• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.91-109
• /
• 2001

The purpose of this study is to evaluate histologically the resorption and tissue response of various resorbale membranes used for guided tissue regneration procedures, using a subcutaneous model on the dorsal surface of the rat. In this study, 12 Sprague-Dawley male rats(mean BW 150gm) were used and the commercially available materials included dense collagen membrane, freeze-dried bovine dura mater loos collagen membrane, PLA/PLGA membrane. Animals were sacrificed at 3, 6 and 8 weeks after implantation of various resorbable membranes. Specimens were prepared with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows: 1. Resorption : Loose collagen membrane group was resorbed most rapidly. Dense collagen membrane group and freeze-dried bovine dura mater group were rarely resorbed. 2. Inflammatory reactions : PLA/PLGA membrane group showed persistent and severe inflammatory reactions for 3 to 8 weeks. Moderate inflammatory reactions and the ectopic formation of calcified material were observed in dense collagen membrane group. Freeze-dried bovine dura mater group and loose collagen membrane group showed mild inflammatory reactions 3. In PLA/PLGA membrane group, multinucleated giant cells by foreign body reactions were observed. In conclusion, the resorption of freeze-dried bovine dura mater didn't happen for 3-6weeks, which showed the best bio-compatibility. Therefore, freeze-dried bovine dura mater was considered proper resorbable membrane for guided tissue regeneration.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.113-127
• /
• 2002

The purpose of this study is to evaluate histologically the tissue response and resorption of various nonresorbable and resorbable suture materials used for periodontal surgery, using a subcutaneous model on the dorsal surface of the rat. In this study, 10 Sprague-Dawley male rats (mean BW 150gm) were used and the commercially available materials included polyglactin 910, pain gut, nylon, e-PTFE. Animals were sacrificed at 3 days, 1, 2 and 4 weeks after implantation of various nonresorbable and resorbable suture materials. Specimens were prepared with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows: 1. Resorption : The resorption of plain gut was showed at 1 week after implantation, was lost their structure and almost resorbed at 4 weeks. The resorption of polyglactin 910 was started at 2 weeks and slowly absorbed untill 4 weeks. 2. Tissue response : Plain gut showed persistent and severe inflammatory reactions from 3 days to 4 weeks. Polyglactin 910, e-PTFE and nylon showed mild inflammatory reactions. Suture material should be biocompatible and be able to be functioned until tissue tensile strength reaches maximum level. In this study, polyglactin 910, nylon and e-PTFE are considered to be proper suture materials for periodontal surgery.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.17-27
• /
• 2006

Car following model is a theory that examines changes of condition and interrelationship of acceleration deceleration. headway, velocity and so on closely based on the hypothesis that the Posterior vehicle always follows the preceding vehicle. Car following mode) which is one of the research fields of microscopic traffic flow was first introduced in 1950s and was in active progress in 1960s. However, due to the limitation of data gathering the research depression was prominent for quite a while and then soon was able to tune back on track with development in global positioning system using satellite and generalization of computer use. Recently, there has been many research studies using reception materials of global Positioning system(GPS). Introducing GPS technology to traffic has made real time tracking of a vehicle position possible. Position information is sequential in terms of time and simultaneous measurement of several vehicles in continuous driving is also practicable. Above research was focused on judging whether it is feasible to overcome the following model research by adopting the GPS reception device that was restrictively proceeded due to the limitation of data gathering. For practical judgment, we measured the accuracy and confidence level of the GPS reception devices material by carrying out a practical experiment. Car following model is also being applied in simulations of traffic flow analysis, but due to the difficulty of estimating parameters the basis of the above result. it is our goal to produce an accurate calibration of car following model's parameters that is suitable in this domestic actuality.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.725-731
• /
• 2009

Background: Lobectomy and more extended anatomic resection are regarded as standard treatment for stage Ia non-small cell lung cancer, but approximately 15~40% of patients suffer from treatment failures such as cancer recurrence or death. The authors analyzed types and causes of treatment failures in surgically treated cases of stage Ia non small cell lung cancer. Material and Method: We retrospectively reviewed the medical records of 156 patients who had undergone complete resection for stage Ia NSCLC between Jan 1992 and Aug 2005. Patients were divided into two different treatment failure groups: cancer-related deaths and non-cancer-related deaths. Risk factors were analyzed in each group by the Kaplan-Meyer survival method and the Cox proportional hazard model. Result: Among the 156 patients, 93 were males; the mean age was 61. The median follow-up period was 33.8 months. The 5 year survival rate was 87.6%. Microscopic lympho-vascular permeation was reported in 10 patients. Recurrence was reported in 19 patients and 12 patients died due to recurrent lung cancer. Noncancer related deaths occurred in 16 patients. Risk factors for cancer recurrence and cancer related death were microscopic lympho-vascular permeation (HR=6.81, p=0.007, HR=7.81, p<0.001); for non-cancer related death, risk factors were pneumonectomy (HR=25.92, p=0.001) and postoperative cardiopulmonary complications (HR=29.67, p=0.002). Conclusion: After complete resection of stage Ia non small cell lung cancer patients, mortality includes not only cancer related deaths but also cancer unrelated deaths. Adjuvant chemotherapy is advised for patients who show microscopic lympho-vascular permeation, which is a risk factor for recurrence and for cancer related death. Patients who had pneumonectomy or who suffered from cardiac or respiratory complications need meticulous care in order to reduce comorbidity-induced death.

• Journal of Chest Surgery
• /
• v.37 no.2
• /
• pp.113-118
• /
• 2004

The studies on cryopreserved arterial allograft have been focused on cooling methods, pre-treatment, cryoprotectant agents, and preservation temperature. But recently, several studies have reported that thawing methods also play an important role in the occurrence of macroscopic and microscopic cracks. This study was designed to investigate the cell injury after thawing, using a rabbit model to clarify the effect of thawing methods on cryopreserved arteries. Material and Method: Segments of the rabbit aorta were obtained and divided into 3 groups (n=60) according to whether the specimens were fresh (control, n=20), cryopreserved and rapidly thawed (RT) at 37$^{\circ}C$ (n=20), or cryopreserved and subjected to controlled, automated slow thawing (ST)(n=20). Cell damage was established using the TUNEL method and the morphological changes were also evaluated. Result: In the group that was rapidly thawed, the expression of TUNEL (＋) cells increased significantly more than in the slowly thawed group. In addition, the endothelial denudation, microvesicles and edema were significant in the rapidly thawed group compared with those changes in the slowly thawed group. Conclusion: Our study suggests that the rapid thawing method may be one of the major causes of cellular damage and delayed rupture in cryopresewed arterial allografts. The expression of TUNEL (＋) cells and structural changes were significantly low in the slowly thawed group, which might have contributed to the improvement of graft failure after transplantation.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.415-426
• /
• 2006

In this study, the changes in the degree of conversion (DC) and the microtensile bond strength (MTBS) of self-etching adhesives to dentin was investigated according to the time after curing. The MTBS of Single Bond (SB, 3M ESPE, USA), Clearfil SE Bond (SE, Kuraray, Japan), Xeno-III (XIII, Dentsply, Germany), and Adper Prompt (AP, 3M ESPE, USA) were measured at 48h, at 1 week and after thermocycling for 5,000 cycles between 5$^{\circ}$C and 55$^{\circ}$C. The DC of the adhesives were measured immediately, at 48h and at 7 days after curing using a Fourier Transform Infra-red Spectrometer. The fractured surfaces were also evaluated with scanning electron microscope. The MTBS and DC were significantly increased with time and there was an interaction between the variables of time and material (MTBS, 2-way ANOVA, p = 0.018; DC, Repeated Measures ANOVA, p < 0.001). The low DC was suggested as a cause of the low MTBS of self-etching adhesives, XIII and AP, but the increase in the MTBS of SE and AP after 48h could not be related with the changes in the DC. The microscopic maturation of the adhesive layer might be considered as the cause of increasing bond strength.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.264-279
• /
• 2005

Statement of problem. Intraoral corrosion not only affects the esthetic and function of metallic dental restoration, but also has biologic consequences as well. Therefore, corrosion is considered a primary factor when choosing the dental alloy and laboratory technique. Purpose. The objective of this study was to compare the effects of solder and laser weld on corrosion Material and methods. Test specimens were made of 2 types of gold alloys, Co-Cr and Ni-Cr alloy and fabricated 3 methods, respectively: as cast, solder, and laser weld. For the analysis of corroding properties, potentiodynamic polarization test and immersion test conducted. The potentiodynamic polarization scan curve were recorded in 0.9% NaCl solution(pH 7) using Potentiostat/Galyanostat Model 273A. All specimens were exposed to 0.9% NaCl solution(pH 2.3) during 14 days. Elemental release into corrosive solution was measured by atomic emission spectrometry Differences in corrosion potential and mass release were determined using ANOVA. Results and conclusion. Through analyses of the data, following results were obtained. 1. In Pontor MPF and Wiron 99, corrosion potential of the solder group was statistically lower than as cast and laser weld group (p<0.05) , but there was no difference between corrosion potential of solder group and laser weld group in Pontor MPF and no differences between as cast and laser weld group (p>0.05). In Jel-Bios 10 and Wirobond, there was no difference of corrosion potential according to joining methods(p>0.05). 2. In all tested alloys, the amount of released metallic ion was greatest in the solder group(p<0.05). There was no difference between as cast group and laser weld group in Jel-Bios 10 and Wirobond(p>0.05). 3. In scanning electron microscopic examination. except soldered Wiron 99 specimens, it is impossible to discriminate the corrosive property of solder and laser weld. 4. Under the this experimental circumstances, laser weld appears superior to the solder when corrosion is considered.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.107-112
• /
• 2009

STATEMENT OF PROBLEM. Macroscopic and especially microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Dental implants with modified surfaces have shown stronger osseointegration than implants which are only turned (machined). Advanced surface modification techniques such as anodic oxidation and Ca-P application have been developed to achieve faster and stronger bonding between the host bone and the implant. PURPOSE. The purpose of this study was to investigate the effect of surface treatment of titanium dental implant on implant stability after insertion using the rabbit tibia model. MATERIAL AND METHODS. Three test groups were prepared: sandblasted, large-grit and acid-etched (SLA) implants, anodic oxidized implants, and anodized implants with Ca-P immersion. The turned implants served as control. Twenty rabbits received 80 implants in the tibia. Resonance frequencies were measured at the time of implant insertion, 2 weeks and 4 weeks of healing. Removal torque values (RTV) were measured 2 and 4 weeks after insertion. RESULTS. The implant stability quotient (ISQ) values of implants for resonance frequency analysis (RFA) increased significantly (P <. 05) during 2 weeks of healing period although there were no significant differences among the test and control groups (P >. 05). The test and control implants also showed significantly higher ISQ values during 4 weeks of healing period (P < .05). No significant differences, however, were found among all the groups. All the groups showed no significant differences in ISQ values between 2 and 4 weeks after implant insertion (P >. 05). The SLA, anodized and Ca-P immersed implants showed higher RTVs at 2 and 4 weeks of healing than the machined one (P < .05). However, there was no significant difference among the experimental groups. CONCLUSION. The surface-modified implants appear to provide superior implant stability to the turned one. Under the limitation of this study, however, we suggest that neither anodic oxidation nor Ca-P immersion techniques have any advantage over the conventional SLA technique with respect to implant stability.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.401-411
• /
• 2015

This study was performed to investigate the wound healing effect of skin regeneration cosmetics utilizing low molecular weight Polydeoxynucleotide (PDRN). High purity PDRN was prepared from salmon testes poly-deoxy-ribonucleotide through protein and toxin removal process and molecular weight reduction. In order to evaluate the wound healing effect of PDRN in SD rats, 4 sites of dorsal skin of each animal were excised by using biopsy punch and $500{\mu}L$ of test solution was topically applied once daily for 4 weeks. The tissue changes were observed for every week during the application periods. After applying the PDRN to the wound, the skin was cut flower and contraction of the wounds more quickly, and the coating of PDRN in the wound area was reduced significantly as compared to the positive control group $Fucidin^{(R)}$ applied. The microscopic observation of stained tissue showed that a positive control was most rapid in re-epithelialization ability followed by the PH group, PDRN group, HA group. In addition, transforming growth factor ($TGF-{\beta}$) and vascular endothelial growth factor (VEGF), such as in the growth factor was similar to the results of staining of tissue lesions. In conclusion, it is determined that the low molecular weight PDRN has the therapeutic effect to the wound, and could be used as a functional material of cosmetics and medical industries.

• Journal of Chest Surgery
• /
• v.32 no.7
• /
• pp.637-647
• /
• 1999

Background: Ischemia-reperfusion injury is one of the major contributing causes of early graft failure in lung transplantation. It has been suggested that triiodothyronine (T3) may ameliorate ischemia-reperfusion injury to various organs in vivo and in vitro. Predicting its beneficial effect for ischemic lung injury, we set out to demonstrate it by administering T3 into the in situ canine ischemia-reperfusion model. Material and Method: Sixteen adult mongrel dogs were randomly allocated into group A and B. T3 $(3.6\mug/kg)$ was administered before the initiation of single lung ischemia in group B, whereas the same amount of saline was administered in group A. Ischemia was induced in the left lung by clamping the left hilum for 100 minutes. After reperfusion, various hemodynamic parameters and blood gases were analyzed for 4 hours while intermittently clamping the right hilum in order to allow observation of the injured left lung function. Result: Arterial oxygen partial pressure $(PaO_2)$ decreased 30 minutes after reperfusion and recovered gradually thereafter in both groups. In group B the decrease of $PaO_2$ was less marked than in group A. The recovery of $PaO_2$ was faster in group B than in group A. The differences between the two groups were statistically significant from 30 minutes after reperfusion $(125\pm34$ mmHg and $252\pm44$ mmHg, p<0.05) until the end of the experiment $(178\pm42$mmHg and $330\pm37$ mmHg, p<0.05). The differences in the arterial carbon dioxide pressure, airway pressure and lung compliance showed no statistical significance. The malondialdehyde (MDA) level, measured from the tissue obtained 240 minutes after reperfusion, was lower in group B $(0.40\pm0.04\mu$M) than in group A $(0.53\pm0.05\mu$M, p<0.05). The ATP level of group B $(0.69\pm0.07\mu$M/g) was significantly higher than that of group A $(0.48\pm0.07\mu$M/g, p<0.05). The microscopic exami nation revealed varying degrees of injury such as perivascular neutrophil infiltration, capillary hemorrhage and interstitial congestion. There were no differences in the microscopic findings between the two groups. CONCLUSION T3 has beneficial effects on the ischemic canine lung injury including preservation of oxygenation capacity, less production of lipid peroxidation products and a higher level of tissue ATP. These results suggest that T3 is effective in pulmonary allograft preservation.