• 멤브레인
• /
• 제18권1호
• /
• pp.53-64
• /
• 2008

벤토나이트 현탁액에 의한 폴리에틸렌 정밀여과 모세관 막의 오염특성에 대하여 검토하였다. 막오염의 윈인은 막표면 위에서 생성되는 케익층의 성장과 입자들이 세공을 막는 표준 및 완전세공막힘 때문이었으며, 막오염은 이들 세 가지 오염형태가 동시에 발생하지만 케익여과오염에 의해 크게 지배를 받는다. 운전압력 $1.0kg/cm^2$에서 총 막오염에 대한 성분오염의 비율은 표준세공막힘 3.36%, 완전세공막힘 3.18% 그리고 케익여과오염 93.46%이었다. 현탁액의 농도가 1000 ppm인 경우에는 완전세공막힘 1.71%, 표준세공막힘 1.90% 그리고 케익여과오염이 96.39%이었으며, 운전초기에 총 오염의 96.14%가 발생했다. 총 오염에 대한 케익여과의 영향은 세공이 $0.34{\mu}m$막에서 컸다. 순환흐름속도의 증가로 인해 성분오염은 약 10.20% 감소하였고, 총 오염에 대한 세공막힘의 비율은 높았다.

• Archives of Plastic Surgery
• /
• 제44권4호
• /
• pp.293-300
• /
• 2017

Background Simulation training is becoming an increasingly important component of skills acquisition in surgical specialties, including Plastic Surgery. Non-living simulation models have an established place in Plastic Surgical microsurgery training, and support the principles of replacement, reduction and refinement of animal use. A more sophisticated version of the basic chicken thigh microsurgery model has been developed to include dissection of a type 1-muscle flap and is described and validated here. Methods A step-by-step dissection guide on how to perform the chicken thigh adductor profundus free muscle flap is demonstrated. Forty trainees performed the novel simulation muscle flap on the last day of a 5-day microsurgery course. Pre- and post-course microvascular anastomosis assessment, along with micro dissection and end product (anastomosis lapse index) assessment, demonstrated skills acquisition. Results The average time to dissect the flap by novice trainees was $82{\pm}24$ minutes, by core trainees $90{\pm}24$ minutes, and by higher trainees $64{\pm}21$ minutes (P=0.013). There was a statistically significant difference in the time to complete the anastomosis between the three levels of training (P=0.001) and there was a significant decrease in the time taken to perform the anastomosis following course completion (P<0.001). Anastomosis lapse index scores improved for all cohorts with post-test average anastomosis lapse index score of $3{\pm}1.4$ (P<0.001). Conclusions The novel chicken thigh adductor profundus free muscle flap model demonstrates face and construct validity for the introduction of the principles of free tissue transfer. The low cost, constant, and reproducible anatomy makes this simulation model a recommended addition to any microsurgical training curriculum.

• 펄프종이기술
• /
• 제34권3호
• /
• pp.1-8
• /
• 2002

The object of this study was to determine the surface energy of hydrophobically modified micro-crystalline cellulose (MCC) with AKD and evaluate the effect of surface energy of the solid particles dispersed in aqueous medium on flotation efficiency. Especially to eliminate the complication derives from the diverse parameters of solid particles including particle size, type, etc. MCC's modified with AKD have been used. The surface energy Parameters were calculated from advancing contact angles of apolar and polar liquids on MCC pellets using the Lifshitz-van der Waals acid-base (LW:AB) approach. Total surface energy of hydrophobic MCC ranged from 46.19 mN/m to 48.60 mN/m. The contribution of the acid-base components to the total surface energy ranged form 13% to 17% for hydrophobic MCC's. The effect of surface characteristics on the flotation efficiency was evaluated. It was shown that there exist critical values of surface energies to increase flotation efficiency. Total surface energy and polar component of solid particles should be lower than 47 mN/m and 7 mN/m, respectively, for effective removal in the flotation process.

• 공업화학
• /
• 제20권2호
• /
• pp.177-185
• /
• 2009

자동차용 써모스타트 하우징 피팅부상의 침전물(스케일)에 대한 고장분석을 실시하였다. 에너지분산형분석기와 전자현미분석기를 이용하여 침전물이 부동액의 주요 첨가제 성분임을 확인하였다. 자세한 유기성분 분석을 위해 열분해 기체크로마토그래피/질량분석을 수행한 결과, 침전물의 주성분이 벤조산이며, 소량의 아세토페논, 벤젠 및 페닐계 화합물 등으로 이루어져 있음을 확인하였다. 더불어 침전물 생성 원인은 알루미늄 하우징과 고무호스 사이에 존재하는 틈새 공간에 부동액 성분의 침전에 따른 틈새부식에 기인한 것으로 판단된다. 이런 결과를 바탕으로 하여 써모스타트 하우징상의 침전물 생성과 틈새부식을 재현할 수 있는 가속시험기법을 개발하였다. 가속인자(온도, 습도)를 변화시키면서 실제 가동조건을 묘사하였다. 가속시험에서 얻은 침전물을 성분 분석을 통해 완벽히 재현되었음을 확인하였다.

• Food Science and Biotechnology
• /
• 제16권6호
• /
• pp.928-934
• /
• 2007

Physiochemical properties, such as yield and molecular weight distribution of polysaccharide fractions, of polysaccharides in the enzymatic hydrolysates of purslane were investigated and characterized. A higher amount of micro nutrients, such as potassium (9,413 mg/100 g), phosphorus acid (539 mg/100 g), leucine, alanine, lysine, valine, glycine, and isoleucine, was present in whole purslane. The yield of water soluble polysaccharides (WSP) was 0.29, 7.01, and 7.94% when extracted using room temperature water (RTW), hot-water (HW), and hot temperature/high pressure-water (HTPW), respectively, indicating that HW or HTPW extraction may be effective to obtain WSP from purslane. The average ratio of L-arabinose:D-galactose in the WSP was 37:49, 34:37, and 27:29, when extracted using RTW, HW, and HTPW, respectively. These results indicate that water was a suitable extraction solvent for preparation of the arabinogalactan component of whole purslane. A higher yield and total carbohydrate content was obtained by using Viscozyme L instead of Pectinex 5XL during extraction of the WSP, which indicates that enzymatic treatment of purslane may be an effective method to control the Mw of polysaccharides. Finally, it was confirmed that Viscozyme L is a suitable enzyme for the hydrolysis and separation of polysaccharides obtained from purslane.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권1호
• /
• pp.51-60
• /
• 2005

This paper reviews the studies on the pressure drop and the heat transfer in microchannels. Although a lot of studies about the single-phase flow have been done until now, conflicting results are occasionally reported about flow transition from laminar flow to turbulent flow, friction factor, and Nusselt number. Some studies reported the early flow transition due to relatively greater wall effect like surface roughness, but the other studies showed that the flow transition occurred at the Reynolds number of about 2300 and the early flow transition might be due to less accurate measurement of the channel geometry. Also, there have been arguments whether the conventional relation based upon continuum theory can be applied to the fluid flow and the heat transfer in microchannels without modification or not. The studies about the two-phase flow in microchannels have been mostly about investigating the flow pattern and the pressure drop in rectangular channels using two-component, two-phase flow like air/water mixture. Some studies proposed correlations to predict two-phase flow pressure drop in microchannels. They were mostly based on Lockhart-Martinelli model with modification on C-coefficient, which was dependent on channel geometry, Reynolds number, surface tension, and so on. Others investigated the characteristics of flow boiling heat transfer in microchannels with respect to test parameters such as mass flux, heat flux, system pressure, and so on. The existing studies have not been fully satisfactory in providing consistent results about the pressure drop and the heat transfer in microchannels. Therefore, more in-depth studies should be done for understanding the fundamentals of the transport phenomena in the microchannels and giving the basic guidelines to design the micro devices.

• 한국지구과학회지
• /
• 제22권4호
• /
• pp.292-300
• /
• 2001

1997년 12월 이후 남한 중부지역에서 방생한 지진 중 13개 지진에 대하여, 지역에 따라 5개 그룹으로 구분하여 P 파 극성을 이용하여 구한 복합단층면해와 P, S파 극성 및 진폭비(SV/P, SH/P, SV/SH)를 이용하여 구한 결과를 비교 해석하였다. 지진원에서의 단층운동은 NNE-SSW와 WNW-ESE 방향의 단층면을 나타내며 주향이동 혹은 역단층성 주향이동운동이 우세하게 나타났다. 단층운동에 작용한 주압축응력방향은 ENE-WSW 방향, 혹은 NE-SW 방향을 나타내며, 이는 남한지역에 발생하는 주요 지진에 대하여 구해진 주압축 응력장 방향과 거의 일치한다.

• Composites Research
• /
• 제33권4호
• /
• pp.185-190
• /
• 2020

티타늄은 우수한 생체 적합성으로 임플란트 재료로 많이 사용되고 있지만 높은 비용과 뼈 대비 높은 영률로 인한 문제점이 있다. 이를 대체할 재료로 마그네슘합금이 주목받고 있다. 마그네슘합금은 티타늄과 마찬가지로 생체 적합성이 우수하고 뼈와 비슷한 영률을 가지고 있다. 하지만 부식으로 인한 내식성 문제가 있어 이를 해결하기 위해 다양한 표면 처리법이 연구되고 있다. 본 연구는 EDTA를 포함한 전해 용액에서 AZ31 마그네슘 합금 표면에 전해플라즈마공정으로 세라믹 코팅 층을 성장시키고 형성된 코팅의 특성은 SEM, XRD를 통해 미세구조 및 형상을 분석하였고 코팅 층의 미세 경도 측정을 하였으며, 사람의 혈장과 비슷한 성분인 SBF용액 내에서 부식테스트를 통해 생체내에서의 부식 특성을 평가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.751-758
• /
• 2002

Boreholes that are drilled in soft or unconsolidated materials such as gravels and coals are prone to collapse. To maintain the hole, some kinds of casing pipes are needed. If thereby a plastic pipe e.g. PVC is used for the casing, Televiewer tool is still capable of detecting structural features such as fractures in the borehole wall behind the pipe, whereas other borehole-imaging logging devices such as BIPS (Borehole Image Processing System) and FMS(Formation Micro Scanner) won't provide any information about that. Televiewer's primary component is a piezoelectric transducer centered in the hole. It acts as both a transmitter and receiver, and sends an ultrasonic beam. That is reflected, in the same manner as the seismic wave propagation, from the both sides(inner and outer surfaces) of the casing pipe, transmits through the pipe and then reflected from the borehole wall. With an appropriate choice of time-windowing, it is possible to capture the returning signals from both the borehole wall and the outer side of casing pipe as well. A suite of laboratory tests were performed on various physical models composed of plastic pipes with different diameters. Although the amplitudes of returning signals were reduced to about half the usual value due to the transmission loss, the dynamic range of Televiewer tool was sufficient to observe the structural features behind the casing pipe. Besides, several representative case studies at various research areas in our country are presented. The results demonstrate the usefulness of the transmissivity of Televiewer acoustic km, which will assist in further structural interpretation.

• 한국환경보건학회지
• /
• 제26권2호
• /
• pp.34-40
• /
• 2000

The purpose of this study was to investigate the seasonal variation of PAHs and to estimate their source characteristics in Taegu area. To do this, four sampling sites were selected to represent an industrial, a traffic, a traffic & residential, and a residential area in Taegu. Total of 72 samples had been collected from January, 1999 to September, 1999 on glass micro fiber filters by high volume air sampler. The PAHs in the total suspended particulate were extracted by a soxhlet process with dichloromethane and analyzed by GC/MSD, GC/FID. A statistical analysis was performed for the PAHs data set using a principal component analysis to derive important factor inherent in the interactions among the variables. The specific conclusions of this research are: 1) There was a significant seasonal and local variation in the atmospheric concentration of PAHs. The seasonal variation is winter>spring>Fall>summer, and the local variation is industrial>traffic>graffic & residential>residential area. 2) To evaluate the correlation between a measured PAHs and other affecting factors such as air pollutant concentration and meterological data, statistical analysis was performed. PAHs and other affecting factors such as air pollutant concentration and meterological data, statistical analysis was performed. PAHs have negative correlation with temperature (r=-0.593, p<0.05), radiation(r=-0.535, p<0.05), and O3(r=-0.719, p<0.05), but have positive correlation with NO(r=0.615, p<0.05) 3)Finally, multivariate analysis was performed for the PAHs dat set to identify and to estimate the source contributions of PAHs. According to results of statistical analysis, it could be identifies as three factors such as vehicular/gasoline, vehicular/diesel, and combustion in Taegu area.