• 폴리머
• /
• 제27권4호
• /
• pp.330-339
• /
• 2003

폴리(스티렌-co-디비닐벤젠) 수지 페닐고리의 클로로메틸화를 통해 메틸렌티올기를 도입한 수지 (I), 폴리(스티렌-co-메틸 메타아크릴레이트-co-디비닐벤젠) 공중합체의 페닐고리와 에스터기에 클로로메틸화 반응을 거쳐 각각 메틸렌티올기를 도입하여 중금속 이온들과의 배위결합에 필요한공간개념을 배려한 수지(II) 및 폴리(스티렌-co-디비닐벤젠) 수지의 페닐고리를 클로로설폰화한 후, 소디움하이드로술파이드로 티오설폰산화한 수지 (III) 등 3가지 종류의 티올계 구상형 수지들을 합성하였다. 이어, 이들 킬레이트 수지들에 대한 중금속 이온의 흡착경향을 평가한 결과, 티올기 함유 I형 킬레이트 수지는 Hg$^{2＋}$에 대해서만 선택적 흡착성을 보였고, 티올기 함유 II형 킬레이트 수지는 Hg$^{2＋}$에 대한 흡착성능이 보다 향상되었으며, Cu$^{2＋}$, Pb$^{2＋}$, C$d^{2＋}$ 및 Cr$^{3+}$ 등의 몇몇 중금속 이온들에 대해서도 약간의 흡착능을 보였다. 다른 한편으로, 친수성의 티오설폰산기 함유 III형 킬레이트 수지는 효율적 흡착체로서 Hg$^{2＋}$, Cu$^{2＋}$, Ni$^{2＋}$, Co$^{2＋}$ 및 Cr$^{3+}$ 등의 중금속 이온들은 물론, 특히 C$d^{2＋}$ 및 Pb$^{2＋}$에 높은 흡착능을 보였다.

• 한국응용과학기술학회지
• /
• 제18권1호
• /
• pp.29-39
• /
• 2001

An acrylic resin was synthesized with several monomers, styrene(St), 2-hydroxyethyl methacrylate(2-HEMA), n-butyl acrylate, methyl methacrylate, and acetoacetoxyethl methacrylate(AAEM) to prepare a high-solid coatings. Then, a high-solid acryl/melamine coatings was prepared by curing the acrylic resin with a curing agent, hexamethoxymethylmelamine(HMMM). The curing behavior of the acrylic resin with HMMM was investigated by the Ozawa method using DSC. For AAEM/HMMM and 2-HEMA/HMMM curing reactions, activation energies were 33.01 and 27.12 kcal/mol and frequency factors were $9.54{\times}10^{15}}$ and 1.53{\times}10^{13} $min^{-1}$, respectively. From the results, it was found out that 2-HEMA showed higher reactivity with the curing agent than AAEM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1499-1500
• /
• 2011

In this paper, we investigated the electrical properties change of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-pentacene) depending on polymer blend. We fabricated organic thin film transistor (OTFT) using blending solution of small molecule and polymer. In this study poly(2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene) (MEH-PPV), poly (9-vinylcarbazole) (PVK), poly [N,N'-bis(4-butylphenyl)-N,N'-bis(phenyl)benzidine] (poly-TPD), poly(${\alpha}$-methyl styrene), Poly(methyl methacrylate) (PMMA) are used as a polymer. Fabricated OTFT with blending solution of TIPS-pentacene and PVK shows best performance in this experiment. OTFT fabricated by blending solution of TIPS-pentacene and PVK shows field effect mobility of 0.0189 $cm^2/V{\cdot}s$, on/off ratio of 1.9E-5 and threshold voltage of 7.4 V.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.485-494
• /
• 2008

The acrylic coating emulsions were prepared by the emulsion polymerization to protect the surface of steel plate from the corrosion chemicals like acid, base and salt water. MMA(methyl methacrylate), styrene, BA(butyl acrylate), and 2-HEMA(2-hydroxyethyl methacrylate) were used as monomer. KPS(potassium persulfate) and SBS(sodium bisulfite) as redox initiator and SDBS(sodium dodecylbenzene sulfonate) as emulsifier were used on the emulsion polymerization reaction. The most stable in-situ coating was obtained when 10% of MMA was added. Both particle size and quantity in emulsion were decreased as increasing the mount of SDBS. the most stable prepared coating emulsion with polyisocyanate crosslinker showed very high anticorrosion properties on the coated steel layer to salt water, whereas no significant improvement of anticorrosion property to acdic and basic condition it showed.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.100-106
• /
• 2022

Waterborne polyurethane-acrylate(WPUA) dispersions were prepared by surfactant-free emulsion polymerization in a two-step process. In the first step, polytetrahydrofuran, isophorone diisocyanate, dimethylol proponic acid, and 2-hydroxyethyl methacrylate were used to synthesize a vinyl-terminated polyurethane prepolymer. In the second step, styrene, methyl methacrylate, butyl acrylate, and different multi-functional crosslinkers were copolymerized. 1,6-hexanediol diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate were used as the crosslinkers, and their effect on the mechanical and thermal properties of WPUA was investigated. Overall, as the number of functional groups of the cross-linker increased, the gel fraction improved to 79.26%, the particle size increased from 75.9 nm to 148.7 nm, and the tensile strength was improved from 5.86 MPa to 12.40 MPa. In thermal properties, the glass transition temperature and decomposition temperature increased by 9.9℃ and 18℃, respectively. The chemical structures of the WPUA dispersions were characterized by Fourier-transform infrared spectroscopy. The synthesized WPUA has high potential for applications such as coatings, leather coatings, adhesives, and wood finishing.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.337-344
• /
• 2016

본 연구에서는 3차원(3-dimensional, 3D) 프린팅 기술로 출력된 팬톰에 대한 X선 투과성을 평가하고자 하였다. 3D 프린팅 방식은 용융적층조형(fused deposition modeling, FDM) 방식을 이용했으며 소재는 아크릴로나이트릴 뷰타다이엔 스타이렌(acrylonitrile butadiene styrene, ABS)을 사용하였다. 팬톰은 원통 모양으로 설계하였으며 전산화단층영상장비(computed tomography, CT)에서 획득한 단면영상으로 균일도를 측정하였다. X선 투과성 평가는 3D 출력된 팬톰 내부에 이온챔버를 삽입하여 실시하였다. 그 결과, 평균 균일도가 2.70 HU이었으며 기존 폴리메틸 메타크릴레이트(poly methyl methacrylate, PMMA) CT 팬톰과 3D 프린터로 출력된 팬톰에서 측정된 X선 투과성의 상관관계는 0.976로 높은 상관관계가 있는 것으로 나타났다. 향후 3D 프린팅 기술을 이용한 방사선정도관리 팬톰 제작에 기초자료로 활용할 수 있으리라 기대한다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.337-337
• /
• 2006

The synthesis of an octafunctional resorcinarene based initiator for nitroxide mediated polymerization and its ability to yield random star copolymers of styrene and methyl methacrylate is studied. The effect of the initiator conformations towards its activity and the conditions that permit the formation of well-defined star block copolymers is also investigated in detail. The characterization of the initiator and the polymers were carried out by various spectro-analytical techniques. Well-defined random copolymers were obtained with controlled molecular weight and low PDI depending on the monomer feed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1582-1584
• /
• 2008

This paper reports a simple fabrication method for creating the superhydrophobic polymer surface using a plasma etching. Generally, it is necessary for the superhydrophobic surfaces to have a rough structure on surface with the composition of the low surface energy. In this study, Poly(methyl methacrylate) (PMMA), poly(ethylene terephthalate) (PET), acrylonitrile butadiene styrene (ABS) with superhydrophobic surface were fabricated using $O_2$ plasma etching and vapor deposition with the fluoroalkylsilane self-assembled monolayers. The plasma treated polymer surfaces are covered with the nano-pillar shaped structures after treatment for $1{\sim}2min$. And these samples with FOTS SAMs coating are showed the superhydrophobicity having the water contact angle of around $150^{\circ}$ and sometimes around $180^{\circ}$ depending on the treatment time. Furthermore the nanostructured polymer is transparent for the visible light.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권7호
• /
• pp.279-286
• /
• 2002

Linear and nonlinear complex permittivities were measured for copolymers of vinylidene cyanide(VDCN) with vinyl acetate(VAc), vinyl propionate(VPr), vinyl bezoate(VBz), styrene(St) and methyl methacrylate(MMA). Experimental results are well fitted by the function (equation omitted) except at low frequency where dc conduction dominates. The analysis of dielectric relaxation mechanism by combined knowledge about linear and nonlinear dielectric permittivities and dipoles give us informations about electrical and thermal motions in these copolymers. According to the analysis it could be found that the variation for temperature of the dielectric relaxation strength in these copolymers is related to the interaction between dipoles and the nonlinear dielectric effect factor R$_{s}$ is proportional to square of the dipolar correlation factor R$_{p}$././.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.105-107
• /
• 1990

In this study, we prepared plasma polymerized thin films as changing the composition rate of the Ar/CO$_2$, 0 to 100%, for analysing the influence of CO$_2$ gas in plasma polymerization. Power source was the RF frequence (13.56MHz), the monomers were styrene and MMA (Methyl-methacrylate), and substrates were glass and KBr(or NaCl) for IR spectroscopy. The molecular structure of plasma polymerized organic thin films was examined by IR, FT-IR, Gas chromatography and so forth.