• ETRI Journal
• /
• 제39권3호
• /
• pp.336-344
• /
• 2017

In this paper, we propose a convenient microwave orbital angular momentum (OAM) mode generation and multiplexing method operating in the 18 GHz frequency band, based on a $2{\times}2$ uniform circular array and a $4{\times}4$ Butler matrix. The three OAM modes -1, 0, and +1 were generated and verified using spatial S-parameter measurements; the measured back-to-back mode isolation was greater than 17 dB in the full 17 GHz to 19 GHz range. However, the radiated OAM beam centers were slightly dislocated and varied with both frequency and the mode index, because of the non-ideal characteristics of the Butler matrix. This resulted in mode isolation degradation and transmission distance limitations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.238-239
• /
• 2007

In this study, the structural and microwave dielectric properties of the $Ba_{5}Nb_{4}O_{15}$ cation-deficient perovskite ceramics with sintering temperature were investigated. All sample of the $Ba_{5}Nb_{4}O_{15}$ ceramics were prepared by the conventional mixed oxide method and sintered at $1325^{\circ}C{\sim}1500^{\circ}C$. The bulk density, dielectric constant and quality factor of the $Ba_{5}Nb_{4}O_{15}$ ceramics were increased in the range of $1325^{\circ}C{\sim}1400^{\circ}C$ and decreased above the sintering temperature of 1400$^{\circ}C$. In the case of the $Ba_{5}Nb_{4}O_{15}$ ceramics sintered at 1400$^{\circ}C$ for 5h, the dielectric constant, quality factor and temperature coefficient of the resonant frequency (TCRF) were 39.55, 28,052GHz, 5.7ppm/$^{\circ}C$, respectively.

• 한국전자파학회논문지
• /
• 제25권4호
• /
• pp.442-450
• /
• 2014

본 논문은 피부를 포함하는 유방 모델에서 정합 액체의 전파 특성에 관한 연구 내용이다. 정합 액체의 분석을 위해 6개 타입의 정합 액체를 제안된 1-D 유방 모델에 적용하여 3~6 GHz의 주파수 대역에서 분석 연구를 수행하였다. 균일한 평면파가 1-D 유방 모델 내부의 복합 매질의 경계면에 입사되어 반사/투과되어 나타나는 전파 특성과 각 정합 액체의 전송 선로 손실을 분석하였다. 본 논문에서 연구한 방법은 유방암 진단 시스템, 인체 조직을 이용한 암 진단 분야 및 기타 의료기기 분야에 활용될 수 있으며, 본 논문에서는 유방암 진단 시스템에 적용하였다. 본 연구는 향후 유방암 진단 시스템에 적용될 적절한 정합 액체를 선정하고, 성능을 분석하는데 유용하게 적용될 수 있다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권7호
• /
• pp.305-310
• /
• 2002

The microwave dielectric properties of Ba(Mg$_{1}$3/Ta$_{2}$3/O$_3$-Ba(Co$_{1}$3/Nb$_{2}$3/O$_3$[BMT-BCN] ceramics were investigated. The specimens were prepared by the conventional mixed oxide method with the sintering temperature of 15$25^{\circ}C$~1575$^{\circ}C$. It was found that Ba(Mg$_{1}$3/Ta$_{2}$3/O$_3$[BMT] and BCN formed a solid solution with complex perovskite structure. As increasing the mole fraction of BCN, dielectric constant increased while the temperature coefficient of resonant frequency was changed from positive to negative value. The highest value of quality factor, Q$\times$f$_{0}$=138,205GHz, obtained in the 0.9BMT-0.1BCN ceramics sintered at 1575$^{\circ}C$. In the range of x$\geq$0.4, the dielectric constant was about 30. The 0.55BMT-0.45BCN ceramics sintered at 15$25^{\circ}C$ for 5 hours showed the microwave dielectric properties of $\varepsilon$$_{r}$=30.21, Q$\times$f$_{0}$=85,789GHz and $\tau$$_{f}$=2.9015ppm/$^{\circ}C$.EX>.

• 대기
• /
• 제27권1호
• /
• pp.93-104
• /
• 2017

The effect of Advanced Microwave Sounding Unit-A (AMSU-A) observations on the short-range forecast in East Asia (EA) was investigated for the Northern Hemispheric (NH) summer and winter months, using the Forecast Sensitivity to Observations (FSO) method. For both periods, the contribution of radiosonde (TEMP) to the EA forecast was largest, followed by AIRCRAFT, AMSU-A, Infrared Atmospheric Sounding Interferometer (IASI), and the atmospheric motion vector of Communication, Ocean and Meteorological Satellite (COMS) or Multi-functional Transport Satellite (MTSAT). The contribution of AMSU-A sensor was largely originated from the NOAA 19, NOAA 18, and MetOp-A (NOAA 19 and 18) satellites in the NH summer (winter). The contribution of AMSU-A sensor on the MetOp-A (NOAA 18 and 19) satellites was large at 00 and 12 UTC (06 and 18 UTC) analysis times, which was associated with the scanning track of four satellites. The MetOp-A provided the radiance data over the Korea Peninsula in the morning (08:00~11:30 LST), which was important to the morning forecast. In the NH summer, the channel 5 observations on MetOp-A, NOAA 18, 19 along the seaside (along the ridge of the subtropical high) increased (decreased) the forecast error slightly (largely). In the NH winter, the channel 8 observations on NOAA 18 (NOAA 15 and MetOp-A) over the Eastern China (Tibetan Plateau) decreased (increased) the forecast error. The FSO provides useful information on the effect of each AMSU-A sensor on the EA forecasts, which leads guidance to better use of AMSU-A observations for EA regional numerical weather prediction.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.179-188
• /
• 2007

최근 건설 생산 현장에서 불량 레미콘의 반입 문제 및 콘크리트 구조물의 내구성 확보가 커다란 관심사로 대두되고 있으며, 이에 따라 일본 등의 선진 외국에서는 레미콘의 품질보증 및 관리를 위하여 다양한 굳지 않은 콘크리트의 단위수량 측정 기법이 개발되어 규준화를 도모하고 있다. 본 연구에서는 현재 국내 외에서 연구 개발되어 적용을 도모하고 있는 굳지 않은 콘크리트의 단위수량 측정 기법 중 실제 건설 생산 현장에서의 레미콘 입수검사시 적용이 가능할 것으로 판단되는 전자레인지법, 에어메터법 및 정전용량법을 선정한 후 I, II 시리즈에서는 결합재 종류, 잔골재 종류 및 함수율, 단위수량, 물결합재비에 따른 단위수량 추정 성능을 평가하였으며, III 시리즈에서는 사용 재료의 물성 변화가 굳지 않은 콘크리트의 단위수량 추정 오차 발생에 미치는 영향을 검토하였다. 이와 같은 연구 결과를 바탕으로 본 연구에서는 건설 생산 현장에서 레미콘의 품질관리에 굳지 않은 콘크리트의 단위수량 측정 기법을 실용화하기 위한 기초 자료를 제시하고자 하였다.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.384-390
• /
• 2021

This paper presents a wide-range tunable wavelength-locking technology based on optoelectronic oscillation (OEO) loops for optical fiber sensors and microwave photonics applications, explains the theoretical fundamentals of the design, and demonstrates a method for locking the relative wavelength differences between a leader semiconductor laser and its follower lasers. The input of the OEO loop in the proposed scheme (the relative wavelength difference) determines the radio-frequency (RF) signal frequency of the oscillation output, which is quantized into an injection current signal for feedback to control the wavelength drift of follower lasers so that they follow the wavelength change of the leader laser. The results from a 10-hour continuous experiment in a field environment show that the wavelength-locking accuracy reached ±0.38 GHz with an Allan deviation of 6.1 pm over 2 hours, and the wavelength jitter between the leader and follower lasers was suppressed within 0.01 nm, even though the test equipment was not isolated from vibrations and the temperature was not controlled. Moreover, the tunable range of wavelength locking was maintained from 10 to 17 nm for nonideal electrical devices with limited bandwidth.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 추계 기술심포지움 논문집
• /
• pp.23-27
• /
• 2000

Simultaneous Switching Noise (SSN) propagated through parallel power and ground planes in high-speed multilayer printed circuit boards (PCBs) causes malfunction of both digital and analog circuits. To reduce SSN, decoupling capacitors are generally used in the PCBs. In this paper, we improve the equivalent circuit model of decoupling capacitor in high-frequency range to analyze the effect of SSN reduction accurately. The analysis is performed by the microwave and RF design system (MDS) method and the finite difference time domain (FDTD) method. We compared the results by the ideal capacitor model with those by the proposed model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.308-310
• /
• 1997

In this paper, to anlayze electromagnetic distribution, measure the variation of relative permittivity of Glass-epoxy substrate for Computer-main-board and Tenon substrate for handphone or PCS in the frequency range $100[MHz]{\sim}1[GHz]$, in room temperature. To measure relative permittivity, suggested the Microstripline method. As the frequency increase, the variation of relative permittivity of Glass-epoxy is bigger than Tefoln's. And simulate the electromagnetic distribution on the PCBs in the infinite region applying the open boundary condition with these results by Finite Element Method.

• ETRI Journal
• /
• 제35권4호
• /
• pp.718-721
• /
• 2013

This letter proposes a novel calibration method for a multiport amplifier (MPA) to achieve optimum port-to-port isolation by correcting both the amplitude and phase of the calibration signals. The proposed architecture allows for the detection of the phase error and amplitude error in each RF signal path simultaneously and can enhance the calibrated resolution by controlling the analog phase shifters and attenuators. The designed $2{\times}2$ and $4{\times}4$ MPAs show isolation characteristics of 30 dB and 27 dB over a frequency range of 19.5 GHz to 22.5 GHz, respectively.