• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.258-267
• /
• 2019

Synthetic suede without PFCs(perfluorinated compounds) are followed by subsequent high temperature treatment. But migration fastness of synthetic suede may be reduced due to sublimation of disperse dyes that results from the high temperature treatment. Therefore, in this study, chitosan treatment was used to improve the migration fastness before polyurethane dipping process. Polyester fiber was treated with sodium hydroxide aqueous solution before chitosan processing. This samples treated with a chitosan concentration upto 0.5% were dyed and coated with PUD(polyurethane dispersion). The migration fastness was most improved at 0.35% application. This is presumably due to the fact that the chitosan may increase the dye-binding capability through intermolecular hydrogen bonding.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.28-36
• /
• 2006

The polyurethane prepolymers, which were previously synthesized from 2,4-toluene disocyanate(2,4-TDI) and polypropylene glycol(PPG), were chain extended by ethylene diamine or hydroxyl terminated polydimethylsiloxane(HTPMS) having hydroxy group at both ends of the chain, giving polyurethaneurea(PU) and polyurethane containing HTPMS segment(SiPU), respectively. In thermal gravimetric analysis, PU was almost completely degraded at $500^{circ}$ but SiPU showed about 11% residue at the same temperature. Suspension of SiPU and pigment showed more good compatibility than that of PU and pigment. The crocking fastness, migration fastness and solvent wicking were enhanced to 4.5 grades, 4 grades and 4 grades, respectively.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.545-549
• /
• 2003

Dyeing properties such as migration of disperse dye and color fastness of 4 types of the carrier[Carrier-I(methyl napthalene). Carrier-II(chloro benzene). Carrier-III(aromatic ether) and Carrier-IV(o-phenyl phenol)] were evaluated for the study. For the results, the optimum dyeing time and concentration of the carrier was 30min at $110^{\circ}C$ and 2g/l, respectively. The redyeing ratio of the fabric samples treated with Carrier-II and III was higher than that treated with Carrier-I and IV, thus, if was conclude that the redyeing ratio of the samples treated with Carrier-II and III was excellent. The light fastness of the samples treated with Carrier-III and IV was higher than that of Carrier-I and II in order of 2-4 grades. However, there were little changes in terms of washing and sublimation and rubbing fastness for the samples.

• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.180-187
• /
• 2001

Generally, polyester microfiber has much greater dye uptake than that of regular ones. In spite of high dye up-take visual shade depth of dyed fabric decreases with smaller denier, which results in poor washing fastness of dyed fabric. In this study, in order to investigate the washing fastness, polyester microfiber fabric was dyed by using two type of disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods in this study are normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during reduction clearing. The results were as followings ; The most important factors affecting the washing fastness of polyester artificial suede fabric were found to be the reduction clearing method, the chemical structure of used disperse dyes and the structure and denier of fibers. It was also obtained that the heat treatment of dyed fabric decreased the washing fastness due to the dye migration from inner phase to surface.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.12-21
• /
• 2009

The dyeing property of direct-spinning type and seaisland type 0.2D micro polyester nonwoven fabrics was characterized by three disperse dyes (Dorosperse Red KFFB, Blue KGBR, Yellow KRL) at $120^{\circ}C$ and $130^{\circ}C$. Before and after reduction cleaning, dyeing fastness was evaluated and the thermomigaration after heat setting at $180^{\circ}C$ for 60 min were also evaluated. Direct-spinning type fabric showed better dyeing property, wash fastness, and light fastness, but worse rub fastness than seaisland type fabric. The dyeing property and fastness of direct-spinning type fabric increased at higher dyeing temperature, whereas seaisland type fabric exhibited lower dyeing fastness and the increase of thermomigration at higher dyeing temperature. Non-fixed dye in fiber surface was removed by reduction cleaning process, then dyeing fastness was improved and thermomigration decreased. The higher dye uptake of direct-spinning type non-woven fabric caused the increase of dye molecule migration from fiber internal to fiber surface, so this fabric showed larger thermomigration than seaisland type non-woven fabric.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.280-289
• /
• 2016

Silica microgel was prepared by sol-gel process and then functional groups, epoxy group and ethoxy group, were introduced on the particle by coupling treatment with 3-glysidoxypropyltrimethoxysilane. The functional silica microgel(functional SiGel) formation was identified using FT-IR spectrometry. Phase stability for DMF solution of functional SiGel, PU resin and pigment was evaluated by Turbiscan Lab. And physical properties of artificial suede including hand values, morphology and dyeing fastness were investigated. The mean particle size and the specific surface area of the functional SiGel were $0.77{\mu}m$ and $380m^2/g$. Mixture containing the functional SiGel, PU resin and pigment was more stable than the functional SiGel-free mixed solution. Artificial suede prepared by the functional SiGel had appearance and feeling close to natural suede. The migration fastness, the solvent wicking fastness and rubbing fastness of the artificial suede were enhanced to 4~5 grades, 4~5 grades and 3~4 grades, respectively.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.20-26
• /
• 2005

For developing digital printing textiles, special pretreatment processes are necessary. These processes include developing formulation of coating agent and coating processes. The pretreatment were investigated with the variation concentration of anti-migration agent, fixation chemical etc.. The printing qualities according to pretreatment conditions were studied with color yield, printed capital letter sharpness and washing fastness. It was observed that the concentration of anti-migration agent, fixation agent(alkali) was closely related to printing qualities. For developing industrial technology of cellulosic digital printing textiles, optimum viscosity of pretreatment coating formulation is very important factor.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.229-235
• /
• 2014

This study conducted a research on burn-out printing convergence technology for cellulose blend knit fabrics. Printing technology, which forms color pattern on the fabric, can be generally classified into four according to printer or printing method, e.g. screen printing, roller printing, rotary printing, digital printing. However, these printing methods are flat in design or pattern, which have limitation to overcome monotonousness of fabric, so that recently burn-out process method, which expresses three-dimensional pattern effect by treating chemical on the surface of fabric as the method to appeal its esthetics to the customers. Particularly, in case of cellulose/polyester composite material, first, it is proceeded in 2 processes, by dyeing cellulose or polyester fabric and burning out cellulose fabric, in this process, due to pollution caused by disperse dye migration, color of polyester fabric part could be discolored, which has high falt risk. This research considered coloring burn-out technique, which simultaneously proceed dyeing and burn-out by reducing dyeing and burn-out process to 1 stage, which were proceeded in 2 stages previously. As the research result, it was confirmed that reasonable depth of roller was 0.04~0.06mm in roller printing process, heat treatment condition of burn-out far-infrared radiation was $185^{\circ}C{\times}30m/min$. Color fastness to washing was confirmed to be 4-5 grade, color fastness to rubbing, 3-4 grade, color fastness to light, 4 grade. Also, it was confirmed that energy reduction effect appeared 38.19%, in case of energy cost per yard compared to the existing production, also, 19.74%, in case of production cost.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.44-44
• /
• 2011

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.47-47
• /
• 2012