• 터널과지하공간
• /
• 제15권6호
• /
• pp.411-424
• /
• 2005

풍화작용은 심부에서 생성된 암석이 지표에서 파괴되고 변질되어 현재의 환경조건과 평형을 이루는 산물을 형성하는 과정이다. 본 연구에서는 국내에서 가장 분포면적이 넓은 화강암질암의 풍화단계별 시료를 채취하여 편광현미경관찰, X-선 회절분석, 전자현미경관찰, 화학분석, 물성시험등을 수행하였다. 실험결과에 의거하여 풍화에 의해 형성되는 2차광물, 특히 점토광물의 형성과정을 확인하였고, 풍화에 따른 암석의 공학적인 성질변화와 물성저하의 메카니즘을 규명하였다.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2520-2528
• /
• 2000

Mechanical and physical properties of composite materials make a great difference due to their cure process condition. In order to clarify the effect of cure process condition on the microscopic damage behavior and failure mechanism of Carbon/Epoxy composites, three point bend test has been performed. For this purpose, two kinds of specimens with single adhesive and multiple adhesive layers were prepared. For single adhesive layer, four different types of specimen were used, that is, non-sanding, sanding, cocured, laminated specimens. Three different types of specimen were also used for the multiple adhesive layer, non-sanding, sanding, cocured specimens. Acoustic emission technique has also been employed to monitor the damage progresses associated with each micro-failure mechanism. The characteristics of AE parameters associated with micro-failure mechanism of each specimen were discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.189-194
• /
• 2002

Many researches in the past have shown that a majority initial cracking in concrete are caused during early age period. Therefore, the close examination of early age concrete behavior under various stress conditions is necessary to fully understand the cracking mechanism of concrete. In this study early age cement paste specimen is axially strained up to 20% of its original length by laterally reinforcing it. This type of test is called "Tube Squash Test" and has been previously used to apply up to 50% axial strain on concrete. Microscopic analyses (XRD, FESEM, EDS and DSE/TG) are performed on 20% axially strained early age cement paste specimen. The analysis results show that the microscopic structures and material characteristics of 20% axially strained cement paste remained same as the unstrained cement paste.

• Advanced Composite Materials
• /
• 제18권1호
• /
• pp.77-93
• /
• 2009

This paper investigated the damage transition mechanism between the fiber-breaking mode and the fiber-avoiding crack mode when the fiber-length is reduced in the unidirectional discontinuous carbon fiber-reinforced-plastics (CFRP) composites. The critical fiber-length for the transition is a key parameter for the manufacturing of flexible and high-strength CFRP composites with thermoset resin, because below this limit, we cannot take full advantage of the superior strength properties of fibers. For this discussion, we presented a numerical model for the microscopic damage and fracture of unidirectional discontinuous fiber-reinforced plastics. The model addressed the microscopic damage generated in these composites; the matrix crack with continuum damage mechanics model and the fiber breakage with the Weibull model for fiber strengths. With this numerical model, the damage transition behavior was discussed when the fiber length was varied. The comparison revealed that the length of discontinuous fibers in composites influences the formation and growth of the cluster of fiber-end damage, which causes the damage mode transition. Since the composite strength is significantly reduced below the critical fiber-length for the transition to fiber-avoiding crack mode, we should understand the damage mode transition appropriately with the analysis on the cluster growth of fiber-end damage.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.183-188
• /
• 2015

Due to the miniaturization of semiconductor devices, their crystal structure on the nanoscale must be analyzed. However, scanning electron microscope-electron backscatter diffraction (EBSD) has a limitation of resolution in nanoscale and high-resolution electron microscopy (HREM) can be used to analyze restrictive local structural information. In this study, three-dimensional (3D) automated crystal orientation and phase mapping using transmission electron microscopy (TEM) (3D TEM-EBSD) was used to identify the crystal structure relationship between an epitaxially grown CdS interfacial layer and a $Cu(In_xGa_{x-1})Se_2$ (CIGS) solar cell layer. The 3D TEM-EBSD technique clearly defined the crystal orientation and phase of the epitaxially grown layers, making it useful for establishing the growth mechanism of functional nano-materials.

• Journal of Trauma and Injury
• /
• 제23권1호
• /
• pp.29-37
• /
• 2010

Purpose: Controversy exists regarding whether pediatric blunt abdominal trauma patients with microscopic hematuria should undergo radiographic evaluation. Adult patients have indications such as shock and deceleration injury. This study was conducted to suggest indications for the use of CT to detect significant renal injury in pediatric blunt abdominal trauma patients with microscopic hematuria. Methods: From January 2005 to December 2009, patients less than 18 years of age with blunt abdominal trauma and microscopic hematuria who had undergone CT were included in this retrospective study. We analyzed the correlation between microscopic hematuria, shock, deceleration injury, and American Association for the Surgery of Trauma (AAST) renal injury grade. Patients were divided into two groups: the insignificant renal injury group (AAST grade 1) and the significant renal injury group (AAST grades 2-5). We compared age, gender, mechanism of injury, degree of microscopic hematuria, evidence of shock, presence of deceleration injury, and associated injuries between the two groups. We analyzed the effect of each of the above each factors on renal injury by using a logistic regression analysis. Results: Forty-three children were included, and the median age was 15 years. Five children had a significant renal injury. No significant differences, except age and microscopic hematuria (more than 30 red blood cells per high power field (RBC/HPF), p = 0.005) existed between the insignificant and the significant injury groups. A positive correlation existed between renal injury and microscopic hematuria (rho = 0.406, p = 0.007), but renal injury was not correlated with shock and deceleration injury. In the multivariate regression analysis, microscopic hematuria was the only factor correlated with renal injury (p = 0.042). Conclusion: If a microscopic hematuria of more than 30 RBC/HPF exists, the use of CT should be considerd, regardless of shock and deceleration injury to detect significant renal injury in pediatric blunt abdominal trauma patients.

• Composites Research
• /
• 제13권4호
• /
• pp.1-10
• /
• 2000

SiC가 강화된 금속복합재료는 기존의 금속재료에 비하여 비탄성계수와 비강도가 높기 때문에 자동차 및 항공산업에 많은 응용이 기대되고 있다. 금속복합재료의 파손기구는 적용된 하중에 의한 미시적 손상의 축적에 의해 많은 영향을 받기 때문에 금속복합재료의 광범위한 응용을 위해서는 금속복합재료가 반복 하중을 받을 때 미시적 파손기구를 이해하는 것이 대단히 중요하다. 따라서 본 연구에서는 SiCp/A356 금속복합재료의 미시적 손상 축적을 모니터링 하기 위하여 초음파와 음향방출기법을 적용하였다. 반복하중의 증가에 따라 초음파의 속도와 감쇠의 변화는 각 미시적 손상기구에 따라 3영역으로 나눌 수 있었다. 또한 각 영역에서 발생하는 AE 신호의 특징은 초음파의 속도 및 감쇠 변화와 비교, 분석되었다.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.407-423
• /
• 2020

The pre-peak cyclic shear mechanism of two-order asperity degradation of rock joints in the direct shear tests with static constant normal loads (CNL) are investigated using experimental and numerical methods. The laboratory testing rock specimens contains the idealized and regular two-order triangular-shaped asperities, which represent the specific geometrical conditions of natural and irregular waviness and unevenness of rock joint surfaces, in the pre-peak cyclic shear tests. Three different shear failure patterns of two-order triangular-shaped rock joints can be found in the experiments at constant horizontal shear velocity and various static constant normal loads in the direct and pre-peak cyclic shear tests. The discrete element method is adopted to simulate the pre-peak shear failure behaviors of rock joints with two-order triangular-shaped asperities. The rock joint interfaces are simulated using a modified smooth joint model, where microscopic scale slip surfaces are applied at contacts between discrete particles in the upper and lower rock blocks. Comparing the discrete numerical results with the experimental results, the microscopic bond particle model parameters are calibrated. Effects of cyclic shear loading amplitude, static constant normal loads and initial waviness asperity angles on the pre-peak cyclic shear failure behaviors of triangular-shaped rock joints are also numerically investigated.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.577-595
• /
• 2023

A dynamic triaxial discrete element numerical model of lightweight soil was established using the discrete element method to study the microscopic mechanism of expanded polystyrene (EPS) particles in the soil under cyclic loading. The microscopic parameters of the discrete element model of the lightweight soil were calibrated depending on the dynamic triaxial test hysteresis curves. Based on the calibration results, the effects of the EPS particles volume ratio and amplitude on the contact force, displacement field, and velocity field of the lightweight soil under different accumulated strains were studied. The results showed that the hysteresis curves of lightweight soil exhibit nonlinearity, hysteresis, and strain accumulation. The strain accumulated in remolded soil is mainly tensile strain, and that in lightweight soil is mainly compressive strain. As the volume ratio of EPS particles increased, the contact force first increased and then decreased, and the displacement and velocity of the particles increased accordingly. With an increase in amplitude, the dynamic stress of the particle system increased, and the accumulation rate of the dynamic strain of the samples also increased. At 5% compressive strain, the contact force of the particles changed significantly and the number of particles deflected in the direction of velocity also increased considerably. These results indicated that the cemented structure of the lightweight soil began to fail at a compressive strain of 5%. Thus, a compressive strain of 5% is more reasonable than the dynamic strength failure standard of lightweight soil.

• 터널과지하공간
• /
• 제13권2호
• /
• pp.117-124
• /
• 2003

암석의 불균질성이 정적 인장강도에 미치는 영향을 평가하기 위해, 유한요소해석법과 파괴역학에 기초하여 제안된 수치해석기법을 사용하여 정적 일축인장시험을 가정한 암석 파쇄 과정을 해석하였다 정적 인장강도 는 미시적 인장강도를 가진 모델 시험편의 파쇄 과정으로부터 평가되었으며, 평가된 공시체 강도는 미시적 인장 강도의 최소치보다 약간 큰 값에 일치하였으며, 그 강도의 흩어짐은 균질성 계수가 증가합에 따라 감소하였다. 본 해석 결과들로부터 암석 불균질성이 정적 인장강도에 미치는 중요한 요인임을 지적할 수 있었다.