• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1322-1326
• /
• 1997

Characteristics of viscosity and spray dried particles for several polysaccharides were studied to investigate the possibilities as wall materials for microencapsulation. Viscosities of 10% maltodextrin, 10% gum arabic, 10% dextran, 1% gum locust bean, and 1% gum karaya were 2.2 mPa.s, 9.2 mPa.s, 13.0 mPa.s, 4660.0 mPa.s, and 77.0 mPa.s, respectively. In scanning electron micrographs for spray dried polysaccharides, gum arabic had spherical shapes at 20% and 30% emulsion concentration, while trailed shapes at 40%. Maltodextrin had uniform spherical shapes at 30%, while aggregated form with various kinds of capsule sizes at 40%. Dextran had spherical shapes at 20%, while trailed fibrous shapes at over 30%. Mixed polysaccharides with gum arabic:maltodextrin (1:3, w/w) had uniform spherical shapes at 20%, 30%, and 40% with increasing diameter with increasing concentration.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.241-245
• /
• 2007

The residual stress in axial stress in the axial direction of the steel filaments has been measured by using a method based on the combination of the focused ion beam (FIB) and high resolution strain mapping program (VIC-2D). That is, the residual stress was calculated from the measured displacement field before and after the introduction of a slot along the steel filaments. The displacement was obtained by the digital correlation analysis of high-resolution scanning electron micrographs, while the slot was introduced by FIB milling with low energy beam. The present measurement revealed that the residual stress within 8% of the magnitude was persistent in the steel filaments fabricated.

• Parasites, Hosts and Diseases
• /
• v.21 no.1
• /
• pp.75-82
• /
• 1983

An electron microscopic study was performed to know the basic tegumental structure of Cysticercus cellulosae. The scolex and bladder portions of cysticerci (human and porcine strains) were prepared for transmission and scanning electron microscopy by conventional procedures. In general, the tegument of C. cellulosae showed the basic ultrastructure of cestode tegument on electron micrographs. The teguments of both scolex and bladder portions consisted of such components, i.e., an outer vesicular layer with numerous microtriches and inner filroug layer. Below the fibrous layer, there were layers of muscle bundles and tegumental cells. The microtriches which covered the surface of cysticercus revealed two distinctly different shapes. The characteristic bladder-like, elongated pyramid shaped "tetrahedrial form" was observed on the surface of the scolex portion, whereas the elongated cylindrical "filamentous form" was distributed on the stirface of bladder portion. In spite of the difference of isolated host and location, the cysticerci showed tole same result. But dimensional variations of the tegument according to topography of the worm were observed. The possibility of application in making differential diagnosis from other larval cestodes and possible functions of this larval tegument were discussed.

• The Plant Pathology Journal
• /
• v.22 no.3
• /
• pp.230-234
• /
• 2006

Tomato spotted wilt virus (TSWV) has been identified in commercial chrysanthemum cultivars in Korea. Nucleotide sequences of the N gene of TSWV-ch14 isolated from infected chrysanthemum were determined and deposited in GenBank under accession no. DQ453158. The symptoms consisted of dark colored leaf necrosis, black streaks along the stem, wilting of plant parts in 'Sinma'; and chlorotic spots, necrosis of axillary shoots and withering of leaves in 'Hwarang'. Electron micrographs of leaf preparation of Nicotiana rustica infected with TSWV-ch14 contained spherical particles around 85 nm in diameter. TSWV was identified from chrysanthemum by sequence determination of N nucleocapsid protein and virion observation by transmission electron microscope. This is the first reported observation on TSWV in chrysanthemum in Korea.

• 한국문화재보존과학회:학술대회논문집
• /
• 2006.11a
• /
• pp.11-15
• /
• 2006

This work aims to clarify the character and selection of repair papers, based on fibre orientation information of paper cultural properties under restoration; using nondestructive image analysis applied to micrographs of paper surfaces. Image analysis using fast Fourier transform with suitable modifications was demonstrated to be an effective means to determine angle and intensity of fiber orientation as a nondestructive method. In the case of contemporary repair papers, the Japanese handmade paper exhibited a high anisotropy value, while the Korean handmade papers exhibited low anisotropy values. Korea and Japanese traditional hand making papers were well distinguished. Korea and Japanese papers made in the traditional ways showed its own characteristic orientation behavior in accordance with the motion of a bamboo wire.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1086-1090
• /
• 2001

Composition effects on microstructure and metallizing properties of the alumina sintered body were evaluated to develop the metallized alumina tubes having superior properties for electronic devices. SEM observation revealed that resultant micrographs and fractographs were varied with composition chance of additives and $SiO_2$-rich specimens showed better microstructural characteristics with uniform distribution of fine and round particles than other CaO-rich or MgO-rich ones. The resultant interfacial microstructure of the $SiO_2$-rich metallized alumina tubes also showed good metallizing properties with no defects between layers and uniform thickness of metallizing layer.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.134-139
• /
• 1995

We produced $(Co_{93}Cr_{7})-P-Ni$ thin films for longitudinal magnetic recording media using OC magnetron sputtering system The variation of magnetic properties of $(Co_{93}Cr_{7})-P-Ni$ pseudo-ternary system with the composition was examined. We obtained the coercivity up to 1500 Oe. The coercivity iocrease could be ascribed to in-plane anisotropy enhaocement, grain size decrease, magnetic decoupling between particles. TEM micrographs showed that the grains were well-decoupled by the addition of phosphorous.

• Tribology and Lubricants
• /
• v.6 no.1
• /
• pp.108-115
• /
• 1990

Wear diagrams, which are the three dimensional representations of the dependence of the wear rate on the applied pressure and the sliding speed, were constructed with the pin on ring type wear test results using 52100 wear couples. The pressure and speed ranges from 0.45 MPa to 45.30 MPa and from 0.012 m/sec to 0.12 (0.120)m/sec, respectively. The results show the mild to severe transition, which suggests the change of the wear mechanisms as a function of the pressure and sliding speed. The SEM micrographs of the corresponding worn area shows clearly that different wear mechanisms dominate.

• Tribology and Lubricants
• /
• v.19 no.1
• /
• pp.31-35
• /
• 2003

This paper reports the studies on the wear-corrosion behavior of ductile cast iron in the various pH environments. In the variety of pH solutions, corrosion and wear-corrosion loss of GCD 600 were investigated. Also, the anodic polarization test of GCD 600 using potentiostat/galvanostat was carried out. And rubbed surface of GCD 60 using scanning electron micrographs after immersion and wear-corrosion test was examined in the environment of various pH values. The main results are as following In alkali zone, the wear-corrosion loss of GCD 600 increases, but corrosion loss decreases. The unevenness and crack of wear-corrosion surface in neutral zone becomes duller than that in alkali zone. As the corrosive environment is acidified, wear-corrosion behavior of GCD 600 with passing immersion time becomes sensitive.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1583-1586
• /
• 2011

Silver nanoparticles (<10 nm) were prepared in ultrasonic vibration-induced nanodroplets of isopropyl alcohol (IPA) in combination with hydrophobic room temperature ionic liquids (RTILs). The Ag-precursor used were silver (I) complex, Ag$_2$(ehac)$_2$(eha)$_2$ (ehac = 2-ethylhexylammonium carbamate; eha = 2-ethylhexylamine), in IPA, while 1-butyl-3-methylimidazolium-based ionic liquids bearing $SbF_6^-$, $PF_6^-$ and $NTf_2^-$ as counter anions were used as RTILs. During sonication for 10-90 min at room temperature, uniform silver nanoparticles with mean sizes of 2 to 8 nm were rapidly synthesized. Transmission electron micrographs also confirmed that silver nanoparticles have a spherical shape and diverse sizes depending on the reaction time (10-90 min).