• Journal of Korean Neurosurgical Society
• /
• 제30권sup1호
• /
• pp.51-54
• /
• 2001

Objective : Authors analyzed clinical outcomes of cranioplasty according to the materials used for covering defects of the skulls. Methods : From January 1997 to February 2000, there were forty one patients undergone cranioplasty at our institution. We used refrigerated autogenous bone flaps in 19 cases(group A) and methyl methacrylate(MMA) in 22 cases(group B). The medical records and plain skull radiographs of the patient were reviewed. Results : There were thirty men and eleven women. Mean follow up period was 12 months(From operation to last Outpatient department follow up). The mean operative time of the group A($136.8{\pm}3$ minutes) was shorter than the group B($172.7{\pm}2$ minutes, Mann-Whitney test, p=0.001). In group A, the degree of satisfaction was good in 8 cases, fair in 10, and poor in 1. In the group B, there were fair in 13 and poor in 9. So the cosmetic result was superior in the group A(Chi-square test, p=0.00). The complications were occured in one case of flap infection in the group A and 6 in the group B(one stitch abscess, 4 infected flaps, one subgaleal hematoma). Conclusion : Cranioplasty using refrigerated autogenous bone flap showed shorter operative time, better cosmetic results, and less complication rate than those using MMA.

• 폴리머
• /
• 제34권4호
• /
• pp.341-345
• /
• 2010

현탁중합에 의한 폴리(메틸 메타크릴레이트)((poly(methyl methacrylate)(PMMA))/은 미세입자 제조시 사용된 은 나노입자가 중합속도 및 PMMA 미세입자의 형태에 미치는 영향을 고찰하였다. 은 나노입자의 친수성 정도 는 중합속도 및 PMMA/은 미세입자의 형태에 큰 영향을 주었다. 개질된 은 나노입자를 이용하여 중합한 경우에 중합 속도가 약간 증가하였다. 중합온도가 낮음에도 불구하고 85% 이상의 전환율을 가지는 PMMA/은 미세입자를 제조할 수 있었다. 사용된 은 나노입자 표면의 친수성 정도에 따라 중합 후 미세입자의 표면은 볼록한 모양과 오목한 모양의 입자가 제조되었다. 친수성 정도가 감소된 은 나노입자를 이용하여 현탁중합된 미세입자가 안정적인 나노복합체를 형성하였다.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.25-31
• /
• 2022

By an aid of needle coating, we have fabricated a spherical microlens array using poly(methyl methacrylate) for potential applications in light extraction of organic light-emitting diodes. With an attempt to achieve high-density and high-aspect-ratio microlens arrays, we have investigated the coating behaviors by varying the material parameters such as the solute concentration and wettability of the poly(methyl methacrylate) solution and process parameters such as the dwell time of needle near the substrate, retract distance of needle from the substrate, and coating gap between the needle and substrate. Under the optimized coating conditions, it is demonstrated that high-aspect-ratio microlens arrays can be obtained using a coating solution with high solute concentration and a small amount of a hydrophobic solvent. It is found that the diameter and height of microlens array are decreased with increasing poly(methyl methacrylate) concentration, yet the overall aspect ratio is rather enhanced. By the addition of 5 wt% hexylamine in 35 wt% poly(methyl methacrylate) solution, we have achieved a spherical microlens with the height of 7.7 ㎛ and the width of 94.24 ㎛ (the aspect ratio of 0.082). To estimate the capability of light extraction by the microlens array, we have performed ray tracing simulations and demonstrated that the light extraction efficiency of organic light-emitting diode is expected to be enhanced up to 24%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.109-110
• /
• 2023

Domestic ultra-hard road repair materials require a lot of time before the road can be opened to traffic. Therefore, in this study, Methyl Methacrylate (MMA) based road repair material was used to improve the above problems. Furthermore, the basic physical properties of MMA-based pavement repair materials are examined to confirm their suitability in concrete pavements. For this study, two types of MMA road repair materials (A type and B type) were selected. Then, the curing of the test specimens prepared for painting was carried out under three conditions. The experimental items were viscosity (drop time) and drying time (set to touch, dry-hard). As a result of the experiment, viscosity (drop time) was faster in type A than in type B. The drying time results were as follows. In the case of set ti touch, both type A and type B dried in about 10 minutes regardless of the curing conditions. In the case of dry-hard, regardless of the curing conditions, A type dried longer than B type, but it dried faster than conventional road repair materials. Therefore, within the scope of this study, it is considered that A type has a high potential for utilization as a road repair material.

• 폴리머
• /
• 제25권5호
• /
• pp.617-624
• /
• 2001

음이온계 유화제를 사용하여 monomer pre-emulsion을 제조한 다음 ammonium persulfate를 개시제로 하여 단계 중합법에 의해 새로운 입자의 생성이 적고 중합 과정에서 안정성이 우수한 poly(methyl methacrylate)(PMMA)/polystyrene (PSt) 라텍스를 제조하였다. 본 연구에서는 shell 중합시에 새로운 입자의 생성이 적고 중합 중 안정성이 우수한 라텍스를 제조하기 위해 개시제농도, 유화제농도, 중합온도가 PMMA/PSt와 PSt/PMMA의 core-shell 구조에 미치는 영향을 알아보았다. 중합한 라텍스를 입도분석기 (particle size analyzer: PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계 (differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 필름 조막성 (minimum film formation temperature: MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 또 다른 특성을 확인하였다.

• Carbon letters
• /
• 제13권3호
• /
• pp.178-181
• /
• 2012

In this work, we synthesized superhydrophobic coatings by chemical surface functionalization of multi-walled carbon nanotubes (MWCNTs). This was accomplished through the radical polymerization of 3-(trimethoxysilyl) propyl methacrylate modified MWCNTs and fluoro acrylate/methyl methacrylate. The chemical compositions and microstructures of the prepared MWCNT surface were investigated using X-ray photoelectron spectroscopy, Fourier transform infrared spectrometry, and scanning electron microscopy, respectively. The wettability of the MWCNTs surface was determined through contact angle assessments in different liquids. The resulting surface exhibited a water contact angle of $157.7^{\circ}$, which is clear evidence of its superhydrophobicity. The 3D MWCNT networks and the low surface energy of the -C-C- and -C-F- groups play important roles in creating the superhydrophobic surface of the MWCNTs.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.257-261
• /
• 2000

Monodisperse polymer particles have many industrial applications such as surface coatings for metal panels, chromatographic media, spacers for liquid crystal display panel, and fillers for cosmetics, etc.. Micron-size monodispersed poly(methyl methacrylate) particles were prepared by dispersion polymerization in methanol medium in the presence of poly(vinyl pyrrolidone) and 2,2'-azobis(isobutyronitrile) as steric stabilizer and initiator, respectively. Effects of polymerization parameters, such as monomer and initiator concentration, stabilizer type and concentration, solvent composition on average particle size and size distribution were studied.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.617-622
• /
• 2007

A simple and economic antistatic agent, (2-methacryloyloxyethyl)acid phosphate (acryl phosphate), was synthesized via the reaction of 2-hydroxyethyl methacrylate with phosphorus pentoxide. The acryl phosphate antistatic agent, synthesized in this study, was introduced into poly(methyl methacrylate) (PMMA) resin via copolymerization with MMA. This antistatic agent provides the PMMA matrix with excellent antistatic properties, including surface resistance and electric charge. A comparison of the present antistatic agent with other commercial agents demonstrated the excellence of not only its electrical, but also its thermal and mechanical properties.

• 공업화학
• /
• 제18권2호
• /
• pp.121-125
• /
• 2007

아크릴계 에멀젼의 내수성 및 촉감을 향상시키기 위해 유연하고 낮은 표면에너지를 가지는 실록산 단량체 및 올리고머와의 공중합체를 제조하였다. 아크릴 작용기를 갖는 실록산 단량체와 올리고머를 합성하고, n-butyl acrylate와 methyl methacrylate를 사용하여 실록산 함유 아크릴 삼원공중합체를 제조하고 표면자유에너지의 변화 및 점착특성을 조사하였다. 삼원공중합체의 Tg는 실록산 단량체의 주입 양이 증가함에 따라 감소하였으나, 올리고머의 경우는 양 말단의 아크릴기에 의해 가교반응이 일어남으로써 삼원 공중합체의 Tg는 증가하였다. 실리콘 단량체와 올리고머를 첨가함에 따라 tack 값과 표면에너지가 감소하는 것으로 내수성 및 촉감이 향상된 것을 확인하였다

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.332-340
• /
• 2003

Crosslinked poly(methyl methacrylate) particles from 2.4 to $8.1{\mu}m$ in diameter were prepared by homogenized suspension polymerization. The effect of polymerization parameters such as homogenizing speed, homogenizing time and stabilizer concentration on the particle size were examined. Optical diffusion films were prepared with the crosslinked poly(methyl methacrylate) particles. The effect of film thickness, particle size, and particle size distribution on transmittance and haze of optical diffusion film was examined. Transmittance of optical diffusion film increased with increasing particle size and decreasing film thickness. Haze increased with increasing film thickness and decreasing particle size. We also found the existence of an optimum ratio for optical performance when the mixture of small particle and large particle was used.