• v.12 no.3
• /
• pp.230-234
• /
• 2005

This study was carried out to investigate the sensory and physicochemical properties of rice cake(Backsulki) according to milling type and particle size. Moisture contents of rice cake(Backsulki) were $31.9{\sim}34.8\%$ W80(more than $180\;{\mu}m$ rice flour using wet milling) had the highest L value 92.5 and D80(more than $180\;{\mu}m$ rice flour using dry milling) had the lowest L value 79. Degree of gelatinization of rice cake(Backsulki) were $3.8{\sim}6.2\%$ and hardness were decreased as particle size of rice flour decreased Sensory properties of rice cake(Backsulki) with W80 showed the highest score.

• Korean Journal of Human Ecology
• /
• v.3 no.2
• /
• pp.68-76
• /
• 2000

The quality of Injulmi, waxy rice cake is affected by milling methods. varieties. additives, steeping condition before milling and the texture properties during storage. Sinsunchalbyeo and Hwasunchalbyeo flours were made using pin-dry milling(PDM) and roller-wet milling( RWM) methods. Injulmi was made from those flours with different sugars, sucrose, maltose. oligosaccharide, and were measured textural properties of Injulmi stored at 2 $0^{\circ}C$ for 0, 12, 36 and 60 hrs, respectively. The hardness of sucrose added to injulmi made from PDM flour was the highest among any other sugars, but Injulmi from RWM flour was increased in the following order sucrose>maltose>oligosaccharide>non - added Injulmi. Adhesiveness of none added Injulmi were the lowest among sugar added Injulmi including, oligosaccharide, maltose and sucrose added Injulmi.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1546-1553
• /
• 2012

In this study, sorghum teas were prepared from Sorghum bicolor L. Moench subjected to different types of milling (no milling (0%), minimum milling (5%), and milling (20%)) and pan-firing times (1 to 10 minutes), and its quality characteristics were investigated. With regards to milling type, total polyphenolic, flavonoid, tannin contents, and antioxidant activities of ethanol extracts from both no milling sorghum and its tea were highest, followed by minimum milling and milling in decreasing order. Crude nitrogen content was highest in milling sorghum and its tea regardless of pan-firing time. With regards to pan-firing time, total polyphenolic, flavonoid, tannin contents, and antioxidant activities of sorghum teas increased with increasing pan-firing time regardless of milling type. The highest DPPH and ABTS radical scavenging activities were observed at a pan-firing time between 7 to 9 minutes. In contrast to ethanol extracts of pan-fried sorghum tea, antioxidant activities, chromaticity, and turbidity of hot water leaching liqueur of sorghum tea were highest in milling sorghum tea, followed by minimum milling and no milling sorghum tea.

• Korean Journal of Food Science and Technology
• /
• v.48 no.3
• /
• pp.256-261
• /
• 2016

This study investigated the changes in functional components of barley powder produced from different grain varieties (Dahan, Hinchalssalbori, Heukgwang, Huknuri and Boseokchal) and varying milling degrees (27, 23, 19, and 15%). Total polyphenol contents increased with a decrease in the milling degree, with content ranges of 0.97-1.40, 1.19-1.66, 1.22-1.77, 1.30-1.93, and 1.46-2.12 mg/g, respectively. Total flavonoids content also increased with a decrease in the milling degree. The total polyphenol and flavonoids contents were the highest in barley powder from Huknuri and Boseokchal grains. Total dietary fiber, arabinoxylan, and GABA contents increased with a decrease in the milling degree. As the milling degrees decreased, ${\beta}$-glucan contents, which was the highest in Hinchalssalbori and Boseokchal, decreased with ranges of 4.98-7.29, 5.26-7.03, 4.84-7.17, 4.84-700, and 4.66-6.33 mg/100 g, respectively. These results provide useful data for selection of an appropriate variety and milling degree to achieve a high quality in barley processing.

• Korean Journal of Food Science and Technology
• /
• v.6 no.3
• /
• pp.133-137
• /
• 1974

In and attempt to investigate the milling method of barley, four kinds of barley were used for this study. The results are summerized as follow: 1) The optimum tempering and priority of milling quality of barley is shown as following table. Barley is Tempering moisture 15%, Tempering time 24hr. Naked barley is Tempering moisture 14%, Tempering time 48hr. Barley and Naked barley are Tempering moisture 13%, Tempering time 48hr. 2) Economic value of pearled materials milling is disadvantageous, because of the milling expenses are burdensome and flour extractions are fallen down 12.5% in barley and 13.6% in naked barley as compared with unpearled materials milling. 3) Wheat flour milling process may be used without any adjustment when mixed with 90% of wheat and 10% of barley. 4) Unpearled naked barley is the most suitable for flour milling when mixed with wheat.