• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.85-90
• /
• 2010

This study was carried out to develop turning radius measuring method and device of using a DGPS speed sensor for agricultural tractors. The measurement system consisted of a DGPS speed sensor, a data acquisition device, a touch panel, a photo sensor, a radio modem and a notebook computer. Three methods were developed: average of turning speed-time method, integral of turning speed-time method, and speed-heading angular velocity method. Best method was average of turning speed-time method which could be used with a maximum error 2.7 cm.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.19-29
• /
• 2022

The 2D/1D method has become the mainstream of the direct transport calculation considering the balance of accuracy and efficiency. However, the 2D/1D method still suffers from stability issues. Recently, a quasi-3D method has been proposed with axial Legendre expansion. Analysis and comparison of the 2D/1D and quasi-3D method is conducted in theory from the equation derivation. Besides, the C5G7 benchmark, the KUCA benchmark and the macro BEAVRS benchmark are calculated to verify the theory comparisons of these two methods with the direct transport code SHARK. All results show that the quasi-3D method has better stability and accuracy than the 2D/1D method with worse efficiency and memory cost. It provides a new option for direct transport calculation with the quasi-3D method.

• 한국초등과학교육학회지:초등과학교육
• /
• 제18권2호
• /
• pp.131-144
• /
• 1999

This study investigates the pre-service teacher trainees' reactions to and evaluations about the earth science teaching method that utilizes songs. The subjects of the study were 81 university students in teacher training institutes for primary schools and secondary schools. The researcher used songs which the subjects judged to be reflecting some of the natural phenomena related to the earth science. The teacher trainees were taught some of the earth science concepts with the help of the selected songs. Discussions about the possibilities of the songs as an ai d to science teaching were also encouraged. The teacher trainees demonstrated positive reactions to the teaching method, and expressed their intention to use songs in their future teaching. The method also inspired the trainees to be inquisitive in their everyday life and seek other effective teaching methods.

• 대한지구과학교육학회지
• /
• 제3권3호
• /
• pp.239-247
• /
• 2010

The purpose of this study is to examine the effects of an free inquiry method based on PBL(Problem-Based Learning: PBL) to improve students science process skills and self-directed learning characteristics. To verify this research, twenty-two third-grade students were selected from Chung-ryeol Elementary School located in Busan. They have received pre-test and post-test about their abilities in their science process skills and abilities for self-directed learning characteristics. Also, their self-reflection data was analyzed. The teaching and learning PBL process is to provide the information named 'I am the expert on Earth and Moon' which is recreated by analyzing the science curriculum and characteristics of students from Lesson 3 'Earth and Moon', and to make plans for solving the information with K/NK method. Then, to solve the information is gathered and investigated using the PBL workbook. Lastly, students present their finding using the free inquiry method in a group. The post-test showed following results : first, the free inquiry method based on PBL stimulates inquisitiveness in students about science learning and the research group shows improved science process skill. It shows us that using the free inquiry method based on PBL can be used effects to elevate science process skill. Second, the free inquiry method based on PBL has a positive effect on self-directed learning. The research tells us that using the free inquiry method based on PBL can improve a student self-directed learning characteristics.

• Preventive Nutrition and Food Science
• /
• 제1권1호
• /
• pp.1-5
• /
• 1996

Rapid analytical method was investigated to determine precursors of N-nitrosamine such an nitrite and nitrate in squid(Illex illecebrosus and Sepiell maindroni), codfish(Gadus marcrocephalus)and flatfish(Paralichthys olivaceus) by ion chromatography(IC) and colorimetric methods. Recoveries of nitrite and nitrate in fish tissues were 89~98.7% and 94.1~99.8% for IC, and 98.4~103.7% and 67.7~102.2% for colori-metric method, respectively. Using IC, nitrite was not detected and nitrate was 0.89~1.23mg/kg, while using colorimetric method, nitrite and nitrate were NO~0.08mg/kg and 0.3~0.42mg/kg, respectively. Therefore, the IC method showed better recoveries, and was applicable to extract nitrite and nitrate simultaneously, and is simpler compared with colorimetric method in analyzing nitrite and nitrate from fish tissues.

• 한국약용작물학회지
• /
• 제16권6호
• /
• pp.446-454
• /
• 2008

An advanced extraction method by ultrasonic extraction with applied solid phase extraction (SPE) has been developed for the determination of simultaneous eight major ginsenosides, namely ginsenosides Rg1, Re, Rf, Rb1, Rg2, Rc, Rb2, and Rd in the root of Panax ginseng. Four extraction methods including n-BuOH reflux extraction (Method A), 70% EtOH reflux extraction (Method B), 50% MeOH reflux extraction with SPE (Method C), and 50% MeOH ultrasonication with SPE clean-up process (Method D) were investigated for the determination of eight major ginsenosides. Total contents of ginsenosides were highest by extraction of Method C as $2.408{\pm}0.011%$. However, Method D was evaluated as relatively simpler and more efficient method due to short extraction time, small solvent consumption and less expensive, compared to conservative reflux method. Ginsenosides were also satisfactorily separated with good resolution and the accuracy range was between 1.05 and 4.06% as relative standard deviation (RSD) by Method D. SPE condition and HPLC condition were further optimized for determination of eight major ginsenosides by the ultrasonic extraction method. Conclusively, ultrasonic extraction of 2 g sample of ginseng using ultrasonic bath and 1 loading for SPE was evaluated as proper condition for extraction of ginseng.

• 한국식품과학회지
• /
• 제53권6호
• /
• pp.682-687
• /
• 2021

The purpose of this study was to validate a high-performance liquid chromatography (HPLC) method for the quantitative analysis of quercetin in various foods. The method was based on HPLC-UV (360 nm). The method was validated using candy, beverage, and sausage which were tested for specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy, and the measurement uncertainty was assessed. Matrix-matched calibration was also applied. The calibration curves (0.5-50 mg/L) showed good linearity (r²≥0.9998). LOD and LOQ ranged from 0.15 to 0.31 mg/kg and from 0.44 to 0.93 mg/kg, respectively. The average accuracy and precision at 0.5, 2.5, and 10 mg/kg ranged from 84.3 to 102.0% and 0.7 to 3.0 relative standard deviation (RSD%), respectively. This study confirmed the applicability of the proposed method by applying it to commercial products, such as teas and beverages. Thus, the proposed analytical method is suitable for quantifying quercetin in various foods.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (2)
• /
• pp.697-699
• /
• 2004

Stochastic Neighbor Embedding(SNE) is a probabilistic method of mapping high-dimensional data space into a low-dimensional representation with preserving neighbor identities. Even though SNE shows several useful properties, the gradient-based naive SNE algorithm has a critical limitation that it is very slow to converge. To overcome this limitation, faster optimization methods should be considered by using trust region method we call this method fast TR SNE. Moreover, this paper presents a couple of useful optimization methods(i.e. conjugate gradient method and Newton's method) to embody fast SNE algorithm. We compared above three methods and conclude that TR-SNE is the best algorithm among them considering speed and stability. Finally, we show several visualizing experiments of TR-SNE to confirm its stability by experiments.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.170-176
• /
• 2016

Purpose: This study aimed to improve the method for determining the position of the center of gravity for agricultural tractors. Methods: The proposed method uses trigonometric functions and coordinate transformation. Data were measured according to the ISO 789-6 test procedures for the center of gravity of agricultural tractors. The height calculated using the proposed method was compared with that determined from an AutoCAD drawing. To find the center of gravity of the tractor, the algorithm for finding the intersection of the two lines was used. Results: The vertical height from the ground to the center of gravity is 682.06 mm. The vertical coordinates obtained from the calculation and the drawing were the same. Conclusions: The developed method uses trigonometric and polar coordinate transformation. The method was compared and verified with the AutoCAD drawing results. The results indicate that users can apply this developed method instead of the plotting method which is an inconvenient and time-consuming. Further, users can program Microsoft Excel to easily determine the vertical coordinate. In addition, researchers will propose this method to the ISO as a standard method for determining the center of gravity in accordance with ISO 789-6.

• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.226-232
• /
• 2016

Rainfall is one of crucial factors that impact on our environment. Rainfall data is important in water resources management, flood forecasting, and designing hydraulic structures. However, it is not available in some rural watersheds without rain gauges. Thus, effective ways of interpolating the available records are needed. Despite many widely used spatial interpolation methods, few studies have investigated rainfall center characteristics. Based on the theory that the spatial distribution of convective rainfall event has a definite center with maximum rainfall, we present a mathematical interpolation method to estimate convective rainfall distribution and indicate the rainfall center location and the center rainfall volume. We apply the method to estimate three convective rainfall events in Santa Catalina Island where reliable hydrological data is available. A cross-validation technique is used to evaluate the method. The result shows that the method will suffer from high relative error in two situations: 1) when estimating the minimum rainfall and 2) when estimating an external site. For all other situations, the method's performance is reasonable and acceptable. Since the method is based on a continuous function, it can provide distributed rainfall data for distributed hydrological model sand indicate statistical characteristics of given areas via mathematical calculation.