• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1009-1011
• /
• 2004

In the present work a very simple, sensitive and selective spectrophotometric method for the determination of nitrite in micellar media is described. The method is based on the color reaction of nitrite with p-nitroaniline in the presence of diphenylamine in acid media. In order to remove the extraction step, Triton X-100, a non-ionic surfactant was used as micellar media. The optimum reaction conditions such as acid concentration, reagents concentration and effect of time have been studied and the analytical characteristics of the method such as limit of detection, linear range and molar absorptivity have been obtained. The interference of some anions and cations was also tested. The method was applied to the determination of nitrite in real samples.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.1
• /
• pp.83-85
• /
• 1999

This study was conducted to find out analytical method for diesel fuel using uv-spectrophotometer in water samples. The optimum wavelength, detection limit and recoveries for desel fuel extracted with n-pentane were 257nm, $100{\sim}800mg/l$ and $102{\sim}121%$, respectively. This method were stable for measuring concentrations of desel fuel for 1 hour at $20{\pm}1^{\circ}C$ condition.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.693-698
• /
• 2002

A method has been described for the determination of Cu(Ⅱ), Pb(Ⅱ), Ni(Ⅱ), Cd(Ⅱ), Mn(Ⅱ) and Fe(Ⅲ) by flame atomic absorption spectrometry (FAAS) after preconcentration on Amberlite XAD-16 resin, using hexamethyleneammonium-hexamethylenedithiocarbamate (HMA-HMDTC) as a chelating agent, and NH3/NH4Cl buffer solution (pH 9). Influences of various analytical parameters such as pH, concentration of nitric acid, amount of analytes, diverse ions and sample volume were investigated. The relative standard deviation (RSD) and the detection limit (LOD) were found in the range of 0.8-2.9% and 0.006-0.277 ㎍/mL,respectively. Recoveries obtained by the column method were quantitative ( >95%) at optimum conditions.The method was applied to the determination of some metal ions in seawater and wastewater samples. A high preconcentration factor (about 150 for seawater and 75 for wastewater samples) and simplicity are the main advantages of this suggested method.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1199-1202
• /
• 2006

A simple, sensitive and rapid spectrofluorimetric method was developed for determination of mefenamic acid in pharmaceutical preparation and human urine. The procedure is based on the oxidation of mefenamic acid with cerium (IV) to produce cerium (III), and its fluorescence was monitored at 354 nm after excitation at 255 nm. The variables affecting oxidation of drug were studied and optimized. Under the experimental conditions used, the calibration graphs were linear over the range 0.03-1.5 mg $L^{-1}$. The limit of detection was 0.009 mg $L^{-1}$ and the relative standard deviation for 5 replicate determinations of mefenamic acid at 1.0 mg $L^{-1}$ concentration level was 1.72%. Good recoveries in the range of 102-107 and 102-109% were obtained for pharmaceutical preparation and human urine, respectively. The proposed method was applied to the determination of MF in one pharmaceutical preparation and human urine. The amounts of mefenamic acid found are very similar to those obtained by a standard method.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.227-230
• /
• 2004

Two extraction techniques, Ultrasonic and Microwave extraction method, were tested for the determination of arsenic in contaminated soil SRM (Montana Soil). The extraction mixture was prepared by mixing 1 M ortho-phosphoric acid and 0.1 M ascorbic acid. This extractant was known to preserve arsenic species. The appropriate extraction time was 10 min to 20 min and the recovery rate was about 80%. A coupled system, SPE-HG-ICP-AES, was used for the determination of inorganic arsenic species. The detection limit was around 2 $\mu\textrm{g}$/1 and the linearity of calibration curve was better than $R^2$=0.99.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.109-112
• /
• 2003

A method to determine As(V) ions in aqueous solution by chemiluminescence method has been studied using a stopped flow system. The method is based on the increased chemiluminescence intensity with the addition of As(V) ion to a solution of lucigenin and hydrogen peroxide. The effects of KOH concentration, $H_2O_2$ concentration and flow rate of reagents on the chemiluminescence intensity have been investigated. The calibration curve for As(V) was linear over the range from $1.0{\times}l0^{-6}$M to $1.0{\times}l0^{-4}$M, the coefficient of correlation was 0.997 and the detection limit was $3.3{\times}l0^{-7}$M under the optimal experimental conditions.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.787-792
• /
• 1995

A method for determination of ammonia-N in environmental water by air-segmented flow injection analysis using the colour reaction of phenol and sodium hypochlorite with ammonia was described in this paper. When the reaction temperature is $70^{\circ}C$ and the reaction residence time is 5 minutes, a sample frequency of $60-90h^{-1}$ can be achieved. The detection limit and relative deviation are $0.05mg.ml^{-1}$ and 4%, respectively. The recovery of this method is 96 - 110%, and the determination results of the method are greatly agreement with standard colorimetric method.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.363-367
• /
• 2004

A simple and convenient digestion method was developed for the determination of heavy metal in polyurethane sample using only nitric acid in open system without heating. This digestion method had prevented loss of volatile elements of Hg and As and reduced the pretreatment time for the sample digestion. The detection limit is lowered over 10 times than that of microwave digestion method. Recoveries in polyurethane material were 108% for As, 96 ~ 99% for Hg, 102 ~ 103% for Cr, 98 ~ 102% for Pb, 86 ~ 90% for Cd, and 90 ~ 93% for Cu.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.777-786
• /
• 2008

Human face avatar is important information in nowadays, such as describing real people in virtual world. In this paper, we have presented a face avatar creation and warping algorithm by using face feature analysis method, in order to detect face feature, we utilized local mean method based on facial feature appearance and face geometric information. Then detect facial candidates by using it's character in $YC_bC_r$ color space. Meanwhile, we also defined the rules which are based on face geometric information to limit searching range. For analyzing face feature, we used face feature points to describe their feature, and analyzed geometry relationship of these feature points to create the face avatar. Then we have carried out simulation on PC and embed mobile device such as PDA and mobile phone to evaluate efficiency of the proposed algorithm. From the simulation results, we can confirm that our proposed algorithm will have an outstanding performance and it's execution speed can also be acceptable.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.5
• /
• pp.662-667
• /
• 2023

Allantoin is an abundant component of yams and has been known as a skin protectant due to its pharmacological activities. In previous methods for allantoin determination using high-performance liquid chromatography (HPLC), the separation was unsatisfactory. We herein developed a ¹H quantitative nuclear magnetic resonance (qNMR) method for quantification of allantoin in the flesh and peel of yams. The method was carried out based on the relative ratio of signals integration of allantoin to a certain amount of the internal standard dimethyl sulfone (DMSO₂) and validated in terms of specificity, linearity (range 62.5-2000 ㎍/ml), sensitivity (limit of detection (LOD) and quantification (LOQ) 4.63 and 14.03 ㎍/ml, respectively), precision (RSD% 0.02-0.26), and recovery (86.35-92.11%). The method was then applied for the evaluation of allantoin in flesh and peel extracts of four different yams cultivated in Korea.