• Environmental Engineering Research
• /
• v.23 no.4
• /
• pp.406-419
• /
• 2018

In planning public service systems such as waterworks, the design population is very important factor. Owing to the limitations of the indirect method, two new models, which take into consideration urban characteristics, were developed to accurately predict external migration rate (EMR), which is an essential component in estimating reliably the design population. The root mean square error (RMSE) between the model values and observed values were 10.12 and 15.58 for the metropolitan cities and counties respectively and were lower compared to RMSE values of 27.31 and 28.79 obtained by the indirect method. Thus, the developed models provide a more accurate estimate of EMR than the indirect method. In addition, the major influencing factors for external migration in counties were development type, ageing index, number of businesses. On the other hand, the major influencing migration factors for cities were project scale, distance to city center, manufacturing size, population growth rate and residential environment. Future medium and long-term studies would be done to identify emerging trends to appropriately inform policy making.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1521-1527
• /
• 2004

Thermocapillary migration of a liquid slug is caused by temperature difference between the ends of a slug. The temperature difference induces the difference of the surface tension coefficient and consequently of capillary pressure between the ends of the slug. Presently available model to predict a velocity of thermocapillary migration adopts the Poiseuille equation which is valid only for a very long slug and neglects the shear stress near the contact line. In the present study, a new model has been developed to consider the shear stress near the contact line so that it can be applied to slugs or drops of general configuration. The experiments using mineral oil with the length to diameter ratio being 10 and a glass capillary were performed. It was found that the liquid slug began to move upon overcoming contact angle hysteresis when the temperature difference reached 35$^{\circ}C$. The results indicate that the new model well predicts the velocity of the liquid slug.

• Nuclear Engineering and Technology
• /
• v.44 no.1
• /
• pp.79-88
• /
• 2012

Migration tests were performed with conservative tracers in a fractured zone that had a single fracture of about 2.5 m distance at the KURT. To interpret the migration of the tracers in the fractured rock, a solute transport model was developed. A two dimensional variable aperture channel model was adopted to describe the fractured path and hydrology, and a particle tracking method was used for solute transport. The simulation tried not only to develop a migration model of solutes for open flow environments but also to produce ideas for a better understanding of solute behaviours in indefinable fracture zones by comparing them to experimental results. The results of our simulations and experiments are described as elution and breakthrough curves, and are quantified by momentum analysis. The main retardation mechanism of nonsorbing tracers, including matrixdiffusion, was investigated.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.17 no.2
• /
• pp.129-138
• /
• 2013

A spatio-temporal models as systems of ODE which describe two-species Beddington - DeAngelis type predator-prey system living in a habitat of two identical patches linked by migration is investigated. It is assumed in the model that the per capita migration rate of each species is influenced not only by its own but also by the other one's density, i.e. there is cross diffusion present. We show that a standard (self-diffusion) system may be either stable or unstable, a cross-diffusion response can stabilize an unstable standard system and destabilize a stable standard system. For the diffusively stable model, numerical studies show that at a critical value of the bifurcation parameter the system undergoes a Turing bifurcation and the cross migration response is an important factor that should not be ignored when pattern emerges.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.181-188
• /
• 2019

The migration path of a multiple-generation technology that occurs during a technological substitution by a new technology is important to understanding the phenomenon of technological substitution, and can contribute to understanding the process of technological innovation. This research defines the concept of migration path and develops a model of the types of migration paths by multiple dimensions (actor, generation, and time) in a multiple-generation technology. Based on a literature review and tracking of migration paths according to multiple dimensions, the definitions and types of migration paths were provided, and the accuracy of the model was verified based on a case study of the semiconductor industry. The migration paths of suppliers are modeled with three types (switching, leapfrogging, and new entrance paths), and the migration paths of customers are modeled with four types (switching, leapfrogging, new entrance, and diffusion paths) in a multiple-generation technology. This research will be useful for understanding the migration paths in the phenomenon of technological substitution, and can be applied to other industries in addition to the semiconductor industry, including various actors. In addition, suppliers and customers can understand technological substitution and can establish a technology strategy against their competitors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.173-181
• /
• 1993

Under natural conditions, rivers do not in general take straight courses but instead take winding courses. This is known as meandering of rivers. Meandering of rivers are so complicated because of the mutual interactions between flow and movable boundaries. In quantitative information, it is important to predict the future location of a river channel(channel migration) because in selecting a bridge site or a location of a road. It may be valuable to know the future impact of a nearby river on those structures. When the prediction model of the migration of channel is used in domestic rivers with high coefficient of river regime, it is rational to use the periodical dominant discharge (PDD), which is named firstly by the author, instead of the average discharge. According to the analysis of the erosion coefficient, the mean deviation on the channel migration, and the bed scour factor, it can bring shedding light on the fact that the discharge is one of the dominant components in channel migration. In project area, the discharge that can shift the channel is slightly greater than 6,000CMS. The prediction model of the migration of channel estimated the erosion coefficient, $E_0$ by the data from the South Han River. This estimated value from the South Han River was also used to predict the migration of the South Han River in year 2000.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.5
• /
• pp.787-797
• /
• 2021

Yellowtail Seriola quinqueradiata tagged with a Pop-up Satellite Archival Tag (PSAT) was released off the coast of near the Moseulpo, Jeju Island and the ecological data during about 40 days was obtained. However, it is difficult to determine the spatial location of underwater ecological data. To improve the accuracy of estimating the Yellowtail migration route using temperature, suitable background field of the oceanic environment data was evaluated and used for input data. After developing of the tracking algorithm for migration route estimation, three experiment cases were estimated with ecological data among the surface layer, the mixed layer, and the whole water column. All tracking experiments move from western to eastern Jeju Island. Additionally, tracking experiment using 3D ocean numerical model reveal that it is possible to estimate the migration route using the fish ecological data of the entire water column. Therefore, using a large number of ecological data and a high-accuracy ocean numerical model to estimate the migration route seems to be a way to increase the accuracy of the tracking experiment. Moreover, the tracking algorithm of this study can be applied to small pelagic fishery using small archival electronic tags to track the migration route.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.209-216
• /
• 2006

This study is to analyse the characteristics of bar migration, which is important roles to bank erosion and meandering development, for the meandering channels with erodible bed by using a 2-D numerical model in the generalized coordinate systems. The results of the numerical experiments showed that the features of bar migration were affected by the meandering wavelength to the width ratio, and had a relatively good agreement with the criterion for bar migration through a bend suggested by Kinoshita and Miwa (1974). The bar migrated with speed in the channel with long wavelength and broad width, and the criterion for bar migration was increased. The bar celerity was decreased abruptly near the criterion.

• Computers and Concrete
• /
• v.12 no.4
• /
• pp.431-442
• /
• 2013

This study attempted to find a proper method applicable to simulating practical equifield lines of two-dimensional Accelerate Lithium Migration Technique (ALMT), and evaluate the feasibility of using the theoretical ion migration model of one-dimensional ALMT to predict the ion migration behavior of two-dimensional ALMT. The result showed that the electrolyte or carbon plate can be used as matrix to draw equifield line graph similar to that by using mortar as matrix. Using electrolyte electrode module for simulation has advantages of simple production, easy measurement, rapidness, and economy. The electrolyte module can be used to simulate the equifield line distribution diagram in practical two-dimensional electrode configuration firstly. Then, several equifield line zones were marked, and several subzones under one-dimensional ALMT were separated from various equifield line zones. The theoretical free content distribution of alkali in concrete under two-dimensional electric field effect could be obtained from duration analysis.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.255-263
• /
• 2005

Migration experiments of THO and 237Np have performed through a sampled granite core in Chemlab2 probe at the Aspo hard Rock laboratory. The elution curves of THO were analysed to determine hydraulic properties such as the extent of dispersion effect according to flow rates. The retardation phenomena of the solutes were observed and described with elution curves and migration plumes. After migration test, the rock core was opened, and the remaining radioactivities on the rock fracture surfaces were measured. The transport process was simulated with a two-dimensional channel model. The mass transport process was described with three types of basic processes ; advection, sorption and matrix diffusion. By the combination of these processes, effects of each process on transport were described in terms of elution curves and migration plumes. By comparing the simulation results to the experimental one, it was possible to analyse the retardation effect quantitatively.