• KIISE Transactions on Computing Practices
• /
• v.21 no.3
• /
• pp.223-238
• /
• 2015

Ramp metering is the most effective and direct method to control a vehicle entering the freeway. This paper proposed the new density-based ramp metering method. Existing methods that use the flow data had low reliability data and can have various problems. Also, when the ramp metering was operated by freeway congestion, the additional congestion and over-capacity can occur in the ramp. To solve this problem with the existing method, the proposed method used the density and acceleration data of the freeway and considered the ramp status. The developed strategy was tested on Trunk Highway 62 west bound (TH-62 WB) in Minnesota Twin-City and compared with Stratified Zone Metering(SZM), which had been operating in the Twin-City freeway. To constitute the experiment environment, the VISSIM simulator was used. The Traffic Information and Condition Analysis System (TICAS) was developed to control the PTV VISSIM simulator. The experiment condition was set between 2:00 PM and 7:00 PM, Oct 5th, 2014 during severe traffic congestion. The simulation results showed that total travel time was reduced by 20% for SZM. Thus, we solved the problem of ramp congestion and over-capacity.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.259-264
• /
• 2014

This research was conducted to find design factors of seed metering device for developing seeder. It can be sowed precisely 1~3 seeds of Foxtail millet & Sorghum. To obtain fundamental information for designing seed metering device, we conducted adaptability test of the existing seeder in Foxtail millet & Sorghum. Major findings were as followings. Except of Model-A which was adapted sorghum(by seeding metering cup of width 3.9mm and length 4.5mm), seeders which were used in experiment showed that high value of miss-planted rates and more than four-planted rates. So to enhance precision of seeding in Foxtail millet & Sorghum, existing seeders were considered necessary by some supplementation.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.363-369
• /
• 2002

Orifice meter is the most widely used flowmeter in custody transfer between KOGAS and city gas companies. Absolute pressure value is needed to calculate the gas flow of orifice metering system, but the gauge pressure transmitters are mainly used in the field. In case that the gauge pressure transmitters are used, the fixed value as standard atmospheric pressure(101.325kPa) is applied for the absolute pressure value. The real, local atmospheric pressures of each metering station are different from the standard condition as the altitude and weather conditions. In this study the flow calculation errors were quantitatively analyzed through examining the atmospheric pressures of 50 stations of KOGAS. The data for analysis are such like the time data of supplied gas amount, the altitude of each metering station, the time data of atmospheric pressures and altitudes of each weather observatory. The results showed that the local atmospheric pressures were different from the standard value and the gas flow calculation errors were distributed between $-0.024\%{\~}0.025\%$ based on the supplied gas amount in the year 1999 and 2000.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.106-111
• /
• 2010

Electronic watt hour meters(WHM) for high pressure running in domestic were installed to the digital type meter and ones for low pressure are expected to complete within several years. Domestic power metering technology is being beyond a simple framework with an electronic type and is rapidly evolving to intelligent smart metering systems in conjunction with promotion of a national smart grid project. Major policy outlook of the world's major power company regarding Intelligent metering is the application of the fare structure diversification and is the improvement of level of service to customers. In addition, electric power companies should focus on the cost reduction and the improvement of management efficiency through an efficient operation of distribution facility. In this paper, we are about to make an observation of the additional services technology development trend of the overseas smart meter and to have a view of value-added services(VAS) system of smart meter suitable for the domestic environment based on the technology development of VAS utilizing electronic watt hour meter performed by recent research projects.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.172-174
• /
• 2007

An electronic watt-hour meter with high-precision measurement technology can provide many valuable metering data of a real-time system measurements, such as per-phase voltage, ampere, active power, reactive power, apparent power, power factor, and system frequency. Also many of accumulated metering data such as active energy, reactive energy, apparent energy, and load profile can be gettable from an electronic watt-hour meter[1]. This paper presents an approach of the small-sized AMR (Automatic Meter Reading) that provides customers with a very valuable electrical service. This AMR service transmits lots of a valuable metering data by using ZigBee communication module, so that users resided in their premises can use the information to audit a power quality and improve their electrical conditions by using the PQ monitoring device equipped with ZigBee receiver. This PQ monitoring device shows metering data on LCD and transmits to the PC through an internal network. Also, the device can keep the valuable meter data into a built-in non-volatile memory. The final goal of this paper is to better understand the power quality of electrical systems and offer the power qualify information for the convenience of all power consumers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.649-656
• /
• 2011

The increase in the traffic demand and behavioral pattern of its use reached the limit for the only means of road construction to bear; thus the multilateral efforts to find a solution to this problem together with the examination and research on this issue, among which the most representative strategy is Ramp Metering System controlling access traffic volume to connection roads. The operation standard and running time was re-established in consideration of geographical conditions and traffic circumstances by considering the standard of operation and running time of the currently operated Jangsu- Jungdong section of the outer ring expressway of Seoul. For this purpose, this research analyzed the operative standard of RMS home and abroad and suggested a new operative standard of ramp metering through the analysis of break points.

• Journal of Drive and Control
• /
• v.11 no.1
• /
• pp.8-13
• /
• 2014

Hydraulic servo valves are widely used in various fluid power systems because of their fast response and precision control. In this paper, we studied the effect of metering notch shapes and amount of their openings on the flow characteristics within the spool valve using a computational fluid dynamic (CFD) code, FLUENT. To obtain the results for more realistic operating conditions, viscous heating due to the jet flow and viscosity variation of the hydraulic fluid with temperature were considered. For two types of notch shape, streamlines, oil temperature and viscosity distributions, and variations of flow and friction forces acting on spool were showed. The flow and friction forces affected by the metering notch shapes and their openings, and oil temperature rise near metering notch was significant enough to results in the jamming phenomenon. A thermohydrodynamic (THD) flow analysis adopted in this paper can be used in optimum design of hydraulic servo valves.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.619-628
• /
• 2012

The ZigBee network has been considered to monitor electricity usage of home appliances in the smart grid network. ZigBee, however, may suffer from a coexistence problem with wireless local area network (WLAN). In this paper, to resolve the coexistence problem between ZigBee network and WLAN, we propose a new protocol constructing a cognitive smart grid network for supporting monitoring of home appliances. In the proposed protocol, home appliances first estimates the transmission timing and channel information of WLAN by reading request to send/clear to send (RTS/CTS) frames of WLAN. Next, based on the estimated information, home appliances transmit a data at the same time as WLAN transmission. To manage the interference between WLAN and smart grid network, we propose a cognitive beamforming algorithm. The beamforming algorithm is designed to guaranteeing zero interference to WLAN while satisfying a required rate for smart metering. We also propose an energy efficient rate adaptation algorithm. By slowing down the transmission rate while satisfying an imperceptible impact of quality of service (QoS) of the receiver, the home appliance can significantly save transmit power. Numerical results show that the proposed multiple antenna technique provides reliable communications for smart metering with reduced power comparing to the simple transmission technique.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.2
• /
• pp.95-101
• /
• 2006

A fuel metering unit using PWM(Pulse Width Modulated) solenoid valve has some advantages such as low cost, small size and simple structure. The mathematical model and its experimental rig of the fuel metering unit using PWM solenoid valve and CPDV(Constant Pressure Drop Valve) for miniature turbo engines were constructed. As the results of simulation, some major parameters which have dominant effects on the performance were found. And the experimental results verified the validity of established model by showing the good agreement with the numerical simulation results. Hence, this system modeling could be used effectively in the actual development of a PWM fuel control system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1903-1909
• /
• 2007

As the electric power industry has been revolutionarily transformed such that the distributed energy resources have been interconnected with power systems and a variety of energy service providers have been appeared, the need of Consumer Energy Portal as a core of two-way communication and service infrastructure between power suppliers and consumers has been gradually increased. Consumer Energy Portal can be thought of as a combination of hardware and software enabling two-way communication between energy service providers and equipment within the consumers' premises or a physical and logical link between consumers' in-building networks and wide-area access networks. In other words, Consumer Energy Portal can make the way the power industry has been traditionally operated the web-based way, enabling two-way interactions between energy service providers and consumers and mutual networking between end users' equipment. Thus, Consumer Energy Portal can be a kind of Service portal that provides new value-added services and efficient power operations that in the past. In this paper, for ESPs' integrated resources management, demand side management and value-added service provision, we have established the two-way access network that can gather real-time metering data using ZigBee technology and control physically networked equipment.