• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.135-145
• /
• 2007

The needs for the ultra fine particles have been increased in preparation field of raw powders such as fine ceramics and high functional products. In this study, a series of wet grinding experiments were carried out on inorganic powders such as calcite, pyrophyllite and talc by a stirred ball mill. The particle size distribution of ground products of each test material fur a given grinding time was found to be expressed by the grinding rate (selection function) which was obtained from the grinding kinetics analysis. The median diameter decreased from 6.49 to $0.47{\mu}m$ in calcite, and decreased from 3.91 to $1.14{\mu}m$ in pyrophyllite. However, in talc, median diameter was decreased a little bit from 10.30 to $6.67{\mu}m$. The grinding rate changing on calcite and pyriphyllite were similar at the same conditions. However, in the case of talc, it was observed that the grinding rate was not increased compared to other samples.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.519-526
• /
• 2001

The effects of methyl isobutyl ketone(MIBK)/ethanol(EtOH) solvent mixtures on the dispension, particle size distribution and rheology of $Al_2$O$_3$/ZrO$_2$ nonaqueous suspensions were investigated by measuring sedimentation density and viscosity. The sedimentation density of $Al_2$O$_3$ and ZrO$_2$ particles increased in MIBK-rich($\geq$60 vol%) solvents with 'Hypermer' KD-1 as a dispersant. The ball-milled suspensions in 80MIBK/20EtOH(vol%) solvent exhibited the narrow and unimodal particle size distribution. Although all Suspensions exhibited the Pseduo-Plastic flow(Shear thinning) the shear thinning behavior was somewhat different depending on the mixture ratio of $Al_2$O$_3$/ZrO$_2$ and MIBK/EtOH. Under a given shear rate( <300 s$^{-1}$ for $Al_2$O$_3$; <3000 s$^{-1}$ for ZrO$_2$) the strongest shear thinning appeared in the $Al_2$O$_3$ and ZrO$_2$ suspensions with pure MIBK solvent. The shear thinning was nearly independable on the mixture ratio of $Al_2$O$_3$/ZrO$_2$ in case of using the identical solvent(80MIBK/20EtOH, vol%).

• Journal of the Korean Electrochemical Society
• /
• v.18 no.4
• /
• pp.143-149
• /
• 2015

Carbon-coated $Li_2MnSiO_4$ powders as the active materials for the cathode were synthesized by planetary ball milling and solid-state reaction, and their phase formation behavior and charge-discharge properties were investigated. Calcination temperature and atmosphere were controlled in order to obtain the ${\beta}-Li_2MnSiO_4$ phase, which was active electrochemically, and the carbon-coated $Li_2MnSiO_4$ active material powders with near single phase ${\beta}-Li_2MnSiO_4$ could be fabricated. The particles of the synthesized powders were secondary particles composed of primary ones of about 100 nm size. The carbon incorporation was essential to enable the Li ions to be inserted and extracted from $Li_2MnSiO_4$ active materials, and the initial capacity of 192 mAh/g could be obtained in the $Li_2MnSiO_4$ active materials with 4.8 wt% of carbon.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.874-880
• /
• 2003

The effect of h-BN content on microstructure, mechanical properties, and machinability of AlN-BN based machinable ceramics were investigated. The relative density of sintered compact decreased with increasing h-BN content. The four-point flexural strength also decreased from 238 MPa of monolith up to 182 MPa by the addition of 30 vol％ h-BN. Both low Young's modulus and residual tensile stress, formed by the thermal expansion coefficient difference between AIN and h-BN, might cause the strength drop in AlN-BN composite. The crack deflection, and pull-out phenomena increased by the plate-like h-BN. However, the fracture toughness decreased with h-BN content. The second phases, consisted of YAG and ${\gamma}$-Al$_2$O$_3$, were formed by the reaction between Al$_2$O$_3$ and Y$_2$O$_3$. During end-milling process, feed and thrust forces measured for AlN-(10～30) vol％ BN composites decreased with increasing h-BN particles, showing excellent machinability. Also, irrespective of h-BN content, relatively good surfaces with roughness less than 0.5 m (Ra) could be achieved within short lapping time.

• Korean Journal of Food Science and Technology
• /
• v.46 no.4
• /
• pp.446-455
• /
• 2014

In this study, we aimed to develop mixed grain-derived hard liquor with enhanced favor and taste. First, fermentation characteristics analysis according to the grain used showed that rice and adlay produced high alcohol outputs of 15.2% and 13.3%, respectively, while that of barley was low at 5.6%. In an experiment in which different amounts sorghum flour were added, the sample without sorghum flour showed an alcohol content of 19.0%. The effect of adding up to 7% ipkuk (koji) was examined in a sensory test. Comprehensive preference increased with increasing amounts of added ipkuk. Fermentation characteristics analyses of distilled liquor into which milled rice (5% degrees of milling of unpolished waxy rice) was added showed that alcohol content and acidity were not greatly affected by its addition. Finally, an analysis of aromatic ingredients showed that the percentage of ethyl palmitate, which produces a smooth aroma, was the highest in distilled liquor made of mixed grains.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2010

CNT and permalloy composite plating was investigated. CNTs were pretreated prior to electroplating to disassemble the tangled CNT lumps. The ball milling as a physical pretreatment and the acid treatment as a chemical pretreatment were used. 10M nitric acid and 10 M sulfuric acid were used for the chemical pretreatment. Sulfuric acid was more effective than nitric acid to disassemble CNT lumps. To disperse CNT in the solution, surfactants were used. SDS, Triton X-100 and PAA were used for this purpose. More CNTs were incorporated in permalloy coating when PAA was used as a surfactant. The surface morphologies were observed with FESEM after electroplating CNT and permalloy. The current densities were varied from 10 to $80\;mA/cm^2$ and the concentration of PAA was fixed at 2 g/L. The optimum current density without surface cracks was $20\;mA/cm^2$. The crystallinity of the deposit was analyzed with XRD and the surface hardness was analyzed with Vicker's hardness tester. The corrosion behavior was analyzed with polarization plot. The physical properties of permalloy were not improved with CNT composite plating.

• The KIPS Transactions:PartB
• /
• v.11B no.2
• /
• pp.227-232
• /
• 2004

When we extract a representative term from text for information retrieval system or a special information for information retrieval and text milling system, we often need to solve the anaphora resolution problem. The antecedent decision problem of a pronoun is one of the major issues for anaphora resolution. In this paper, we are suggesting a method of deciding an antecedent of the third personal pronouns, such as “he/she/they” to analyze the contents of documents precisely. Generally, the antecedent of the third personal Pronouns seem to be the subject of the current statement or previous statement, and also it occasionally happens more than twice. Based on these characteristics, we have found rules for deciding an antecedent, by investigating a case of being an antecedent from the personal pronouns, which appears in the current statement and the previous statements. Since the heuristic rule differs on the case of the third personal pronouns, we described it as subjective case, objective case, and possessive case based on the case of the pronouns. We collected 300 sentences that include a pronoun from the newspaper articles on political issues. The result of our experiment shows that the recall and precision ratio on deciding the antecedent of the third personal pronouns are 79.0% and 86.8%, respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.263-268
• /
• 2002

본 연구는 고추분쇄용 세라믹 롤 분쇄기를 이용하여 고춧가루 생산시, 분쇄효율을 향상시키고자 기존의 롤 분쇄속도 40rpm(0.352m/s)에서 80rpm(0.704%)으로 증가시키고, 기존의 롤 회전비 2:1에서 5:1로 증가시켜 고추분쇄시 전단력 증가로 분쇄능을 향상시켰고, 연구 내용의 주요 결과를 요약하면 다음과 같다. 1. 세라믹치형롤 분쇄속도 40rpm(0.352m/s)에서는 롤 회전비 2:1에서 1,190$\mu\textrm{m}$ 입자가 32.7%, 590$\mu\textrm{m}$ 입자가 19.7%였고, 롤 회전비를 5:1로 증가시 590$\mu\textrm{m}$ 입자가 30.9%, 420$\mu\textrm{m}$ 입자가 17.2%로 중간 미분쇄 영역의 분포가 증가하여 미분쇄 효율이 향상됨을 알 수 있었다. 2. 분쇄물의 롤 통과횟수에 따른 분쇄능은 세라믹치형롤 모두 분쇄속도 80rpm(0.704m/s)에서 분쇄물의 미분쇄능이 향상되었고, 분쇄생성물의 임계처리 횟수가 3~4차임을 분석할 수 있었다. 3. 보통 고춧가루를 생산하는데 분쇄속도 40rpm(0.352m/s), 80rpm(0.704m/s), 두 롤의 회전비 2:1, 3:1, 4:1하에서는 생산되지 않았으나, 롤 회전비 5:1에서는 분쇄속도 40rpm(0.352m/s)일 경우 7차 분쇄후에, 분쇄속도 80rpm(0.704m/s)일 경우 5차분쇄후에 생성되어 분쇄처리횟수가 2회정도 단축되어 전단력 증가로 인하여 분쇄능이 향상된 것으로 분석되었다. 4. 기존의 고춧가루 분쇄조건인 분쇄속도 40rpm(0.352m/s), 롤 회전비 2:1보다 본 연구에서 개발한 분쇄속도 80rpm(0.704m/s), 롤 회전비 5:1인 분쇄조건이, 분쇄처리 횟수 단축 등이 분석됨으로서 섬유질이 많이 포함된 고춧가루 등의 재료가공 분쇄기술이 향상된 것으로 분석되었다.. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$0.24(100%)에 비하여 I3C 저농도 투여 실험군(Group 1; 0.85$\pm$0.23; 61%, P<0.01), 그리고 I3C 고농도 투여 실험군(Group 2 ; 1.32$\pm$0.29 ; 94%)의 순으로 감소하였다. 선종의 크기별 종양의 발생개수의

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.289-296
• /
• 2002

배아부착률이 높은 배아미를 생산하기 위한 기초 연구로서, 현미의 함수율과 입형정미기 축회전속도가 쌀 배아부착률, 싸래기율, 백도, 동할율 등에 미치는 영향을 구명하고자 하였다. 본 연구에서 분석된 결과를 요약하면 다음과 같다. 1. 축회전속도에 관계없이 현미의 함수율이 배아부착률에 큰 영향을 줌을 알 수 있었다. 쌀의 배아부착률은 함수율 13.2%에서는 약 70%∼76%이었고, 함수율 13.4∼14.5%에서 약 66∼67%, 함수율 15.2%에서 약 38∼46%, 함수율 15.4%에서는 약 9∼10%로서, 함수율이 증가함에 따라 배아부착률은 함수율 15.4%에서 급격히 감소하였다. 또한, 축회전속도 900rpm일 때의 배아부착률이 1100rpm일 때의 배아부착률보다 함수율 13.2%∼15.2% 범위에서 약 2∼8% 높은 것을 알 수 있었다. 식미를 고려하고 높은 배아부착률을 갖기 위해서는 약 함수율 15.2% 이하에서 도정하는 것이 좋은 것으로 사료되었으며, 정미기 축회전속도의 감소로 함수율 15.2% 이하에서는 쌀의 배아부착률을 약 8%까지 높일 수 있었다. 2. 축회전속도에 관계없이 현미의 함수율 증가에 쌀의 백도는 약 23에서 40가지 점차 증가하는 경향을 보였으며, 특히 함수율 약 15.2% 이상에서는 약 40까지 급격히 증가하였다. 함수율 13.2%∼15.4%에서 축회전속도 1100rpm에서의 백도가 900rpm일 때 보다 약 1.3∼4.0정도 약간 놀게 나타났으나, 함수율 약 16.7% 이상에서는 그 차이는 거의 없었다. 즉 쌀의 백도는 함수율에 따라 결정적인 영향을 받음을 알 수 있었다. 3. 함수율이 정백공정중 싸래기율에 커다란 영향을 미침을 알 수 있었다. 현미의 함수율 13.4%에서 16.7% 범위에서는 두 축회전속도에서 같은 경향으로 싸래기율이 약 3.5%에서 약 1%까지 점차로 감소하였다. 그러나 함수율이 16.7% 이상일 때부터 싸래기율이 증가하였다. 또한, 함수율 약 15.2%가지는 축회전속도 1100rpm에서의 싸래기율이 900rpm일 때 보다 약 0.6%∼1.0% 높게 나타났다. 4. 함수율 13.2%부터 16.2%까지는 함수율에 따라 배아미의 동할율은 거의 약 9% 이하로 일정하였다. 또한, 함수율 13.2%∼14.5% 사이와 17%이상에서는 1100rpm에서의 동할율이 900rpm일 때 보다 더 높게 나타났다. 그리고 축회전속도에 관계없이 함수율 16.7%에서는 동할율이 약 10%, 함수율 약 17%에서는 동할율이 약 20%까지 급격히 증가하였다. 결론적으로, 함수율이 쌀의 배아부착률, 백도, 싸래기율, 동할율에 결정적인 영향을 주고 있으며, 다음으로 입형정미기 축회전속도 역시 배아부착률, 백도, 싸래기율, 동할율 등의 물성에 영향을 미침을 알 수 있었다.

• 대한공업교육학회지
• /
• v.45 no.1
• /
• pp.42-62
• /
• 2020

The Ministry of Education has been quick to apply National Competency Standars (NCS) to industrial sites and educational·training institutions in order to resolve discrepancies between practical affairs in industrial sites and vocational education, training & requirements. Full implementation of NCS-based curriculum in vocational education of vocational high schools has been mandatory since 2018. This research used a region-stratified sample of 350 from teachers in 'machinery' and 'machine·metal' majors in mechanical departments of vocational high schools to investigate the awareness of practical courses for metal machining among the teachers. The research results are as follows. First, a majority of the respondents indicated the availability of turning process, milling process, computer integrated manufacturing and measuring courses in mechanical departments. Second, capabilities required by the industry are considered most in selecting practical courses and competence units. Third, positive changes with the introduction of practical courses in the school education are students' practical skills improvement and satisfaction of industrial requirements. Fourth, negative changes with the introduction of practical courses in the school education are too difficult learning modules used in practical courses for students and students' difficulty in learning because of the difference between equipment in schools and industrial equipment in learning modules. Fifth, teachers' satisfaction with practical courses classes and overall conditions is above the average, and their satisfaction with the level of practical courses and bookbinding or purchase of rearranged textbooks of practical courses is below the average. Therefore, application conditions of above-mentioned representative 4 practical courses should be examined and taken care of for consistent improvement to stabilize NCS-based educational courses in mechanical departments.