• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.238-240
• /
• 2005

The enthalpies of transfer, ${\Delta}H_t{\Theta}$, of NaI from water to aqueous methanol, ethanol and isopropanol, iPrOH, systems are reported. These data have been analysed in terms of the new solvation theory. These data are considered in terms of the new developed solvation theory including variable ($\alpha$n + $\beta$N), the net effect of the solute on the solvent-solvent bonding, is positive if there is a net breaking or weakening of solvent-solvent bonds. The solvation parameters recovered from the analyses indicate that the net affect of NaI on solvent structure is a breaking of solvent-solvent bonds and that NaI is preferentially solvated by water in all aqueous alcohol systems considered. ($\alpha$n + $\beta$N) values increase with increasing in the size of the alcohol alkyl residue from methanol to iPrOH.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.300-303
• /
• 1999

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. So-called, it was the solvent washing dry, Three organic solvents (methanol, ethanol, and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol, and acetone were all available organic solvents for this method. The tapes washed in methanol, ethanol, and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated. The tape casting system was designed for the solvent washing dry and prepared. An homogeneous tape was established by continuous tape casting process.

• 대한환경공학회지
• /
• 제29권8호
• /
• pp.915-921
• /
• 2007

본 연구는 매립가스내 siloxanes 측정의 기초 연구로서 국내 매립지를 대상으로 하여 용매흡수법으로서의 최적 용매를 선정하고자 수행하였으며, n-hexane, acetone 및 methanol을 흡수용매로 하여 각 용매의 siloxanes 검출 특성을 비교 분석하였다. 연구결과 표준물질의 GC분석에서 사용된 3가지 흡수용매 중 methanol이 용매와 silane 피크의 겹침현상이 발생하지 않아 분리능이 가장 우수하게 나타났다. 검출되는 siloxanes 농도는 흡수용매에 따라 최대 2.6배의 농도차를 보였으며, 포집유속과 포집 임핀저 단수에 대한 의존성에 대해서도 높은 것으로 나타났다. Methanol은 siloxanes 총 농도가 가장 높을 뿐만 아니라 휘발성이 적어 임핀저 단별 흡수에서도 가장 이상적인 형태를 보여주었으며, 가장 낮은 상대표준편차를 나타내 실험대상 매립지에 가장 적합한 것으로 나타났다. 그러나 용매의 적합성은 매립지의 쓰레기 성상, 매립이력에 따라 다를 수 있다고 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.573-576
• /
• 1999

The rate constants and kinetic solvent isotope effects (KSIE, KMeOH/kMeOD) for solvolyses of para-substituted phenylchloroformates in CH3OH, CH3OD, H2O, D2O, 50% D2O-CH3OD were determined at 15.0 and 25.0℃ using conductometric method. Kinetic solvent isotope effects for the solvolyses of para-substituted phenyl chloroformates were 2.39-2.51, 2.21-2.28, and 1.67-1.69 for methanol, 50% aqueous methanol, and water, respectively. The slopes of Hammett plot for solvolysis of para-substituted phenyl chloroformates in methanol, 50% aqueous methanol, and water were 1.49, 1.17 and 0.89, respectively. The Hammett type plot of KSIE, log (KSIE) versus p, can be a useful mechanistic tool for solvolytic reactions. The slopes of such straight lines for para-substituted phenyl chloroformates are almost zero in methanol, 50% aqueous methanol, and water. It was shown that the reaction proceeds via an associative SN2 and/or general base catalysis addition-elimination (SAN) mechanism based on activation parameters, Hammett p values, and slopes of Hammett type plot of KS-IE.

• The Korean Journal of Ceramics
• /
• 제7권2호
• /
• pp.55-57
• /
• 2001

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. Socalled, it was the solvent washing dry. Three organic solvents (methanol, ethanol and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol and acetone were available organic solvents for this method. The tapes washed in methanol, ethanol and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not found any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.3-18
• /
• 1997

This study was conducted to evaluate desorption efficiencies by types of desorption solvent for polar and non-polar organic compounds collected on activated charcoal tubes. Analytes tested were toluene, m-xylene, isobutyl alcohol, n-butyl alcohol, cellosolve acetate, and butyl cellosolve. Three different concentration levels of spiked sample were made. Types of cosolvent mixed with the main solvent, $CS_2$, were methanol, pentanol, and dimethylformamide (DMF) and the cosolvent for methylenechloride was methanol. The amounts of cosolvent added to the main solvent were 1, 5, and 10% by volume (v/v%), respectively. The results were as follows: 1. For all mixed solvents except 1% methanol and 1% pentanol with $CS_2$, desorption efficiency significantly increased, compared with that of $CS_2$ alone. 2. Desorption efficiency increased by increasing analyte loading on charcoal tube regardless of mixed solvents used and the material polarity. 3. For all cosolvents mixed with $CS_2$ by 1% and 5% volume, desorption efficiency for non-polar compound was significantly higher than that of polar compound. For the 10% mixed solvents and the methylenechloride mixed with methanol, the results were opposite. 4. The lowest mean percent bias of 4.79% was obtained from the 5% DMF-$CS_2$ mixed solvent, followed by 4.82% from the 10% DMF-$CS_2$ solvent while the highest bias of 23.26% was from the solvent of $CS_2$ alone. Based on the results of this study, in order to increase desorption efficiency, it is recommended to add such cosolvents as methanol, pentanol, and DMF to $CS_2$, preferably 5% by volume for analyzing polar compounds collected in charcoal tubes.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1346-1350
• /
• 2004

Pseudo-first order rate constants $(k_{obs})$ are reported for the following solvolyses in approximately isodielectric mixtures: 3- and 4-methoxybenzyl chloride, bromo- and chlorodiphenylmethane, and 4-chloro-, 4,4'-dichloro and 4-methyl-chlorodiphenylmethane in 0-80% v/v nitromethane-methanol mixtures; and bromo- and chlorodiphenylmethane and 4-methyl-chlorodiphenylmethane in various acetonitrile-methanol mixtures (in the range 0-50% v/v) at$25^{\circ}C.$ These data, and literature data for t-butyl halides (Cl, Br, and I), and for p-methoxybenzoyl chloride, show rate maxima in solvent compositions of ca. 30% aprotic cosolvent, explained by a stoichiometric solvent effect on electrophilic solvation. Linear relationships are observed between $(k_{obs})/[MeOH]^2$ and [AP]/[MeOH], where [AP] refers to the molar concentration of aprotic cosolvent. The results are consistent with competing third order contributions to $k_{obs}$, $k_{MM}[MeOH]^2$ with hydrogen-bonded methanol as electrophile, and $k_{MAP}[MeOH][AP]$ with hydrogen-bonding disrupted by the aprotic solvent.

• 한국자기공명학회논문지
• /
• 제25권4호
• /
• pp.64-69
• /
• 2021

In the developed NMR hyperpolarization techniques, Signal amplification by reversible exchange (SABRE) technique is thought to be a promising method to overcome the low sensitivity of bio-NMR/MRI. Most experiments using SABRE have been done in methanol, which is biologically harmful solvent. Therefore, more biological friendly solvent, such as ethanol can be more appropriate solvent to be applicable in bio-NMR and MRI. As the proof of concept, successful hyperpolarization on pyridine via SABRE is carried out in ethanol and its enhancement factor is calculated to be more than 150 folds. To investigate more about its possibility of hyperpolarization in different alcohol solvents, methanol and propanol are used for SABRE in the same condition. The overall polarization trend in different external magnetic field is similar but its polarization number is decreased with higher molecular weight solvents (the order from methanol to propanol). This result indicates that the efficiency of SABRE is different from solvent system despite its same functional group and similar properties. Higher para-hydrogen concentration, higher partial pressure of para-hydrogen, and deuterated solvent can increase the hyperpolarization in any solvents. With these series of successful SABRE results, future studies on SABRE in more biofriendly environment, on more various solvent systems, and with more substrates are needed and it will be the firm basis for applying the SABRE system on the future bio-NMR/MRI.

• 한국식품과학회지
• /
• 제36권3호
• /
• pp.518-521
• /
• 2004

이상계 용매시스템을 이용하여 물질을 고순도로 대량 분리 할 수 있는 기술인 countercurrent chromatography를 이용하여 인삼으로부터 생리황성 성분인 saponin을 대량 분리 농축하였다. 용매 조성별 인삼 saponin의 분배계수에 따른 인삼 saponin 분리에 적합한 용매시스템은 chloroform/methanol/water(40/39/21, v/v/v)으로 결정되었으며 HSCCC의 작동 조건은 chloroform/methanol/water 용매시스템의 하층부를 이동상으로 한 head to tail mode에서 이동상의 유속 5mL/min, 인삼추출물 injection량 $200{\mu}L$, 컬럼회전속도 800 rpm의 조건이 적합한 것으로 판단되었다. 이러한 조건하에서 분리된 인삼saponin의 양은 $550.7{\mu}g$으로 HSCCC에 주입한 인삼 추출물 $200{\mu}L$중에 존재하는 총 saponin의 양 $865.5{\mu}g$에 비교하여 전체 수율은 63.6%로 나타났으며 TLC로 각 분획의 순도를 확인할 수 있었다.

• Asian Journal of Atmospheric Environment
• /
• 제11권1호
• /
• pp.1-14
• /
• 2017

For the quantitative analysis of volatile organic compounds (VOC), the use of a proper solvent is crucial to reduce the chance of biased results or effect of interference either in direct analysis by a gas chromatograph (GC) or with thermal desorption analysis due to matrix effects, e.g., the existence of a broad solvent peak tailing that overlaps early eluters. In this work, the relative performance of different solvents has been evaluated using standards containing 19 VOCs in three different solvents (methanol, pentane, and hexane). Comparison of the response factor of the detected VOCs confirms their means for methanol and hexane higher than that of pentane by 84% and 27%, respectively. In light of the solvent vapor pressure at the initial GC column temperature ($35^{\circ}C$), the enhanced sensitivity in methanol suggests the potential role of solvent vapor expansion in the hot injector (split ON) which leads to solvent trapping on the column. In contrast, if the recurrent relationships between homologues were evaluated using an effective carbon number (ECN) additivity approach, the comparability assessed in terms of percent difference improved on the order of methanol (26.5%), hexane (6.73%), and pentane (5.24%). As such, the relative performance of GC can be affected considerably in the direct injection-based analysis of VOC due to the selection of solvent.