• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.187-193
• /
• 2010

This paper proposes a cooling system using thermoelectric elements for improving the output of building integrated photovoltaic (BIPV) modules. The temperature characteristics that improve the output of a BIPV system have rarely been studied up to now but some researchers have proposed a method using a ventilator. The efficiency of a ventilator depends mainly on the weather such as wind, irradiation etc. Because this cooling system is so sensitive to the velocity of the wind, it is unable to operate in the nominal operating cell temperature (NOCT) or the standard test condition (STC) which allow it to generate the maximum output. This paper proposes a cooling system using thermoelectric elements to solve such problems. The temperature control of thermoelectric elements can be controlled independently in an outdoor environment because it is performed by a micro-controller. In addition, it can be operated around the NOCT or the STC through an algorithm for temperature control. Therefore, the output of the system is increased and the efficiency is raised. This paper proves the validity of the proposed method by comparing the data obtained through experiments on the cooling systems of BIPV modules using a ventilator and thermoelectric elements.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.123-126
• /
• 2000

본 논문에서는 음성 신호 처리 IC를 제어하는 임베디드 시스템을 Micro-controller를 이용하여 설계하고 제어 프로그램을 구성/제작하여 기능을 분석한다. 선택한 음성처리용 IC 중에서 ISD2560은 내장된 EEPROM에, T6668은 외부에 D-RAM을 연결하여 음성 메시지를 저장하고 있다. PIC16F84는 음성데이터의 입출력과 저장과 재생, 초기화를 위한 회로의 동작과 순서 제어, 시작과 종료하는 메모리 번지의 생성과 같은 제어 프로그램을 수행한다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.721-722
• /
• 2008

The method for evaluating AF's quality and calculating of AF checking time is proposed in this paper. For the purpose, the fuzzy control method is used. To show the effectiveness, the technique is implemented and the performance is verified on a NEC's 16 bit-general purpose micro-controller. The result shows that although the number of AF checking times is reduced, the receiver can find the best frequency faster.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.493-496
• /
• 2003

This paper studied the method to improve the reliability with the simple structure and the decreased calculation of Micro-Controller(uC) in Power Line Modem. We have implementation the program which correct the 1-bit error of the $\mu$C within the control system and the DS/SS(Direct sequence/spread spectrum) by adding the simple circuit between a single chip powerline transceiver IC and a uC.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.559-565
• /
• 2010

In this paper, we present a transformation method of source code from a POSIX (Portable Operating System Interface) based source code into an OSEK/VDX (Offene Systeme und deren Schnittstellen fur die Elektronik in Kraftfahrzeugen/Vehicle Distributed eXecutive) source code. As the electronic parts of automobile systems increase, the use of embedded software in automobile systems is also growing. Accordingly, many electronic systems are designed in automobile system with OSEK/VDX. Otherwise, one of the major problems of embedded software would be portability to other OS's. To enhance the portability and interoperability of embedded software, we propose a source code transformation method from POSIX to OSEK/VDX based on API (Application Programming Interface) translation method. Considering the characteristics of the OSEK/VDX which uses OIL (OSEK/VDX Implementation Language) standard, transformation process is performed with source code transformation and OIL code generation. For the validity of the proposed method, the transformation experiment is given using Micro-C OS II and OSEK/VDX with XC167CI micro-controller.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.5
• /
• pp.86-98
• /
• 1993

The application of A.C. motor for servo system is rapidly increased according to the recent advance of power electronics and digital control techniques. The induction motor which has a simple structure and needs less maintenance has become to be used widely in the industrial field for the speed and position control recently. In this paper, the full-bridge resonant inverter is applied to the speed control of single phase inducting motor. The digital PID control algorithm is used and the control parameter is determined by the Zigler-Nichols transient response method. The speed control is carried out by the one chip micro-processor(intel EV 8097BH) and control program is developed by the assembly language. By the experimental result, it is confirmed that the speed of single phase induction motor driven by full bridge series inverter can be smoothly controlled by a digital PID controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.60-69
• /
• 2010

Lookup-Table (LUT) based fuzzy controller for obstacle avoidance enhances operations faster in multiple obstacles environment. An LUT based fuzzy controller with Positive/Negative (P/N) fuzzy rule base consisting of 18 rules was introduced in our paper$^1$ and this paper shows a 50-rule P/N fuzzy controller for enhancing performance in obstacle avoidance. As a rule, the more rules are necessary, the more buffers are required. This paper suggests LUT sharing method in order to reduce LUT buffer size without significant degradation of performance. The LUT sharing method makes buffer size independent of the whole fuzzy system's complexity. Simulation using MSRDS(MicroSoft Robotics Developer Studio) evaluates the proposed method, and in order to investigate its performance, experiments are carried out to Pioneer P3-DX in the LabVIEW environment. The simulation and experiments show little difference between the fully valued LUT-based method and the LUT sharing method in operation times. On the other hand, LUT sharing method reduced its buffer size by about 95% of full valued LUT-based design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.65-73
• /
• 2006

When a satellite separates from the launch vehicle, an initial high angular rate or a tip-off rate is generated. B-dot logic is generally used for controlling the initial tip-off rate. However, it has the disadvantage of taking a relatively long time to control the initial tip-off rate. To solve this problem, this paper suggests a new detumbling control method to be able to adapt to micro/nanosatellite with the pitch bias momentum system. Proposed detumbling method was able to control the angular rate within 20 minutes which is significantly reduced compared to conventional methods. Since the previous wheel start-up method cannot be used if the detumbling controller proposed by this paper is used, a method is also proposed for bringing up the momentum wheel speed to nominal rpm while maintaining stability in this paper. The performance of the method is compared and verified through simulation. The overall result shows much faster control time compared to the conventional methods, and achievement of the nominal wheel speed and 3-axes stabilization while maintaining stability.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.103-112
• /
• 2020

Field robots are used in various fields, such as agriculture, forestry, manufacturing, and construction; their use has recently expanded to include submarine areas. Field robots can aid in various tasks, such as soil transport, ground clearance, and dismantling of buildings. As field robots are used in a variety of different areas, the difficulty of the work is also quite varied. Increased difficulty is associated with an increased risk of accidents involving the field robot. In order to reduce the accident rate of field robot workers, the need for digitalization and automation of field robots is becoming more of an issue. To this end, it is necessary to study a system that enables workers to do their work without directly contacting a field robot. Therefore, in this paper, we introduce a control system for wireless remote control of a small field robot. The field robot can be wirelessly controlled by a worker in a remote location if the worker cannot be present at the work site. The implemented remote system is tested according to the type of work, and the operating characteristics of the remote system are assessed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.671-677
• /
• 2016

A Controller Area Network (CAN) is a serial communication protocol that is highly reliable and efficient in many aspects, such as wiring cost and space, system flexibility, and network maintenance. Therefore, it is chosen for the communication protocol between a single chip controller based on Field Programmable Gate Array (FPGA) and peripheral devices. In this paper, the design and implementation of CAN IP, which is written in VHSIC Hardware Description Language (VHDL), is presented. The implemented CAN IP is based on the CAN 2.0A specification. The CAN IP consists of three processes: clock generator, bit timing, and bit streaming. The clock generator process generates a time quantum clock. The bit timing process does synchronization, receives bits from the Rx port, and transmits bits to the Tx port. The bit streaming process generates a bit stream, which is made from a message received from a micro controller subsystem, receives a bit stream from the bit timing process, and handles errors depending on the state of the CAN node and CAN message fields. The implemented CAN IP is synthesized and downloaded into SmartFusion FPGA. Simulations using ModelSim and chip test results show that the implemented CAN IP conforms to the CAN 2.0A specification.