• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.332-336
• /
• 2009

초소형 전자소재 접착용 고분자 소재 접착제는 접착소재와 칩 또는 기판 간의 열팽창계수 차이에 의한 박리, 크래킹과 접착력 부족 등의 문제점이 발생된다. 이러한 결점의 보완을 위하여 무기입자 및 첨가물을 통해 접착제의 열팽창계수를 낮추거나, 접착제의 유연성을 부여하는 방법 등이 사용되고 있다. 실록산/실리카/에폭시 나노복합재에서 실록산과 실리카의 첨가가 열적, 기계적 물성에 미치는 효과를 확인하기 위한 실험을 진행하였다. 3-glycidoxypropyltrimethoxysilane(GPTMS)로 처리하여 친수성의 나노실리카 입자를 소수성 입자로 변성시켜 고분자 매트릭스와의 상용성 문제를 해결하고자 하였다. 표면처리하지 않은 실리카인 $Aerosil^{(R)}$200을 첨가한 AMS/Aerosil/에폭시 나노복합재의 유리전이온도는 125에서 $118^{\circ}C$로 감소하였고, 모듈러스는 2,225에서 2,523 MPa까지 증가하였다. 표면처리한 M-silica를 첨가한 AMS/M-silica/에폭시 나노복합재 또한 비슷한 경향이었으며, 유리전이온도가 124에서 $120^{\circ}C$로 감소했고 모듈러스는 1,981에서 2,743 MPa까지 증가하였다. 실리카의 표면개질 유무에 상관없이 열팽창계수는 감소하는 추세를 보였다.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1189-1196
• /
• 2018

7 type composites (40, 45, 50, 55, 60, 65, and 70 wt.%)were prepared for the environmentally friendly GIS Spacer. Five kinds of samples were prepared for optimization of the filler content ratio (MS: MA = 1: 9, 3: 7, 5: 5, 7: 3, 9: 1) of epoxy / microsilica and microalumina. As a result of evaluation of the partial discharge resistance characteristic, surface erosion is generally slowed down as the fill amount of micro silica is increased. Also, partial discharge resistance characteristics for the development of insulating materials with optimal mixing ratios of heterologous showed a higher partial resistance of discharge and a decrease in erosion, as the filler content ratio of micro silica was larger. In the future, various researches such as electrical, mechanical, and thermal studies will be needed to develop insulating materials that can commercialize power devices in environmentally friendly insulating gas.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.285-291
• /
• 1998

During recent years, the durability of concrete structures has been considered in concret practice and material research. To preserve the brittleness of concrete as well as energy absorption and impact resistance, amount of fiber usage has greatly increased in the field of public works. Ultra fine powder, silica fume, mixed into concrete, it reduce void of concrete structure. Especially, there's a great effect for strength improvement of concrete by initial pozzolanic reactions. For these reasons, if silica fume mixed into concrete, it decrease the total void by microfilter effect . Pozzolan reaction, between cement particle and silica powder, can elaborate the micro structure of matrix. And so, in this paper, we deal SFRC for the purpose of efficiently using of industrial by-products(silica fume). Also we performed the test for durability such as freeze-thaw resistance and accelerated carbonation of SFRC using silica fume.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.403-412
• /
• 2014

In this paper, enhancement of corrosion and chloride resistance of high performance self compacting concrete (SCC) through incorporating nanosilica into the binder has been investigated. For this purpose, different mixtures were designed with different amounts of silica fume and nano silica admixtures. Different binder contents were also investigated to observe the binder content effect on the concrete properties. Corrosion behavior was evaluated by chloride penetration and resitivity tests. Water absorption and capillary absorption were also measured as other durability-related properties. The results showed that water absorption, capillary absorption and Cl ion percentage decreased rather significantly in the mixtures containing admixtures especially blend of silica fume and nano silica. By addition of the admixtures, resistivity of the SCC mixtures increased which can lead to reduction of corrosion probability.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.341-344
• /
• 2004

In the present research, slump, modulus of rupture (MOR) and flexural toughness $(I_{30})$ of high performance hybrid fiber reinforced concrete (HPHFRC) mixed with micro-fiber (carbon fiber) and macro-fiber (steel fiber) and replaced with silica fume were assessed with the analysis of variance (ANOVA). Steel fiber was a considerable significant factor in aspect of the response values of MOR and boo Based on the significance of factors related to response values from ANOVA, following assessments were available; Slump decrease: carbon fiber >> steel fiber > silica fume; MOR: steel fiber > silica fume > carbon fiber; $I_{30}$: steel fiber > carbon fiber > silica fume. Steel fiber $1.0\%$, carbon fiber $0.25\%$ and silica fume $5.0\%$, and Steel fiber $1.0\%$, carbon fiber $0.25\%$ and silica fume $2.5\%$ were obtained as the most optimum mixture.

• 박물관보존과학
• /
• 제27권
• /
• pp.91-102
• /
• 2022

철기 문화재 복원에 사용되고 있는 실리카 계열의 무기질 충전제는 열팽창률감소, 흐름성 개선 등의 기능성 부여를 목적으로 사용되고 있다. 그러나 충전제의 양이 많을 수록 복원재의 물성저하 및 황변 현상 촉진의 원인이되며, 결과적으로 재처리로 이어져 유물의 피로도를 상승시키는 결과를 초래한다. 따라서 복원제와 충전제의 혼합 정량화 및 황변성 연구 필요성이 강조될 수 밖에 없다. 이를 보완하기 위해 실리카계 경량 충전제인 Micro Shell을 비교군으로 물성연구를 진행하였다. 실험 결과 기존에 사용하던 충전제에 비해 Micro Shell이 황변도 발생 수치가 최대 34% 낮았으며, 충전제의 배합양에 따라서 공통적으로 접착력과 비중의 물성 수치값이 좋은 것을 확인하였다. 본 연구 결과 Micro Shell의 사용 가능성에 대해 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3378-3382
• /
• 2012

A superhydrophobic surface with a water contact angle > $150^{\circ}$ has attracted great interest from both fundamental and practical aspects. In this study, we demonstrated that hydrophobicity of a silica nanotube (SNT) array can be easily controlled by the SNT aspect ratio. In addition, the adhesive and anti-adhesive properties were controlled without modifying the hydrophobic surface. Various silica structures on a polydimethylsiloxane substrate were prepared using the desired alumina template. Bundle-arrayed and bowl-arrayed silica surfaces exhibited extraordinary superhydrophobicity due to the large frontal surface area and hierarchical micro/nanostructure. As the strategy used in this study is biocompatible and a wide range of hydrophobicities are capable of being controlled by the SNT aspect ratio, a hydrophobic surface composed of an SNT array could be an attractive candidate for bioapplications, such as cell and protein chips.

• 소성∙가공
• /
• 제11권7호
• /
• pp.601-607
• /
• 2002

Optically transparent materials such as fused silica, quartz and crystal have become important in the filed of optics and optoelectronics. Laser ablation continues to grow as an important technique for micromachining and surface modification of various materials, because many problems caused by direct contact between tools and workpiece can be avoided. Especially, laser ablation with excimer lasers enables fine micromachining of transparent materials such as fused silica, quartz and crystal, etc. In this study, laser-induced wet etching of fused silica in organic solution was conducted. KrF excimer laser was used as a light source and acetone solution of pyrene was used as etchant. Changing the number of laser pulses, micro holes of various depths are fabricated.

• Advances in materials Research
• /
• 제12권3호
• /
• pp.227-242
• /
• 2023

Polyester composites play a vital role in civil engineering applications, especially in bridge and car park structures. Therefore, the addition of waste silica-based fillers will both improve the mechanical and durability performance of composites and produce an environmentally friendly material. In this study, the mechanical performance of polyester composites was investigated experimentally and numerically by adding micro and nano-sized silica-based fillers, marble powder, silica fume and nano-silica. 24 cubes for the compression test and 18 prisms for the flexural test were produced in six different groups containing 30% marble powder, 5% silica fume and 1% nano-silica by weight. SEM/EDS testing was used to investigate the distribution of filler particles in the matrix. Experimentally collected results were used to validate tests in the Abaqus software. Additionally, the Extended Finite Element Method (XFEM) was used to estimate the fracture process for the flexural test. The results show that the added silica fume, marble powder and nano silica improves the compressive strength of polyester composites by 32-38% and the flexural tensile strength by 10-60% compared to pure polyester composite. The numerically obtained results matched well with the experimental data, demonstrating the accuracy and feasibility of the calibrated finite element model.

• 콘크리트학회논문집
• /
• 제19권1호
• /
• pp.47-56
• /
• 2007

최근들어 고속도로, 고속철도, 지하철등의 건설이 증가하면서 터널의 건설도 늘어나고 있는 추세이다. 이러한 터널 공사에서 필수적으로 따르는 것이 숏크리트 공정이며 이러한 숏크리트의 시공은 앞으로도 더욱 증가할 추세에 있다. 그러나 숏크리트의 광범위한 시공에도 불구하고 여러 가지 문제점을 내포하고 있는 것이 사실이다. 따라서 본 연구에서는 우리나라 현행 숏크리트의 현황과 문제점을 분석하고, 고품질의 숏크리트 시공을 위하여 실리카퓸 숏크리트의 성능 및 적용성에 대해 분석하였다. 또한 숏크리트의 장기적인 안정성 확보를 위해서는 복합적인 환경조건을 고려한 열화 특성을 파악할 필요가 있다. 본 연구에서는 건습 반복, 동결융해 및 탄산화 등의 열화 인자를 복합적으로 적용한 열화 시험을 수행하였다. 특히, 우수한 강도 증진 효과로 국외에서 많이 사용되고 있는 실리카퓸을 적용하여 혼화재 치환에 따른 숏크리트의 장기 내구 특성을 평가하였다. 복합 열화 시험 결과 실리카퓸을 혼입한 숏크리트는 다른 배합에 비해 가장 양호한 결과를 나타냈고, 실리카퓸은 강도 증진 효과와 함께 강섬유 혼입에 의한 열화 현상을 최소한으로 감소시켜 숏크리트의 장기 내구성을 확보하는데 효과가 있었다.