• Journal of Microbiology and Biotechnology
• /
• v.31 no.5
• /
• pp.740-746
• /
• 2021

Efficient cellulolytic enzyme production is important for the development of lignocellulose-degrading enzyme mixtures. However, purification of cellulases from their native hosts is time- and labor-consuming. In this study, a constitutive expression system was developed in Penicillium oxalicum for the secreted production of proteins. Using a constitutive polyubiquitin gene promoter and cultivating with glucose as the sole carbon source, nine cellulolytic enzymes of different origins with relatively high purity were produced within 48 h. When supplemented to a commercial cellulase preparation, cellobiohydrolase I from P. funiculosum and cellobiohydrolase II from Talaromyces verruculosus showed remarkable enhancing effects on the hydrolysis of steam-exploded corn stover. Additionally, a synergistic effect was observed for these two cellobiohydrolases during the hydrolysis. Taken together, the constitutive expression system provides a convenient tool for the production of cellulolytic enzymes, which is expected to be useful in the development of highly efficient lignocellulose-degrading enzyme mixtures.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.2
• /
• pp.332-339
• /
• 2010

The lipase from Mucor racemosus NRRL 3631 was partially purified by fractional precipitation using 60% ammonium sulfate, which resulted in a 8.33-fold purification. The partially purified lipase was then immobilized using different immobilization techniques: physical adsorption, ionic binding, and entrapment. Entrapment in a 4% agar proved to be the most suitable technique (82% yield), as the immobilized lipase was more stable at acidic and alkaline pHs than the free enzyme, plus 100% of the original activity was retained owing to the thermal stability of the immobilized enzyme after heat treatment for 60 min at $45^{\circ}C$. The calculated half-lives (472.5, 433.12, and 268.5 min at 50, 55, and $60^{\circ}C$, respectively) and the activation energy (9.85 kcal/mol) for the immobilized enzyme were higher than those for the free enzyme. Under the selected conditions, the immobilized enzyme had a higher $K_m$ (11.11 mM) and lower $V_{max}$ (105.26 U/mg protein) when compared with the free enzyme (8.33 mM and 125.0 U/mg protein, respectively). The operational stability of the biocatalyst was tested for both the hydrolysis of triglycerides and esterification of fatty acids with glycerol. After 4 cycles, the immobilized lipase retained approximately 50% and 80% of its original activity in the hydrolysis and esterification reactions, respectively.

• Environmental Engineering Research
• /
• v.15 no.3
• /
• pp.157-161
• /
• 2010

Forest soils are often nitrogen-limited, and nitrogen input to forest soils can cause substantial changes in the structure and functions of a soil ecosystem. To determine the effects of nitrogen input on methane oxidation and the microbial enzyme activities, manipulation experiments were conducted using nitrogen addition to soil samples from Mt. Jumbong. Our findings suggested that the addition of nitrogen to the soil system of Mt. Jumbong did not affect the microbial enzyme activities. Conversely, the addition of nitrogen affected the rate of methane oxidation. Inorganic nitrogen in soils can inhibit methane oxidation via several mechanisms, such as substrate competition, toxic effects, and competition with other microbes, but the inhibitory effects are not always the same. In this research, seasonal changes were found to produce different inhibitory factors, and these different responses may be caused from differences in the methantrophic bacteria community structure.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.429-435
• /
• 1999

An adenosine 5'-monophosphate deaminase (AMP aminohydrolase, EC 3.5.4.6) was purified to homogeneity from the cell-free extract of Saccharomyces cerevisiae DKCTC7248. The molecular mass of subunit was estimated to be 80 kDa on SDS-PAGE, and that of the holoenzyme was shown to be 240 kDa by gel filtration. The isoelectric point of the enzyme (AMP deaminase D) was determined to be 6.2. The AMP deaminase D was specific towards AMP with an apparent $K_m$ value of 4.1 mM and a Hill coefficient, $n_H$, of 2.2. Both ATP and ADP were positive allosteric effectors of the AMP deaminase D: The apparent $K_{m}$ was decreased to 1.6 mM and 3.3 mM in the presence of 0.1 mM ATP and ADP, respectively, lowering $n_{H}$ to 1.0. Univalent cations like $K^+, Na^+ and Li^ +$ activated the enzyme but some divalent cations such as $Cu^{ 2+} and Cd^{2+}$ showed strong inhibitory effects. This enzyme displayed optimum activity at $30^{\circ}C$ and pH 7.0. In addition, it was stable up to $45^{\circ}C$ and over a wide pH range(pH 5.5-9.0). Amino acid sequences of its N-terminal region were analyzed to be ADYKMQMFADDA.

• Korean Journal of Food Science and Technology
• /
• v.49 no.2
• /
• pp.141-145
• /
• 2017

In this study, we evaluated the alcohol degradation ability of fig enzyme in the production of cheese using Lactobacillus kitasatonis, Lactobacillus amylophillus, and Leuconostoc mesenteroides sub. The strains were highly resistant to ethanol, acid, and bile acid. When 10% of fig enzyme was added, the alcohol dehydrogenase and aldehyde dehydrogenase activities in each strain were approximately 170, 270, and 190% higher, respectively, than in samples without fig enzyme. The addition of 10% of fig enzyme to produce cheese with the L. amylophillus strain showed an approximately 250% increase in alcohol dehydrogenase and aldehyde dehydrogenase degradation. In conclusion, when fig enzyme was added to produce cheese using L. amylophillus, high alcohol degradation ability was observed. The applicability of fig enzyme addition was confirmed for the production of functional food.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.2
• /
• pp.98-102
• /
• 1996

A thermostable tyrosine phenol-lyase gene of a thermophilic Symbiobacterium species was cloned and overexpressed in Escherichia coli in order to produce the biocatalyst for the synthesis of 3, 4-dihy-droxyphenyl-L-alanine (L-DOPA). The substrates used for the synthetic reaction were pyrocatechol, so-dium pyruvate, and ammonium chloride. The enzyme was stable up to $60^{\circ}C$, and the optimal temperature for the synthesis of L-DOPA was $37^{\circ}C$ . The optimal pH of the reaction was about 8.3. Enzyme activity was highly dependent on the amount of ammonium chloride and the optimal concentration was estimated to be 0.6 M. In the case of pyrocatechol, an inactivation of enzyme activity was observed at con-centrations higher than 0.1 M. Enzyme activity was increased by the presence of ethanol. Under op-timized conditions, L-DOPA production was carried out adding pyrocatechol and sodium pyruvate to the reaction solution intermittently to avoid substrate depletion during the reaction. The concentration of L-DOPA reached 29.8 g/l after 6 h, but the concentration didn t increase further because of the formation of byproducts by a non-enzymatic reaction between L-DOPA and pyruvate.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.1
• /
• pp.34-45
• /
• 2012

A thermophilic Bacillus stearothermophilus F1 produces an extremely thermostable serine protease. The F1 protease sequence was used to predict its three-dimensional (3D) structure to provide better insights into the relationship between the protein structure and biological function and to identify opportunities for protein engineering. The final model was evaluated to ensure its accuracy using three independent methods: Procheck, Verify3D, and Errat. The predicted 3D structure of F1 protease was compared with the crystal structure of serine proteases from mesophilic bacteria and archaea, and led to the identification of features that were related to protein stabilization. Higher thermostability correlated with an increased number of residues that were involved in ion pairs or networks of ion pairs. Therefore, the mutants W200R and D58S were designed using site-directed mutagenesis to investigate F1 protease stability. The effects of addition and disruption of ion pair networks on the activity and various stabilities of mutant F1 proteases were compared with those of the wild-type F1 protease.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.410-416
• /
• 2008

The gene SfXyn10, which encodes a protease-resistant xylanase, was isolated using colony PCR screening from a genomic library of a feather-degrading bacterial strain Streptomyces fradiae var. k11. The full-length gene consists of 1,437bp and encodes 479 amino acids, which includes 41 residues of a putative signal peptide at its N terminus. The amino acid sequence shares the highest similarity (80%) to the endo-1,4-${\beta}$-xylanase from Streptomyces coelicolor A3, which belongs to the glycoside hydrolase family 10. The gene fragment encoding the mature xylanase was expressed in Escherichia coli BL21 (DE3). The recombinant protein was purified to homogeneity by acetone precipitation and anion-exchange chromatography, and subsequently characterized. The optimal pH and temperature for the purified recombinant enzyme were 7.8 and $60^{\circ}C$, respectively. The enzyme showed stability over a pH range of 4.0-10.0. The kinetic values on oat spelt xylan and birchwood xylan substrates were also determined. The enzyme activity was enhanced by $Fe^{2+}$ and strongly inhibited by $Hg^{2+}$ and SDS. The enzyme also showed resistance to neutral and alkaline proteases. Therefore, these characteristics suggest that SfXyn10 could be an important candidate for protease-resistant mechanistic research and has potential applications in the food industry, cotton scouring, and improving animal nutrition.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.6
• /
• pp.905-912
• /
• 2007

A novel ${\beta}-glucosidase$ gene, bglA, was isolated from uncultured soil bacteria and characterized. Using genomic libraries constructed from soil DNA, a gene encoding a protein that hydrolyzes a fluorogenic analog of cellulose, 4-methylumbelliferyl ${\beta}-D-cellobioside$ (MUC), was isolated using a microtiter plate assay. The gene, bglA, was sequenced using a shotgun approach, and expressed in E. coli. The deduced 55-kDa amino acid sequence for bglA showed a 56% identity with the family 1 glycosyl hydrolase Chloroflexus aurantiacus. BglA included two conserved family 1 glycosyl hydrolase regions. When using $p-nitrophenyl-{\beta}-D-glucoside$ (pNPG) as the substrate, the maximum activity of the purified ${\beta}-glucosidase$ exhibited at pH 6.5 and $55^{\circ}C$, and was enhanced in the presence of $Mn^{2+}$. The $K_m\;and\;V_{max}$ values for the purified enzyme with pNPG were 0.16 mM and $19.10{\mu}mol/min$, respectively. The purified BglA enzyme hydrolyzed both pNPG and $p-nitrophenyl-{\beta}-D-fucoside$. The enzyme also exhibited substantial glycosyl hydrolase activities with natural glycosyl substrates, such as sophorose, cellobiose, cellotriose, cellotetraose, and cellopentaose, yet low hydrolytic activities with gentiobiose, salicin, and arbutin. Moreover, BglA was able to convert the major ginsenoside $Rb_1$ into the pharmaceutically active minor ginsenoside Rd within 24 h.

• Journal of Microbiology
• /
• v.41 no.1
• /
• pp.58-62
• /
• 2003

An extracellular pretense of Bacillus amyloliquefaciens S94 was purified to apparent homogeneity. The enzyme activity was strongly inhibited by general inhibitor for serine protease, PMSF, suggesting that the enzyme is a serine pretense. The purified enzyme activity was inhibited by leucine peptidase inhibitor, bestatin, suggesting that the enzyme is a leucine endopeptidase. The maximum proteolytic activity against different protein substrates occurred at pH 10, 45$^{\circ}C$ (protein substrate) and pH 8, 45$^{\circ}C$ (synthetic substrate). The purified enzyme was specific in that it readily hydrolyBed substrates with Leu or Lys residues at P$_1$ site. The pretense had characteristics of a cold-adapted protein, which was more active for the hydrolysis of synthetic substrate in the range of 15$^{\circ}C$ to 45$^{\circ}C$, specially at low temperature.