• 한국식품영양과학회지
• /
• 제25권4호
• /
• pp.659-664
• /
• 1996

밀감 가공부산물에서 추출한 펙틴의 특성을 조사한 결과 알콜불용성 고형물(ASS)의 함량은 albedo층이 18.1%로 가장 높고, pulp가 5.7%로 가장 낮았다. AIS 구성 다당류 중 펙틴은 pulp와 albedo층이 각각 40.5% 및 35.2%로 구성되어 있어 펙틴 추출용으로서 좋은 소재인 것으로 나타났다. 총 펙틴 함량은 부위에 따른 큰 차이를 보이지 않아 대체로 AIS에 대해 30% 내외 이었으나, 가용성 펙틴 중 염산 가용성 펙틴의 경우에는 flavedo층이 14.0%로 가장 높고, pulp가 4.4%로 가장 낮았으며, 염류 가용성 펙틴의 경우에는 pulp부위가 15%임 에 비해 과피는 7% 정도로서 부위에 따른 차이가 나타났다. 0.05N-HCI을 사용하여 $85^{\circ}C의$ 열탕에서 펙틴을 추출한 결과 60분의 가열처리로 90%이상의 펙틴이 용출되었으며, microwave의 경우 5분간 2회 조사시킴에 의해 90% 정도 추출되었으나 부위별에 따른 차이는 크지 않았고, 이들 펙틴의 에스테르화도에 있어서는 microwave 처리구의 것이 다소 높은 값을 나타내었다. 추출 펙틴의 중성 당 조성을 조사한 결과 rhamnose, arabinose, galactose, glucose 및 xylose로 구성되고 있고, 이중 galactose가 60~78% 정도를 차지한 반면 xylose는 5% 이하이었다. 펙틴의 분자량 분포를 Sepharose CL-4B를 이용, gel permeation chromatography로 조사한 결과 부위별에 따른 큰 차이는 보이지 않았으나 pulp의 경우 분리 피크가 2개로 나타나 pulp를 구성하는 펙틴은 분자량이 높은 것과 이보다 낮은 두 group으로 구성되어져 있음을 알 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 추계학술발표강연 및 논문개요집
• /
• pp.28-28
• /
• 1999

• 방사선산업학회지
• /
• 제17권2호
• /
• pp.199-207
• /
• 2023

Since seeds can be directly used as food resources as well as for crop cultivation or preservation of genetic resources, it is essential to develop high-quality seed processing technology to increase agricultural productivity. Seed treatment means processing technologies of seeds through physical or chemical treatment processes from after harvesting seeds to before sowing of seeds to improve germination and growth rate, durability, and immunity, etc. Since chemical seed treatment technology using pesticides or plant growth regulators has problems of environmental pollution and human toxicity, it is desired to develop an alternative technology. As a physical seed treatment method, various technologies such as ionizing radiation, plasma, microwave, and magnetic field are being developed, and some of them are being used practically. In this paper, I will summarize the mechanism of seed priming and disinfection, and the advantages and disadvantages of application, focusing on these physical seed treatment methods. Low dose or moderate intensity ionizing radiation, microwave, low-temperature plasma, and magnetic field treatments often promoted seed germination and seedling growth. However, effective removal of direct seed pathogens at these treatment intensities appears to be difficult. And it has been shown that relatively high-dose electron beam treatment using low-energy electron beams kills microorganisms on the seed surface and hull layer while not damaging the inner tissue of the seed, and is also effectively used for seed treatment on a commercial scale. In order to put the physical seed treatment technology to practical use in Korea, it is necessary to develop an economical scale treatment device along with the development of individual treatment technology to each crop.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.547-550
• /
• 2001

Through matched filtering synthetic aperture radar (SAR) produces high-resolution imagery from data collected by a relative small antenna. While the impulse response obtained by the matched filter approach produces the best achievable signal-to-noise ratio, large sidelobes must be reduced to obtain higher-resolution SAR images. So, many enhancement methods of SAR imagery have been proposed. As a deconvolution method, the phase-extension inverse filtering is based on the characteristics of the matched filtering used in SAR imaging. It improves spatial resolution as well as effectively suppresses the sidelobes with low computational complexity. In the phase-extension inverse filtering, the impulse response is obtained from simulation with a point target. But in a real SAR environment, for example ERS-1, the impulse response is distorted by many non-ideal factors. So, in the phase-extension inverse filtering for a real SAR processing, the magnitudes of the frequency transfer function have to be compensated to produce more desirable results. In this paper, an estimation method to obtain a more accurate impulse response from a real SAR image is studied. And a compensation scheme to produce better performance of the phase-extension inverse filtering is also introduced.

• 한국수산과학회지
• /
• 제50권2호
• /
• pp.139-145
• /
• 2017

We evaluated the quality characteristics of Kimbugak prepared using a microwave oven or the oil-frying puffing method with different contents (0%, 15% and 30%) of Capsosiphon fulvescens in dried laver. Microwave-processed Kimbugak had lower crude fat content but higher levels of crude ash, crude protein, and minerals than that prepared by oil-frying; it also had higher hardness values. The redness of Kimbugak containing 30% C. fulvescens processed using either method was lower than the control group. In sensory evaluations, participants preferred Kimbugak containing 30% C. fulvescens puffed by oil-frying. These results indicate that Kimbugak puffed using the oil-frying method has the best quality characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3559-3571
• /
• 2015

This paper addresses the problem of signal acquisition with a sparse representation in a given orthonormal basis using fewer noisy measurements. The authors formulate the problem statement for randomly measuring with strong signal noise. The impact of white Gaussian signals noise on the recovery performance is analyzed to provide a theoretical basis for the reasonable design of the measurement matrix. With the idea that the measurement matrix can be adapted for noise suppression in the adaptive CS system, an adapted selective compressive sensing (ASCS) scheme is proposed whose measurement matrix can be updated according to the noise information fed back by the processing center. In terms of objective recovery quality, failure rate and mean-square error (MSE), a comparison is made with some nonadaptive methods and existing CS measurement approaches. Extensive numerical experiments show that the proposed scheme has better noise suppression performance and improves the support recovery of sparse signal. The proposed scheme should have a great potential and bright prospect of broadband signals such as biological signal measurement and radar signal detection.

• 한국식품영양과학회지
• /
• 제28권3호
• /
• pp.586-592
• /
• 1999

Microwave assisted extraction(MAE) is known as a more environmental friendly process with economic advantages in terms of less time, less solvent, less energy and less wastes than the current time consuming reflux method. It was applied to develop a rapid extraction method for soluble ginseng components that are major materials used for the processing of ginseng products. In a comparative study between pre established MAE(ethanol 60%, power 80 W, process time 4 min$\times$5) and current extraction method(ethanol 80%, temp. 85oC, time 8 hr$\times$5), MAE was more efficient than the current method to obtain an extract yield(soluble solid), but it was insufficient to extract individual ginsenosides, total phenols, reducing components and acidic polysaccharides. MAE with 80% ethanol by 5 times showed, however, that its extraction efficiency on soluble solid, crude saponin, major ginsenosides, and the other components was equal or superior to that of the current method, indicating that ethanol concentration is one of the critical parameters influencing the MAE process. The quality of ginseng extracts from MAE was assured by evaluating the corresponding standards and by comparing TLC and HPLC patterns with the control.

• 대한원격탐사학회지
• /
• 제20권1호
• /
• pp.47-55
• /
• 2004

We have constructed a level-1 processor to generate brightness temperatures using the direct-broadcast data from the passive microwave radiometer onboard Aqua satellite. Although 50-minute half-orbit data, called a granule, are being routinely produced by global data centers, to our knowledge, this is the first attempt to process 10-minute long direct-broadcast (DB) data. We found that the processor designed for a granule needs modification to apply to the DB data. The modification includes the correction to path number, the selection of land mask and the manipulation of dummy scans. Pixel-to-pixel comparison with a reference indicates the difference in brightness temperature of about 0.2 K rms and less than 0.05 K mean. The difference comes from the different length of data between 50-minute granule and about 10-minute DB data. In detail, due to the short data length, DB data do not always have correct cold sky mirror count. The DB processing system is automated to enable the near-real time generation of brightness temperatures within 5 minutes after downlink. Through this work, we would be able to enhance the use of AMSR-E data, thus serving the objective of direct-broadcast.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2606-2613
• /
• 2022

Spent resin often exceeds radiation limits for safe disposal, creating a need for commercial-scale treatment techniques to reduce resin radioactivity. In this study, the radiological safety of a commercialized spent resin treatment device with a treatment capacity of 1 ton/day was evaluated. The results confirm that the device is radiologically safe in the event of an accident. This device desorbs ¹⁴C from the spent resin, allowing disposal as low-level waste instead of intermediate-level waste. The device also reduces overall waste by recycling the extracted ¹⁴C. Potential accident scenarios were explored to enable dose assessments for both internal and external exposure while preventing further spillage of the device and processing the spilled resin. The scenarios involved the development of a surface fracture on the resin mixture separator and microwave systems, which were operated under pressure and temperature of 0-6 bar and 0-150 ℃, respectively. In the case of accidents with separator and microwave device, the maximum allowable working time of worker were derived, respectively, considering external and internal exposures. When wearing the respirator corresponding to APF 50, in the case of the microwave device accident scenario, the radiological safety was confirmed when the maximum worker worked within 132.1 h.

• Journal of Ceramic Processing Research
• /
• 제20권3호
• /
• pp.222-230
• /
• 2019

Microwave hydrothermal-assisted sol-gel method was employed to synthesize the Fe doped TiO2 photocatalyst. The morphological analysis suggests anatase phase nanoparticles of ~20 nm with an SBET area of 283.99 ㎡/g. The doping of Fe ions in TiO2 created oxygen vacancies and Ti3+ species as revealed through the XPS analysis. The reduction of the band gap (3.1 to 2.8 eV) is occurred by doping effect. The as-prepared photocatalyst was applied for removal of NOx under solar light irradiation. The doping of Fe in TiO2 facilitates 75 % of NOx oxidation efficiency which is more than two-fold enhancement than the TiO2 photocatalyst. The possible reason of enhancement is associated with high surface area, oxygen vacancy, and reduction of the band gap. Also, the low production of toxic intermediates, NO2 gas, is further confirmed by Combustion Ion Chromatography. The mechanism related NOx oxidation by the doped photocatalyst is explained in this study.