• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.9-20
• /
• 2019

A military aircraft generally includes external stores such as fuel tanks or external arming, depending on the purpose of the operation. When a store is dropped from a military aircraft at high subsonic, transonic, or supersonic speeds, the aerodynamic forces and moments acting on the store can be sufficient to send the store back into contact with the aircraft. This can cause damage to the aircraft and endanger the life of the crew. In this study, time accurate computational fluid dynamics (CFD) with dynamic moving grid (moving and deformable mesh, MDM) technique has been used to accurately calculate store trajectories. For the verification of the present numerical approach, a wind tunnel test model for the wing-pylon-finned store configuration has been considered and analyzed. The comparison results for the ejected store trajectories between the present numerical analysis and the wind tunnel test data at the Mach number of 0.95 and 1.2 are presented. It is also importantly shown that the numerical parameter of MDM technique gives significant effect for the calculated store trajectory in the low-supersonic flow such as Mach 1.2.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.665-677
• /
• 2019

The United States has implemented the TLCSM (Total Life Cycle System Management) to minimize the total lifecycle cost of aircraft and to improve operating availability. As a practical strategy, CBM + is required to be applied to new weapons systems. The F-35 aircraft applied PHM under CBM + concept from the development stage. In this study, we analyzed the technology trends, the level of PHM technology in Korea, and the development trends of foreign technology. Then, we analyzed the PHM technical elements and constructed the 5 phases of technical elements acquisition roadmap for military fixed wing aircraft parts PHM.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.339-347
• /
• 2021

Recently, the incidence of lightning in Korea has been increasing more and more. The damage caused by lightning is also getting worse. Lightning protection system is a prerequisite, not a sufficient condition. Considering the characteristics of lightning, there is a high frequency of lightning strikes in highlands. So, high grades of LPS should be applied to ground facilities of anti-aircraft weapons systems. 4-Level LPS was applied on groung facilities of anti-aircraft weapons system based on lightning incidence rate in past. There are some possibilities of damage from lightning in anti-aircraft weapons system. So, we have to readjust the LPS level with grounding, lightning rods and surge protect device based on lightning incidence rate in now days. Propose 2-level LPS and design with lightning rods, surge protector, separated grounding in this paper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.213-221
• /
• 2024

Aircraft's operational effectiveness is reduced due to threats from enemy anti-aircraft weapons, which is a weak point. In particular, guided missiles, which pose a threat to aircraft, are rapidly developing due to technological advancements in seekers, and are classified as one of the important technologies in weapon systems. Missile approach warning equipment installed to ensure aircraft survivability detects guided missiles and provides relevant information to respond. Tests were conducted domestically to verify the detection level of missile approach warning equipment, and test results were presented under various test conditions.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.93-100
• /
• 2008

In this paper, we propose the application of the Human Factors Analysis and Classification System(HFACS) to analyze an aircraft accident data. HFACS is a general human error framework originally developed and tested within the U.S military as a tool for investigating and analyzing the human causes of aviation accidents. It was examined that HFACS reliably accommodate all human causal factors associated with the commercial accidents. We found that the HFACS could be used as a reliable tool for investigating aircraft accidents including a single accident analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1051-1057
• /
• 2010

Database for the damage reference by armor piercing bullet test was established for both tube and plate specimens having a range of thickness. As the inclined angles of hit are increasing, it has been found that penetration damage diameter tends to increases accordingly in both specimen of the tube and plate, and such penetration damage diameter on the rear side becomes bigger than those on the front side. The tube specimen showed that the damage becomes bigger when central areas rather than the peripheral were hit. Through the plate test, it also has been found that the penetration ballistic limit for Al alloy is about 25.4mm and that of stainless steel about 12.7mm. From the fatigue analysis results using the database for damage reference, it has been identified whether the safety requirements of military aircraft could be met.

• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.145-152
• /
• 2012

This paper is the Software Hazard Analysis (SWHA) which will study the managerial process and the technical methode and techniques inherent in the performance of software safety task within the Military Aircraft System Safety program. This SWHA identifies potential hazardous effects on the software intensive systems and provides a comprehensive and qualitative assessment of the software safety. The purpose of this paper is to identify safety critical functions of software in Military A/C. The identified software hazards associated with the design or function will be evaluated for risks and operational constraint to further improve the software design requirement, analysis and testing efforts for safety critical software. This common SWHA, the first time analysis in KOREA, was review all avionics OFP(Operational Flight Program), and focus only on software segments which are safety critical. This paper provides a important understanding between the customer and developer as to how the software safety for the Military A/C will be accomplished. It will also provide the current best solution which may as one consider the necessary step in establishing a credible and cost-effective software safety program.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.6
• /
• pp.99-107
• /
• 2019

With the development of various types of military Unmanned Aircraft(UA)s, the need for interworking and integration between different platforms gradually increased. In order to ensure interoperability at each military UA System(UAS) level, North Atlantic Treaty Organization(NATO) has established STANAG-4586 "Standard Interfaces of Unmanned Aircraft(UA) Control Systems(UCS) for NATO UA Interoperability-Interface Control Document". This paper looks at the basic design structure of STANAG-4586 and the changes on Edition 4 to enhance joint operational capability through reflecting and updating the interoperability design of the military UAS. In particular, we analyze the enhanced Datalink Transition/Handover Procedure and Autonomous functions, one of the biggest features added to the edition. Through this, we propose a modification of UA data link exclusive control using UA Bypass structure, which was impossible in the one-to-one communication structure between existing UA and Core UCS(CUCS). We also suggest ways to improve UA operational reliability by applying Autonomous Functions that directly decides how to deal with emergency situations, rather than by a remote operator over CUCS.

• Journal of Applied Reliability
• /
• v.14 no.2
• /
• pp.114-121
• /
• 2014

An environmental test has been performed in order to improve the lifetime and reliability of the electrical units on aircraft. However, faults occurring in the field of aircraft have been difficult to predict and prevent, and new concepts for reliability testing are desired. Therefore, a composite reliability test sequence was proposed in the conventional studies. This study introduces test sequence guidelines based on relevant principles and considerations for electronic testing according to International Standard IEC-60068-1 and the United States Military Standard MIL-STD-810G. In addition, we analyze possible causes of failure using two-step QFD based on aircraft operation scenarios. Finally, the proposed test sequence can reproduce various and realistic failure modes for electrical units on aircraft.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.4
• /
• pp.551-568
• /
• 2003

The aircraft industry is a typical complex product system (CoPS) and one of the system integration industries. In this particular sector, industrial competitiveness is decided by technological capabilities in system level as well as subsystem level. Korea has been involved in the aircraft industry since early 1970s. Technological capability in the system level has been developed based on military aircraft production program. However, subsystem and component level capabilities have been remained less developed. In this paper, the capability building process as well as current problem; of the Korean aircraft industry have been examined. In conclusion, capability building up strategies in the Korean aircraft industry has been suggested.