• 대한화장품학회지
• /
• 제20권1호
• /
• pp.52-63
• /
• 1994

4성분계 o/w 형 microemulsion의 안정성과 유동특성에 비이온 계면활성제와 보조계면 활성제의 혼합비가 미치는 영향을 연구하였다. 비이온 계면활성제와 보조계면 활성제의 혼합비에서 계면활성제의 양이 증가함에 따라 입자의 크기가 작아졌고, 경시안정성이 양호하였으며, 이 때의 혼합비는 20/40 - 30/30으로 나타났다. Rheogram을 통하여 시료에는 일정한 내부구조가 형성됨을 의미하는 항복점이 존재함을 알 수 있었으며, 전단속도 증감 시 전단응력이 일치하지 않는 hysteresis를 나타내었다. hysteresis의 면적은 혼합비에서 계면활성제의 양이 많아짐에 따라 커졌으며 제조된 microemulsion은 rheopetic한 특성을 보였다.

• 한국응용과학기술학회지
• /
• 제17권3호
• /
• pp.167-173
• /
• 2000

The process variables for the manufacture of translucent microemulsion prepared with 2-octyl dodecanol, 12-hydroxy stearic acid cholesteryl , POE(40)HCO and 1,3-butandiol were examined initially (primary emulsion) and following aging for three months. The techniques empolyed in this study were particle size, turbidity, interfacial tension and microfluidizer. Particle size analysis and turbidity measurement to evaluate the emulsion stability were used. It was concluded that the process of the emulsification was an important indicator of the stability of the translucent microemulsion. From the particle size and and turbidity measurement of translucent microemulsion, adding the surfactant to the oil phase before the emulsification was found to be the most important factor for the stability of emulsions. We found that interfacial tension of the adding the surfactant to the oil phase is lower than that of the adding the surfactant to aqueous phase. In spite of hydrophilic surfactant, adding the surfactant to aqueous phase produced inferior emulsion to that to oil phase.

• 한국환경과학회지
• /
• 제7권6호
• /
• pp.875-881
• /
• 1998

Microemulsion is prepared by the method of phase inversion emulsification with d-limonene that is environmental friendly substance and nontoxic to human body as dispersed phase. Emulsifier used for preparation of microemulsion is nonionic surfactants, polyoxyethylene nonylphenyl ether. Stability of prepared microemulsion was estimated by the various method of ξ-potential, hydrodynamic diameter and electric conductivity. When d-limonene is emulsified by NP series, microemulsion is most stable and narrowly distributed at HLB value of 12.3(either one emulsifier or mixed emulsifiers). Stability of microemulsion is increased as the amount of emulsifiers is increased at same HLB value of 12.3. In the case of using the same amount of emulsifiers, number of produced micelle are relatively large as hydrodynamic diameter is small. Therefore, the state of microemulsion is stable and the electric conductivity is increased. One can determine that higher electric conductivity value means that microemulsion has more micelles and is more stable.

• 대한화장품학회지
• /
• 제18권1호
• /
• pp.132-149
• /
• 1992

이 논문은 외관, 안정도, 얇고 균일하게 끈적이지 않는 Film 형성 등의 우수한 특징을 갖고 있기 때문에 Cosmetic preparations의 여러 방면에 응용하고 있는 Microemulsion gel에 관한 것이다. 우리의 연구는 Microemulsion의 Clarifying agent 또는 Coupling agent로 이용되고 있는 Polyol류가 Microemulsion에 미치는 영향을 해명함으로써, Consistency, Stability, Clarity, Pick-up from a container등이 우수한 최적의 Microemulsion gel의 형성 조건을 확립하여 Cosmetic preparations에 응용할 수 있도록 하는 것이다. 연구한 System은 De-ionized water, Oil로는 Polar한 Ester oil, Emulsifying agent는 Nonionic syrfactant, Coupling agent는 Polyol로 구성하였으며, Three component phase diagram과 Tetrahedral phase diagram을 이용하여, Polyol의 비율에 따라 Microemulsion gel의 투명 영역, Consistency, 충격에 의한 Resonance 효과, Pick-up from a container등의 변화를 고찰하였다. 연구결과 구성 성분 중 De-ionized water의 Coupling agent의 비율변화에 의한 영향이 가장 크게 나타났으며, Coupling agent로 사용된 Glycerine의 물에 대한 비율이 63-75%일 때 최적 Microemulsion gel 형성 영역이 가장 넓게 나타났다. 특히 Polyol의 비율을 적절히 선택함으로써, 최근 관심이 모아지고 있는 최소의 유화제량으로 최대의 유상량을 함유한 Microemulsion gel을 얻는데 기여할 수 있을 것으로 생각된다.

• 한국응용과학기술학회지
• /
• 제19권3호
• /
• pp.167-173
• /
• 2002

The isoflavone as a derivatives of flavone is colorless crystalline compounds. It acts on synthesis of fibronectine, collagen III, collagen I in human normal fibroblast by same biological activity to animal hormone. In this study, we tried to search and demonstrate system content rate of dermal translocation system for cosmetics using microemulsion containing isoflavone. The results of microemulsion stability test by centrifugation, storage in incubator and circulation chamber showed that separation of phase did not appear after 30 days. By the skin flexibility test, it has confirmed efficiency and effect as cosmetics materials. As the result, the microemulsion showed that skin flexibility factor improved up to 7.6%. We could confirm that O/W type microemulsion was stable system.

• 약학회지
• /
• 제39권5호
• /
• pp.495-505
• /
• 1995

The O/W microemulsion systems were made from 2 or 4% (w/w) oil (soybean oil, olive oil or isopropyl myristate) and 10, 15 or 20% (w/w) Brij 96. They were compared with micellar solution of equivalent surfactant concentration m therms of physicochemical properties, and the solubilization of sudan IV. They were characterized by dynamic light scattering, stability, surface tension, viscosity and rheogram. The mean diameters of O/W microemulsion systems were 10-15nm, and those of Brij 96 micellar solutions were 18-19 nm. Both of them were monodisperse systems. The O/W microemulsion systems showed Newtonian flow and their apparent viscosities were lower than those of micellar solutions. The surface tensions of O/W microemulsion systems were increased or decreased depending on the types of oil used, when compared with those of micellar solutions. The O/W microemulsion systems were very stable, and did not show any flocculation or aggregation. Their mean diameters were not changed after three months. But oxidation was observed in microemulsions without nitrogen gas at high temperature. There was a significant improvement in the sudan IV solubffimtion in micromulsion compared with that m the micellar solution containing equivalent concentration of surfactant. The size distribution and mean diameters of O/W micromulsions were not changed when sudan IV was solubilized.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.44-50
• /
• 2003

We studied on the preparation and evaluation of O/W type microemulsion containing "wax, liquid paraffine and quaternary ammonium salt". And also it was obtained to stability of microemulsions by mono ethylene glycol(MEG) addition. The microemulsions were generally prepared at 96${\sim}$97$^{\circ}C$ by the phase inversion method. We used polyoxyethylene(20) sorbitan monooleate(POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C.) as the emulsifiers at microemulsion preparation. From the results, we could get best condition for microemulsion preparation, in case of oil phase, montanic ester wax ; 1.1wt%, paraffine wax ; 1.1wt%, liquid paraffine ; 3.1wt%, propylene glycol ; 0.6wt% and ethylene glycol monobutyl ether ; 0.6wt%, when the ratio(wt%) of D.D.A.C. and POE(20)SMO were 2 : 3. And also we could obtained that the distributed particle size of the final microemulsions were about 8${\pm}$1.5nm and the mean particle size was 7${\pm}$0.5nm. We got following results from final microemulsions that the percent of transmittance; 96${\sim}$98% at 700nm. And the microemulsion blended with MEG of 5${\sim}$15wt% showed smaller particle size and more stable distribution than non-containing MEG.

• Journal of Pharmaceutical Investigation
• /
• 제16권2호
• /
• pp.68-71
• /
• 1986

Oil in water microemulsion which has many pharmaceutical applications was prepared and evaluated. As oil sources and emulsifier, two grades of oil and egg phosphatide were used, respectively. Vacuum high shear mixing and high pressure homogenizing were performed and in the homogenizing step, effect of the number of passes in the homogenizer on the stability of microemulsion was studied, using Coulter counter, photographic microscope and pH-meter. From above results, it was concluded that the stability of microemulsion made of refined soy-bean oil was better than that of food grade soybean oil and by five passes in the homogenizer at 6,000 psi, we could make stable microemulsion with average particle diameter below $1\;{\mu}m$, with no particle above $5\;{\mu}m$ and no significant change during 6 weeks stored.

• 대한화장품학회지
• /
• 제23권1호
• /
• pp.145-158
• /
• 1997

Lipid를 이용하여 보다 안정한 microemulsion을 제조함에 있어 Zeta potential을 이요하여 비교 분석 하여 보았다. 실험 시 Lipid Base와 Cetyl phosphate의 함량변화가 particle size와 zeta potential에 미치는 영향에 대하여 실험을 수행하였으며, zeta potetial의 시간 경과에 따른 경시변황 대하뎌도 조사하여 microemulsion의 적정조건을 찾을 수 있었다. microemulsion과 emulsion에 대하여 안전성을 비교 관찰 하였다.

• 한국재료학회지
• /
• 제34권7호
• /
• pp.315-320
• /
• 2024

In order to maximize the function and increase the compatibility of silicone hydrogel lens, this study compared and analyzed the properties of Amino modified silicone oil using mini and microemulsion technique, respectively. Optical and physical properties were evaluated by spectral transmittance, refractive index, water content, oxygen transmittance and contact angle measurements to evaluate the performance of the manufactured hydrogel lens. The spectral transmittance results revealed the copolymerization method lens showed 31 % of the visible light area, which did not satisfy the basic optical properties. However, the lens using the mini and microemulsion materials showed more than 90 % of the visible light area, satisfying the optical characteristics. In addition, all physical properties were superior to a basic hydrogel lens. The mini and microemulsion techniques effectively improved the stability and function of the ophthalmic hydrogel lens and are considered a promising ways of manufacturing an ophthalmic hydrogel contact lens with increased compatibility and stability.