Fine pitch microprobe arrays are microneedle-like probes for inspecting the pixel of LCD panel. They are usually made of multilayers of metallic, nonmetallic, or combination of the two. In this study, the microprobe arrays were fabricated using the process applied for MEMS fabrication technology and they consist of BeCu, BeNi, or Si. Their contacting probing force and deflection were measured using the laser equipment. The design requirement are 5gf of a minimum contact force and $150{\mu}m$ of a maximum deflection. A lot of microprobe shape are possible satisfying the requirement. A double cantilever-type microprobe having needles on both ends were applied for this study. Several candidate were chosen using the topology and shape optimization technique subjected to the design requirements. Finite element results and experimental results were compared and both gave good correlation.
In this experiment, a heterogeneous droplet consisted of de-ionized water and olive oil was made through two 31G injection needles. The injection flow rate was $50{\mu}{\ell}/min$ and the droplet size was 2 mm. The droplet was impinged onto a sapphire plate which was heated up to $300^{\circ}C$ by a heater. Two high speed cameras were used for visualization, and the frame rate was 20,000 fps. A 150W metal halite lamp was used for illumination. The dropping height was fixed to 20 mm and the corresponding Weber number was 10.6 based on water. Due to different boiling points of two liquids, partial boiling features of heterogeneous droplet was observed. At the Leidenfrost condition, micro explosion phenomenon has occurred.
적은 양의 시료를 분석할 수 있는 마이크로 컬럼 이온 크로마토그래피용 전도도 셀과 억압컬럼을 개발하였다. 안지름이 작은 모세관 컬럼을 사용하는 경우 이동상의 유속은 보통 $5{\sim}20{\mu}L/min$ 정도 된다. 따라서 이 경우 일반적인 전도도 셀은 사용할 수가 없기에 내부 부피가 작은 모세관 컬럼용 전도도 셀과 억압컬럼을 제작하였다. 전도도 셀은 두 개의 백금 피하주사 바늘을 안지름이 0.010 mm인 튜브 속에 넣어 간격이 $2{\mu}m$ 되게 만들었고, 억압컬럼은 Nafion 튜브를 이용하여 막-억압컬럼 형태로 개발하였다. 이 전도도 셀과 억압컬럼을 이용하여 실제 음이온들(플루오르화물, 아질산염, 질산염, 염소산염)을 분석한 결과 재현성 있고 양호한 크로마토그램을 얻었다.
The friction force of patterned needle in elastomer have been investigated to verify the application for bio and plastic industry. The micro pattern on the needle surface were prepared by 266 nm, 20 ns laser and 800 nm, 220 fs laser, which were able to generate the different surface roughness. The friction force was measured by the load cell of 10 N capacity. As the results, the friction force of no patterned needle is almost constant during the needle penetrates the silicone rubber sample. However, the needle having asperities shows the variation of the friction force. The higher the surface roughness is, the smaller the friction force is until the surface roughness is very high. In our experiment conditions, the reduction of the friction force by 20 % compared to no pattern needle was achieved with straight and $50{\mu}m$ discrete line generated by 266 nm, 20 ns laser.
Sung-Eun Cho;Hyung So Kim;Young-Nam Kwag;Dong-Hyeon Lee;Jae-Gu Han;Chang Sun Kim
Mycobiology
/
제50권4호
/
pp.213-218
/
2022
The genus Mitrula (Mitrulaceae, Helotiales), as also known as swamp beacons, inhabits submerged, decaying vegetation in standing or decaying needles, twigs, leaves, and shallow water. They play an important role in carbon cycling in some freshwater ecosystems. In the herbarium of the Korea National Arboretum (KH), seven Mitrula specimens were collected during mushroom forays in the period from 2019 to 2021. The Korean collections were found to be macromorphologically closely related to M. paludosa and M. elegans, but micro-morphologically they could be distinguished by characteristics of slightly narrower asci and aseptate ascospores. Our molecular phylogenetic analyses of the internal transcribed spacer (ITS) and 28S rDNA regions also revealed that our specimens were related to M. paludosa and M. elegans, but formed a distinct clade. Based on these results, we reported our specimens as new to science and discussed the phylogeny and diversity of Mitrula species.
Parylene-C which was mainly used for industries such as electronics, machinery and semiconductors has recently been in the spotlight in the medical field due to its properties such as corrosion resistance and biocompatibility. In this study we intend to derive a plan to improve the bonding strength of Parylene-C coating with the SUS304 base material for medical use which can be applied to various medical fields such as needles, micro needles and in vitro diagnostic device sensors. Through plasma pretreatment the bonding strength between Parylene-C and metal materials was improved. It was confirmed that the coated surface was hydrophobic by measuring the contact angle and the improvement of the surface roughness of the sample manufactured through CNC machining was confirmed by measuring the surface roughness with SEM. Through the above results, it is thought that it will be effective in increasing usability and reducing pain in patients by minimizing friction when inserting medical devices and in contact with skin. In addition it can be applied to various application fields such as human implantable stents and catheters, and is expected to improve the performance and lifespan of medical parts.
Objectives : Warm needling is the method combining the effects of acupuncture and moxibustion. In modern clinics, warm needling is only affected by treatment time or frequency. We need to study the physical characteristics of warm needles currently used in clinics in order to develop more efficient and economical treatments. Methods : We collected various warm needle specimens and analyzed chemical constitutions, measured heat transfer velocity, micro Vicker's hardness and specific resistance. We studied the relationship between heat transfer velocity and micro Vicker's hardness as well as that between heat transfer velocity and specific resistance. Results : The heat transfer velocity of the Silver_HL was 3.3 mm/sec, of the Au alloy group was 1.3~2.6 mm/sec, and Silver_IN, Silver_ZK and SS groups was less than 0.3 mm/sec. We therefore concluded that the needle composed of Ag has the best heat transfer velocity. In the Micro Vicker's hardness test, Vicker's hardness of the Au alloy group was 159~170 Hv, of Silver_HL was 181 Hv, and of the Silver_IN, Silver_ZK, SS group was 450.8~519 Hv. In the Silver_IN, Silver_ZK and SS groups, hardness was inversely proportial to thermal conductivity. In the specific resistance test, the specific resistance of Silver_HL was the lowest, that of the Au alloy group was the second lowest, and that of the Silver_IN, Silver_ZK, SS groups were the highest. Conclusions : We concluded that the needle composed of Ag has the best heat transfer velocity, highest electric conductivity and thermal conductivity, therefore the needle composed of Ag is suitable for warm needling.
본 연구에서는 광학 및 전자현미경 관찰과 전자현미분석을 수행하여 쥐 치아의 미세구조, 화학 조성 및 hydroxyapatite의 결정구조를 파악하였다. 치아의 겉 표면을 둘러싸고 있는 법랑질은 막대들이 일정하게 배열된 구조이며 결정도가 높고 Ca이 많이 침착되어 있다. 그에 비해 상아질은 상아세관이 통과하는 원형의 구멍이 고루 분포되어 있는 스펀지 구조이며 유기질의 존재로 인해 Mg의 분포가 법랑질에 비해 상대적으로 높게 나타났다. Hydroxyapatite 결정들은 법랑질에서는 크기가 큰 막대 형태로 나타났으나 상아질에서는 크기가 작은 침상 형태로 나타났으며, 각 조직의 결정도와 유기질의 유무에 따라 전자회절패턴의 차이를 보였다.
최근 몇 년 동안 탈모로 인해 우울증을 경험하는 인구가 증가하고 탈모 관련 치료법도 임상의학이나 외과적인 수술법과 같이 전문화되고 있다. 탈모 방지와 발모를 촉진하기 위한 시술법과 소재들이 있으나 그 효능, 효과가 뛰어나지 못하고 일부는 부작용을 동반하는 경우가 있다. 본 총설의 마이크로니들 시술법은 약물의 흡수를 촉진시켜주는 매우 작고 섬세한 니들을 이용한 시술법이다. 이 시술을 하는 동안 마이크로니들이 두피 내부로 약물의 흡수를 도와주는 마이크로 홀을 만들어 준다. 마이크로니들 시술 약물의 주요성분으로 대두 발효물질을 분석하였으며 대두 발효 소재는 탈모증에 항산화, 항안드로겐, 항혈전의 기능을 가진다. 대두 발효물의 흡수를 증가시켜주는 마이크로니들의 우수한 약물전달시스템으로 인하여 대두 발효물이 마이크로니들과 함께 사용될 때 복잡한 탈모기전에 더욱 효과적이다. 이 시술법은 탈모증을 방지하고 관리하며 개선시켜줄 수 있는 매우 유용한 두피케어법이며 일반적인 두피관리법 보다 더 빠른 효과를 나타낼 수 있어 차별화된다. 대두 발효물을 이용한 마이크로니들 시술법은 두피케어를 위한 진일보한 기술이다.
우리나라에서 자생하고 있는 소나무류 가운데 대표적인 적송(pinus densiflora)을 열수 및 아임계 추출하여 콜레스테롤식이에 의해 혈 중 지질함량이 증가한 상태에서 흰쥐의 지질 및 혈류, 혈소판 응집 억제를 통하여 적송잎이 혈행 및 혈청 중의 지질개선에 미치는 영향을 검토하였다. 본 실험에서는 콜레스테롤식이로 혈행 장애와 혈중의 높은 지질함량을 유도시키기 위해 흰쥐에게 3주간 0.5%콜레스테롤 식이를 투여하였고 적송의 효능을 검토하기 위해 적송잎의 열수 및 아임계추출물을 병합 투여하여 실험하였다. 그 결과 혈청 중 중성지방 및 총콜레스테롤 함량은 적송잎 추출물 투여(열수 및 아임계추출)에 의해 저하되었으며, 특히 중성지방 함량을 유의적으로 감소시키는 결과를 나타내었다. 한편 Hdl-콜레스테롤 농도는 콜레스테롤 식이 투여에 의해 감소하였으나, 적송잎 열수 및 아임계추출물 투여에 의해 증가되었다. Ldl-콜레스테롤과 동맥경화지수(AI)와 심혈관위험지수(CRF) 또한 적송잎 추출물 투여에 의해 저하되었다. 콜레스테롤 식이 투여로 인해 혈장 내 혈액응고인자(coagulation factors)의 지나친 활성화 및 혈소판 응집 촉진으로 혈류의 모세관 통과 시간이 늦어 졌으나, 적송잎 추출물의 투여로 인해 혈류의 속도가 빨라짐을 볼 수 있었고, 이는 적송잎이 혈액의 유동성에 좋은 영향을 줄 것으로 사료되어진다. 적송잎 추출물의 항혈소판 응집에 미치는 영향을 검토한 결과, 0.5%콜레스테롤 식이 투여(0.5%CHOL)군의 경우 대조군(CON)에 비해 혈소판이 응집되는 결과가 나타난 반면 적송잎 추출물을 투여한 군은 0.5%CHOL군에 비해 혈소판 응집이 억제되는 것으로 나타났다 이상의 결과로 미루어 적송잎이 혈행 개선과 혈청 중의 지질개선 효과를 나타내어 동맥경화증, 혈전증 등의 혈관 관련성 질환에 효과가 있을 것으로 기대되며, 기능성 식품 및 식재료로 사용하기 위한 앞으로의 더욱 구체적인 연구가 필요한 것으로 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.