• 대한산업공학회지
• /
• 제9권2호
• /
• pp.27-35
• /
• 1983

This paper describes a procedure of generating economic cutter-location(CL) data for the machining of sculptured surfaces on a multi-axis NC milling machine. Measures of economy are the machining time (cutter move distance) and the length of NC tape (number of CL data points). The presented procedure minimizes both the number of CL data and the total distance of cutter moves, for a given cutter (spherical end-mill) size and parameteric cutting direction, while satisfying given tolerance requirements. The procedure has been implemented in FORTRAN for a smooth composite Bezier surface. The maximum allowable cutter size is calculated by the program so that a user can choose a cutter size. CL data can be generated in both parametric directions u and v. Experimental results show that there are significant differences between the parametric directions, and that cutter size should be as large as possible in order to minimize the cutting time and NC tape length.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.50-64
• /
• 1994

Cutter deflections in the ball-end milling process is one of the main causes of the machining errors on a free-form surface. In order to avoid machining errors in this process, a methodology avoiding these machining errors on the free-form surfaces has been developed. In this method, feedrates in the finish cuts are adjusted for the prevention of machining errors. A model for the prediction of machining errors on the free-form surface is analytically derived as a function of feed and normal vector at the surface of contact point by the cutter. This model is applied to the dertermination of the adjusted feedrates which satisfy the machining tolerance of the surface. In the finish cuts of a simple curved surface, the suggested model is examined by the measurements of the generated machining error on this surface. And also, this surface is machined with the adjusted feedrates for the given machining tolerance. The measured machining errors on this surface are compared with the given tolerance. In this comparisons, it is shown that the predicted errors are fairly good agreement with the test results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.283-284
• /
• 2007

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.75-81
• /
• 2003

Pocket machining is metal removal operation commonly used for creating depressions in machined parts. Numerically controlled milling is the primary means for machining complex die surface. These complex surfaces are generated by a milling cutter which removes material as it traces out pre-specified tool paths. To machine, a component on a CNC machine, part programs which define the cutting tool path are needed. This tool path is usually planned from CAD, and converted to a CAM machine input format. In this paper I proposed a new method for generating NC tool paths. This method generates automatically NC tool paths with dynamic elimination of machining errors in 2$\frac{1}{2}$ arbitrary shaped pockets. This paper generates a spiral-like tool path by dynamic computing optimal pocket of the pocket boundary contour based on the type and size of the milling cutter, the geometry of the pocket contour and surface finish tolerance requirements. This part programming system is PC based and simultaneously generates a G-code file.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.35-42
• /
• 2002

Verification of tool collision Is an important issue in die and mold machining. In this paper three functions of verification for 3-axis milling machining are schematically explained. Operators of geometric models are explained at first, which will be used in the functions of verification. The first verification function is getting a collision-free region when a tool assembly and a part surface model are given. The second function estimates the shortest length of cutter shank with that the tool cuts all of a region without collision The last one is cutting simulation considering all parts of tool assembly as well as cutter blade. Proposed approaches can be easily implemented by using several basic operators of geometric model. An example to calculate collision-free region is presented also.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.87-96
• /
• 1996

On face milling operation a newly optimal tool, which can minimize the resultant cutting forces resulted from the cutting force model, was designed and manufactrued. Cutting experiments using the new and conventional tools were carried out and the cutting forces resulted from those tools were analyzed in time and frequency domains. The performance of the optimized cutter was tested through the dynamic cutting forces resulted form the newly designed tool are much reduced in comparision with those from the conventional tool. By reducing the dynamic cutting force fluctuations, machine tool vibrations can be reduced, and stable cutting operation can be carried out.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.24-29
• /
• 2017

This paper provides an experimental analysis on the breakage of the coated tool using the face-milling cutter of the machining center due to changes in the cutting speed and the feed rate. The experimental studies were conducted using STS 304 materials and the damage to the tool was analyzed according to the change in machining time. The experiments confirmed that the cutting speed and feed rate affected the tool damage and the mechanical impact and thermal shock were determined to severely damage the tool. From the production engineering point of view, it has been experimentally investigated that the increased feed rate significantly influences the material removal rate more than the increased cutting speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.453-454
• /
• 2006

This paper describes a processing verification technique for developing about end-milling cutters. Developed software is processing verification module for manufacturing. By using cutting simulation method, we can obtain center points of finding wheel via Boolean operation between a grinding wheel and a cylindrical workpiece. The obtained CL data can be used for calculating NC data. After then, we can simulate by using designed grinding machine and NC data. This research has been implemented on a commercial CAD system by using the API function programming. The operator can evaluate the cutting simulation process and reduce the time of design and manufacturing.

• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.34-41
• /
• 2002

Five-axis NC machining, in general, is utilized in fabricating impellers, turbine blades, marine propellers that can be machined more effectively rather than three-axis machining. There have been many researches concerning tool interference avoidance, optimization of tool orientation. The C-space or Configuration-space was originated from the robotics area, which depicts interference-free joint-values in motion planning. In the paper we propose an optimizing scheme by which the maximum effective-radius of a face-milling cutter can be achieved for each CC(cutter-contact) point. Also the concept of a C-space for a CC point, the effective-radius map for 5-axis face-milling, and some illustrative examples of marine propeller machining, are presented.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.73-80
• /
• 2006

This paper describes a analysis on the chip thickness model required for cutting force simulation in ball-end milling. In milling, cutting forces are obtained by multiplying chip area to specific cutting forces in each cutting instance. Specific cutting forces are one of the important factors for cutting force predication and have unique value according to workpiece materials. Chip area in two dimensional cutting is simply calculated using depth of cut and feed, but not simply obtained in three dimensional cutting such as milling due to complex cutting mechanics. In ball-end milling, machining is almost performed in the ball part of the cutter and tool radius is varied along contact point of the cutter and workpiece. In result, the cutting speed and the effective helix angle are changed according to length from the tool tip. In this study, for chip thickness model analysis, tool and chip geometry are analyzed and then the definition of chip thickness and estimation method are described. The resulted of analysis are verified by compared with geometrical simulation and other research. The proposed chip thickness model is more precise.