• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.214-214
• /
• 2017

Seeds of Tomato (Lycopersicon esculentum Mill.) have demanded high quality because of their high cost of seed. The optimization of the seed priming techniques that have positive effect on fast and uniform germination becomes important at the commercial level. Several factors such as solution composition, osmotic potential, and treatment duration affect seed priming response. In this study, osmotic potentials of priming solution and germination characteristics of primed seed were investigated to clarify the effects different inorganic salt types and the duration. Tomato seeds were primed in osmotic solutions that were osmotic potential ranged -1.54 to -0.45 MPa in an aerated solution of PEG 8000 (17%, 22%, 27%), and inorganic salt solution of $KNO_3$, $Na_2SO_4$, and $K_2SO_4$ (100, 200, 300mM). The seeds were treated at $20^{\circ}C$ for 2, 4, and 6 days. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$. Four replications of 25 seeds per each treatments were placed in 10-cm petri dishes containing two filter papers and 3 ml of $dH_2O$ and incubated at $20^{\circ}C/30^{\circ}C$ and $15^{\circ}C$ and seedlings evaluated for abnormality after 14 days of incubation. Seed water potential (${\psi}$) was correlated with water potential of priming solution ($r^2=0.86$). Seeds primed in 100mM $KNO_3$ resulted the highest germination rate (GR, $63.9 %{\cdot}day^{-1}$) and lowest mean germination time (MGT, 2.0 days) comparing to untreated control ($23.9%{\cdot}day^{-1}$ of germination rate and 4.1 days of MGT) at $20/30^{\circ}C$, even though 96% of germination percentage were not different. Seeds primed in 100mM $KNO_3$ (${\psi}=-0.45MPa$) for 4 days showed ${\psi}=-0.38MPa$. Priming in $Na_2SO_4$, $K_2SO_4$, and PEG solution for 6 days improved MGT and GR, but not significantly than 4 days of treatment. Additionally, stepwise osmotic solution treatment with 100mM and 300mM concentration for 6 day did not showed differences with single treatment. In relation to osmotic potentials, identical osmotic potential in different inorganic salt solution showed different effect on germination characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.206-211
• /
• 2020

Tungsten alloys are used widely in general industrial fields, but they are difficult to cast, so products are manufactured using powder metallurgy. In this study, a mixed powder of tungsten, nickel, and iron homogenized using a ball mill was added to pure water as a solvent, and PVA as a binder was added to prepare a spray drying mixture. The mixed liquid was prepared using a spraying machine. A study was carried out to produce a granular powder that can reduce the variations between products during the molding and sintering process of the powder metallurgy method. A preliminary experiment was conducted to confirm the influence of the variables in the granulation process. Through the preliminary test results, this experiment was performed with the volume of solvent of the spray drying the mixture as an independent variable, and granular powder having a mean particle size similar to that of the existing mass-production conditions and an increased apparent density was prepared. In addition, a pilot test was conducted for the molding and sintering process. The improved granular powder reduced the characteristic variation (weight variation) of the mass-produced product.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.219-225
• /
• 2011

The physicochemical properties of rice endosperm from five rice varieties and effects of milling on baking bread properties of rice flour were investigated. Five rice varieties exhibited different level of amylose content. The ratio of longer amylopectin chain length to the distribution of endosperm starches was the highest in Goami3. According to the RVA measurement of rice flours, the pasting temperatures of Seolgaengbyeo and Goamibyeo were lower than those of the other rice varieties. There were differences in the changes of swelling power of rice flour under increasing temperature. Each rice flour sample for bread-making was processed into two different particle size by using an air-classification mill, and significant differences were observed among cultivars in the average particle size and damaged starch content of rice flours. Rice flour of Seolgaengbyeo with fine particle size showed the highest value in specific volume after baking.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.2
• /
• pp.1-8
• /
• 2012

This study is carried out to find the most optimal soil-plant combination in the urban agriculture by analyzing the association of soil base material which is being used in the urban agriculture with the growth of plants. 4 types of easily purchased soil (bed soil(A), animal vermicast soil(B), earth worm soil(C) and matured compost(D)) verified in aspects of effect and safety of soil in terms of growth of crop is selected as experimental soil and B, C, D type soils are mixed with granite soil at the ratio of 7 : 3. And granite soil(E) is set as a controlled soil and is compared to verify the effect of the experimental mixed soil. Herbaceous plants are classified into the fruit vegetables (Lycopersicon esculentum Mill. and Capsicum annuum L.), leafy vegetables (Brassica campestris L. ssp. Pekinensis and Lactuca sativa L.), medicinal vegetables (Chrysanthemum zawadskii var. latilobum and Liriope platyphylla F. T. Wang & T. Tang). The results of comparison of growth of herbaceous plants in different soil types showed that fruit vegetables and leafy vegetables in general had excellent growth in D type soil mixture and A type soil in general and had the poorest growth in E type (controlled) soil. 'Chrysanthemum zawadskii var. latilobum' had the excellent growth in D type, B type, C type mixed soil and A type soil and E type (controlled) soil are followed in order. In the case of 'Liriope platyphylla F. T. Wang & T. Tang', the difference in growth by each soil was shown to be insignificant. Therefore, the soil applied in the urban agriculture varies depending on each species of herbaceous plants, but it is considered effective to cultivate herbaceous plant which is economical and productive by using D type mixed soil which can be recycled and inexpensive compared with other experimental soils in the urban agriculture.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.103-114
• /
• 2004

This study aims at investigating the effect of soil moisture control and truss limited high density culture on the growth, fruit yield and quality of tomato. To minimize of loss yield of tomato, flower cluster in number was limited to two and three truss and planting density was raised. Soil moisture control was started from 40 days after anthesis and irrigation point was set in -30kPa and -50kPa, which were compared with -10kPa For high density culture, the planting number of truss limited high density culture was planted twice as many as control. Soil moisture repression reduced the growth of stem diameter, leaf and plant height. Leaf chlorophyll content was higher in -50kPa and -30kPa than control. No significant differences, however, shows in -10kPa. The occurrence rate of bloom-end rot and cracking was increased by growing of irrigation repression. Pinching three fruit truss was higher than pinching two fruit truss in the occurrence rate of them. Soil moisture repression resulted in the reduction of fruit weight and in special, truss limited high density was distinctly decreased in -50kPa. The number of fruit was not affected by soil moisture control, but 3rd flower cluster was lower than 2nd flower cluster in the number of fruits and 2nd one was lower than 1st one. Under irrigation repression, rate of dry matter tended to grow in -30kPa, -50kPa compared with control and pinching three fruit truss was higher than two truss. Marketable yield dropped to 36.7%m 46.3 in -30kPa, -50kPa on pinching two fruit truss and dropped to 27.3%, 32.3% in 3rd flower cluster compared with control.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.28-36
• /
• 2020

To enhance the recycling rate of wasted glass bottles toward recycled aggregates, the study would decide optimal comminution equipment based on the particle size distribution, aspect ratio and equipment energy analysis. The impact, compress and abrasion is type of generated force by comminution. So, hammer crusher, shredder, roll crusher and ball mill have been selected because they have characteristic which is each type of force. As a result of the particle size analysis of each product, only the shredder product satisfied concrete and asphalt aggregate quality standard condition. Also, as a result of aspect ratio analysis using Imaging software program (Image J, National institute of health), most of size fraction is confirmed under 1.6 value. It was confirmed that the product has low dangerousness and satisfying to shpage index. Also, the particle reduction ratio against input energy of shredder product was the most high. Therefore, we can decide that the optimal equipment which applicable for comminuting waste glass bottle in certain particle size under 10mm is shredder. The result of study will make contribution to increasing energy efficiency of comminution processing and competitiveness of product.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.116-121
• /
• 2019

In order to evaluating applicability of RAP (recycled aggregate powder) in mortar, in this study, physical and mechanical tests was carried out. Material characteristics of recycled aggregate and RAP were evaluated and the mechanical properties of mortar replaced with RAP were analyzed. Test result of sieve analysis showed that as the milling time increased the fineness modulus was decreased and the distribution of 0.6 mm particle size was found to increase. The fluidity of mortar mixture substituted with RAP tended to increase than Plain mixture. It was result that the increasing fluidity was affected by unreacted surplus water in the mortar as the binder was replaced with RAP. From the compressive strength result of the mortar subjected to RAP, it was found that the RAP was able to replace up to about 10% of unit binder weight although the compressive strength of mortar was decreased as the RAP replacement increased. From the above study, it can be concluded that the physical properties of RAP satisfied the quality standard of aggregate for replacement with fine aggregate. Moreover, in case of the RAP was replaced up to 10% of unit cement weight, it was able to be possible to improve fluidity and compressive strength of mortar.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.2
• /
• pp.113-119
• /
• 2017

This study investigated the quality characteristics of cream soup added with Pleurotus eryngii powder. Pleurotus eryngii was dried in a hot air dryer at $40^{\circ}C$ for 8 hours and at $60^{\circ}C$ for 8 hours. The dried Pleurotus eryngii was pulverized using a pin mill, and the powder was sieved through a 60~100 mesh. Sensory evaluations of cream soup added with different-sized particles of Pleurotus eryngii powder were performed. Cream soup added with Pleurotus eryngii powder of particles below $150{\mu}m$ showed good appearance, taste, and mouth-feel. Quality characterization of cream soup added with 5~20% Pleurotus eryngii powder showed that L value decreased with increasing Pleurotus eryngii, whereas a and b values increased. Sensory evaluations revealed that cream soup with 15% Pleurotus eryngii powder had significantly better taste, mouth-feel, and overall acceptability (p<0.05) than other samples. Thus, cream soup with 15% Pleurotus eryngii powder of particle size below $150{\mu}m$ was the most desirable and could be successfully used as convenience food in the food processing industry.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.1
• /
• pp.17-27
• /
• 2013

The effects of chlorine dioxide gas ($ClO_2$) treatments between high-concentration-short-time and low-concentration-long-time on maintaining the quality of cherry tomatoes (Lycopersicon esculentum Mill. cv 'unicorn') were investigated. Tomatoes were treated with 5 ppm for 10 min and 10 ppm for 3 min as high-concentration-short-time $ClO_2$ gas treatment conditions and 1 ppm for once a day interval in terms of low-concentration-long-time $ClO_2$ gas treatment condition, respectively. After $ClO_2$ gas treatments, tomatoes were storage at 5 and $23^{\circ}C$ for 7 days. Weight loss, changes in tomato color, firmness, soluble solids content, pH, growth of total microorganism, and decay rate were evaluated. On day 7, tomatoes treated with chlorine dioxide gas showed low values of respiratory rate, total microbial growth, and decay rate compared to those of tomato without chlorine dioxide gas treatment. Additionally, tomatoes treated the chlorine dioxide were kept the values of firmness and soluble solids content during storage. However, chlorine dioxide gas treatment on tomatoes had no direct effect on weight loss, pH, and color. Results showed that both $ClO_2$ concentration and treatment time played the important roles for keeping the quality of tomatoes during storage. Tomatoes with chlorine dioxide gas treatment of low-concentration-long-time had more effective values of firmness, the total microbial growth, and decay rate than those with two chlorine dioxide gas treatments of high-concentration-short-time. Results suggest the potential use of chlorine dioxide gas treatment of low-concentration-long-time as an highly effective method for keeping the freshness of cherry tomato.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.4
• /
• pp.249-256
• /
• 2006

The object of this experiment was to suggest the optimum autumn sown small forage crops as next forage crops harvested maize in Daejeon area. The field trials was conducted from 2002 to 2004 at Chungnam National University in order to evaluate the dry matter yield and qualities of the autumn sown small forage crops. The experiment was consisted of split plots (main plot : forage crops as rye, barley and wheat, and sub plot 4 harvest stages as boot, heading, milk and dough) design with three replications. The average DM yield for 2 years of rye was higher than that of other forage crops (p<0.01). As stages proceed, the DM yield tended to increase in all forage crops (p<0.01). In chemical composition, they had a difference on forage crops and stages. The crude protein (CP) was higher in barley (p<0.01), but fibrous contents such as NDF, ADF, cellulose and lignin were lower in wheat than in the other forage crops (p<0.01). In Daejeon area, although barley and wheat at milk and dough stages were observed with maximum yield and high quality as autumn sown forage crops, due to late harvesting periods, it is difficult to utilize them as previous forage crops seeded in maize. Based on the result mentioned above, it is concluded that rye harvested at boot to heading stages is the most suitable fur autumn sown small forage crops in Daejeon area. Meanwhile, in order to have the option of nutritional value in wheat and barley, they need to be supplied early maturing and high-yield variety of wheat and barley.